KillaKAW4Life
Expert Class
Posts: 348
|
posted June 26, 2008 02:34 PM
What are you seeing?
For guys that have gotten their 14s DYNOED...
What number are you seeing with Stock Motor w pipe and removed flies, PC3?
  
|
johnnyrocketzx14
Expert Class
Posts: 207
|
posted June 26, 2008 03:11 PM
168-175 from what i have seen.........oh and +/- 10 HP for weather conditions, & altitude. The simple fact is that all dyno's read different....
I wouldn't dwell too much on the numbers, but it is a great tool to get a base line for before and after results when doing mod's on your bike or just tuning AFR....
I know shops that make their dyno's read high cause it makes customers feel good, others may read low..IMO
____________
07 ZX14
Brocks Sidewinder, Stretched, lowered, strapped,Drag seat, PCIII W/Hub, No flies, BMC, Speedo Healer, Muzzy NOS/Shifter,
1.41 60, 5.77 1/8th 8.89 1/4
|
lietoome
Needs a job
Posts: 2033
|
posted June 27, 2008 05:15 AM
173/101tq Brock Gen3(2006)
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted June 27, 2008 05:44 AM
 Edited By: CrotchRocket on 27 Jun 2008 06:45
You guys also need to give the location, date, temp and gas used with those Dyno Numbers!!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
BobC
Pro
Posts: 1736
|
posted June 27, 2008 05:50 AM
Edited By: BobC on 27 Jun 2008 06:57
See below: with ordinary pump unleaded fuel, sea level, 60 degrees, air pressure? not sure.
That's a custom map after 35 Dyno runs. Oh, and the pipe is a TiForce.
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
flatoutbu
Pro
Posts: 1054
|
posted June 27, 2008 05:53 AM
06 14, Ryan Schnitz dyno...May something of last year...190 hp and 111 ft trq SAE
Brock sidwinder,pc3,flies removed no air filter 8 inchs over..shinko and u4.1.
When i bought the bike brand new in 06 i had it dyno'd on the same dyno with a brock gen3 and pc3...stock WB and it put down 187hp and 107 ft trq. I figure with the shinko and 8 more inchs of stretch is why i seen only a 3 hp gain over the gen 3 system...even with it tuned on race gas.
My bike has always put down good numbers...even Ryan admitted that. I have rode my bike the way i wanted and never really followed any break in procedures.
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
Evilsports
Expert Class
Posts: 119
|
posted June 27, 2008 05:57 AM
I'm running a custom map a buddy had done on his 08. Both with TiForce Hi Mount, Race Filter, negligible altitude differences. His was dialed in at 187 and 110.
|
reward69
Expert Class
Posts: 101
|
posted June 27, 2008 06:30 AM
179.3 HP 2600Ft elevation, 93 pump, flies removed, SMEG with Brocks street track map.
2008 Silver
|
kiwi
Parking Attendant
Posts: 26
|
posted June 27, 2008 07:55 AM
Yoshi slipons, flyless, PC with custom map.
170/101.
|
lowcel
Expert Class
Happy on 2 wheels.
Posts: 157
|
posted June 27, 2008 08:24 AM
Damn, these things suck! I had a guy at bike night last night making fun of me for buying a ZX14. He said his new 08 busa (bone stock) puts out over 200 hp! It wasn't easy, but I did manage to keep from falling down laughing.
For what it's worth, while at Myrtle Beach I had mine on the Teresi Dyno Drag and showed 183 hp to the wheel. Temp was in the 80's and elevation was probably in the teens to twenties.
____________
2007 Z14 SE - Yoshimura TRC full race exhaust w/ carbon can - PCiii w/ map from HPC - Flies removed - Pipercross air filter - Speedohealer - Puig Double Bubble - Fender Eliminator - GPR Steering Damper - Puig Frame Sliders - HID's - Halo's
|
super_sadie_
Novice Class
Posts: 46
|
posted June 27, 2008 08:44 AM
Custom Pipe, pc3, flies out, 176hp/109tq
|
sweetfa65
Expert Class
Posts: 110
|
posted June 27, 2008 06:59 PM
Edited By: sweetfa65 on 27 Jun 2008 20:06
quote:
168-175 from what i have seen.........oh and +/- 10 HP for weather conditions, & altitude. The simple fact is that all dyno's read different....
I wouldn't dwell too much on the numbers, but it is a great tool to get a base line for before and after results when doing mod's on your bike or just tuning AFR....
I know shops that make their dyno's read high cause it makes customers feel good, others may read low..IMO
+1
Glad to hear that, as I was getting a bit anal about the numbers myself.
With Staintune exhausts, no flies, PCIII, custom map, mine put down 173.54HP/102.92TQ. (baffles out)
171.70HP/102.42TQ (baffles in)
36deg C, 18% Hum. 98Prem pump fuel.
Likewise, I love the stories about 190+HP from bone stock bikes 
Got a mate that claims 186HP from a Honda 1100 Blackbird with a pipe. Luckily I used the same Dyno and got him to print my bike and his, back to back. Can't wait to see his face 
____________
'2013' SE Spark Black & Golden Blazed Green ZX14R. Bog stock after trading my 07 ZX14.
|
fifth
Expert Class
The Magnificent Bastard
Posts: 303
|
posted June 27, 2008 08:51 PM
Bone stock was 169.4 rwhp and 100.9 torque... 85 degress and don't know the eleation (whatever it is for Wichita Falls, Texas)
|
killakaw4life
Expert Class
Posts: 348
|
posted June 28, 2008 08:02 PM
thanks guys keep em coming!!!
|
smokinzx14
Needs a life
Posts: 10197
|
posted June 28, 2008 10:16 PM
I have no idea what my dyno numbers are but for the ETs and MPH i'd guess close to 180 hp .... 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted June 29, 2008 05:59 AM
3 billlion horsepower, no seriously, in reference to an above post what would the length of the swingarm have to do with power output on a dyno?
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
bayou boy
Expert Class
Posts: 147
|
posted June 29, 2008 07:04 AM
183 with flys out--brock smeg,pc, 175 with flys in
|
butterthegreat
Expert Class
Posts: 329
|
posted June 29, 2008 08:13 AM
171/101 bone stock. 200 feet above sea level, 70 degree with 11% humidity.
|
NCZX14
Expert Class
Posts: 108
|
posted June 29, 2008 08:37 AM
quote:
3 billlion horsepower, no seriously, in reference to an above post what would the length of the swingarm have to do with power output on a dyno?
The longer the chain the lower the hp.
____________
2K7 everything possible without going in the engine.
|
Hawkman
Zone Head
Posts: 747
|
posted June 29, 2008 08:41 AM
Group of riders and I went to a free dyno day sometime back. Four ZX-14s participated. Stock bikes did 160-161. Muzzy full system did 171. Mine with Brock's Gen 3 carbon can did 174.
|
KawaBonzai
Zone Head
Leader of the Back.
Posts: 537
|
posted June 29, 2008 01:27 PM
173.69hp / 101.33 torue at 2400 foot elevation, 100 degree days.
Muzzy M14 / M10, BMC Race Filter, PC-III USB, Flies Out, Pump gas
____________
PC-III w/USB, Muzzys M14 + Carbon Oval + M10, BMC Race Filter, Flies Out, Buell Pegs, Heli Risers
www.TucsonSportRiders.com - Tucson's Premier SportRider Community
|
KawaBonzai
Zone Head
Leader of the Back.
Posts: 537
|
posted June 29, 2008 01:29 PM
quote:
183 with flys out--brock smeg,pc, 175 with flys in
Since when does flies out increase top end power, after 7k rpm they'd be wide open anyway. What am I missing here?
____________
PC-III w/USB, Muzzys M14 + Carbon Oval + M10, BMC Race Filter, Flies Out, Buell Pegs, Heli Risers
www.TucsonSportRiders.com - Tucson's Premier SportRider Community
|
fish_antlers
Administrator
The Truth is Out There
Posts: 21896
|
posted June 29, 2008 02:16 PM
Just dyno'd our 08 busa... bone stock it made 170.8 hp SAE, 101.2 tq.
will report back with results from mods.
____________
What business is it of yours where I'm from, Friendo?
|
smokinzx14
Needs a life
Posts: 10197
|
posted June 29, 2008 03:06 PM
quote:
Just dyno'd our 08 busa... bone stock it made 170.8 hp SAE, 101.2 tq.
will report back with results from mods.
Yup the new busa seems to be a dyno queen ...Numbers at the track don't seem to back up the dyno numbers .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
jus cruisin
Novice Class
Old Dude
Posts: 53
|
posted June 29, 2008 04:28 PM
We are seeing 158-159 for stock 2008's. Stock 06-07's are 164ish (not many stockers around). My 2008 was 159 bone stock and 174 with a M-10 Muzzy, PCIII , Dynojet map, flies in. Lost 2hp removing the flies so I put them back in. Just took off the Muzzy off and put on a Yoshimura TRC full system. I will dyno it next week. By the way, the stock 08's have a 6-10 hp gain over the sock 06-07's between 4,000 and 6,000 rpm even though the max hp is down.
____________
2008 ZX-14 Midnight Sapphire Blue
|
|
|
HOME
NEW TOPIC