oldkawboy
Needs a job
Posts: 2125
|
posted March 25, 2008 06:04 PM
16 tooth countersprocket......
Tried the search but no luck.
I'd like a OEM front sprocket with the rubber dampner. Does anyone know which model Kawasaki has a 16 tooth for the 530?
Thanks,
Dan
  
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted March 25, 2008 06:27 PM
i dont think there is one Dan, i had to buy the vortex POS. i like runnin the zx11 countersprocket on the 12 though!
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
lietoome
Needs a job
Posts: 2033
|
posted March 25, 2008 08:26 PM
I don't think anyone makes a 16t dampened sprocket. I'm using the zx11 countersprocket and added teeth to the rear. I truely dislike undampened sprockets. I'm running 17/45 and LOVE it. I don't believe that will fit on a stock chain though.
Damn, I forgot. What is stock on the 14?
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted March 25, 2008 08:44 PM
jeff, the zx11 countersprocket fits on the 14...? thought it only worked for the 12
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
zx14mike
Zone Head
Posts: 891
|
posted March 25, 2008 09:04 PM
The ZX11 Countersprocket "IS" the ZX14's..........they are one and the same!
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted March 25, 2008 09:10 PM
AH-HA! did not know that zx14mike, just though the 11 and 12 were interchangable.
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
oldkawboy
Needs a job
Posts: 2125
|
posted March 26, 2008 05:14 AM
Yeah we've installed the 12's sprocket on the 14 to up the limiter for top speed runs but now I'm wanting to go down one tooth.
I would have thought that there would be a factory one on some model that would work.
Thanks guys,
Dan
|
smokinzx14
Needs a life
Posts: 10197
|
posted March 26, 2008 07:47 AM
 Edited By: smokinzx14 on 26 Mar 2008 08:49
quote:
Yeah we've installed the 12's sprocket on the 14 to up the limiter for top speed runs but now I'm wanting to go down one tooth.
I would have thought that there would be a factory one on some model that would work.
Thanks guys,
Dan
Try a z1000 sprocket , it's a 16 tooth with damper from the factory ... I know it fits on my ZRX1200 (same as zx11) and that should fit the zx14 ...
P/S not the old z1000 but the new one ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted March 26, 2008 08:11 AM
LOL...
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
ronaldnn
Parking Attendant
Posts: 1
|
posted March 26, 2008 02:50 PM
Let us know if you try that Z1000 16 tooth with the dampner and if it fits...I might go with it too...Thanks Ron
|
oldkawboy
Needs a job
Posts: 2125
|
posted March 26, 2008 04:15 PM
I had a chance to do a little research and it looks like the 92-95 ZR1100 (Zephyr) sprocket may work. It appears to be a 16t 530. The Z1000 looks like a 525 according to EK's webpage.
I'm leaving at daybreak heading to the Texas Mile......Yee-Haw! So it'll be a week before I pursue this any farther.
Thanks again folks for the replies.
Dan
|
warbird
Needs a job
Posts: 2739
|
posted March 26, 2008 04:44 PM
Good luck Dan...............have a safe trip and have lots of fun!!  Are the boys going with you? If so, tell them I said good luck!!! 
____________
I'd Rather Be Roadracing.
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted March 26, 2008 05:03 PM
I know your waiting on me Dan.....OEM # 13144-1317.....
Thanks to Zach 
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
madkawboy
Expert Class
Posts: 398
|
posted March 26, 2008 06:42 PM
Edited By: madkawboy on 26 Mar 2008 19:48
Yeah the 1992-1995 Kawasaki ZR1100 OEM is a 16T which is 1 down from a ZX14.
WARBIRD- No, Chad and I are not going. We are not retired and getting travel around the world and getting to do all the fun stuff old retired people get to do like somebody i know......
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
oldkawboy
Needs a job
Posts: 2125
|
posted March 26, 2008 06:44 PM
Charles,
It's just me & momma going for this time. Thanks!
Rick,
Thanks for the part #, did Zack get you one?
Dan
|
lietoome
Needs a job
Posts: 2033
|
posted March 26, 2008 07:26 PM
Good Luck @the Mile!
|
GUNNER
Needs a life
Posts: 5778
|
posted March 26, 2008 08:15 PM
I tell ya Dan.... Getting parts is a complete nightmare without Zack over there to handle shit.. It's about enough to just say fuck it....
____________
There's no such thing as a motor with no more power to give only people with no more intelligence to get it
|
VincentHill
Needs a life
Posts: 6520
|
posted March 27, 2008 09:15 AM
YOUNG People being retired!! OLD People Working and on the road! What is the WOrld coming to??
____________
Made History @ Daytona and still one fast old man!!
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted March 27, 2008 04:10 PM
He sure did Dan...Thank You and him
I know how you feel GUNNER 
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
warbird
Needs a job
Posts: 2739
|
posted March 27, 2008 04:19 PM
quote:
Yeah the 1992-1995 Kawasaki ZR1100 OEM is a 16T which is 1 down from a ZX14.
WARBIRD- No, Chad and I are not going. We are not retired and getting travel around the world and getting to do all the fun stuff old retired people get to do like somebody i know......
Heh heh heh............................. 
.
____________
I'd Rather Be Roadracing.
|
GUNNER
Needs a life
Posts: 5778
|
posted March 28, 2008 08:03 AM
I tell ya and anyone else.....................If you have never had a good parts guy to handle shit for you than you have just had a hard life....
There was a day when all I had to do was let Zack know what I wanted and it appeared ALWAYS RIGHT! and ALWAYS when I needed it....
I had to call Zack just this week 1 year after he left the shop to get help resolving a simple brake line issue that at one time would have been a piece of piss !
If I ever win the lottery I'm building the BIGGEST motorcycle shop EVER dreamed possible, AND I'll assure everyone Zack won't be able to refuse the pay I'll give him to run the coolest parts department ever..
Come on POWERBALL !!!!!!!!!!!!!!!!!!!!!!!
____________
There's no such thing as a motor with no more power to give only people with no more intelligence to get it
|
oldkawboy
Needs a job
Posts: 2125
|
posted March 28, 2008 06:14 PM
Gotta agree with ya Mike, it's been a bummer trying to fix up my heaps with Zack not working at the shop!
Thanks for the good words on his behalf, he makes his old pop proud.
Dan
|
madkawboy
Expert Class
Posts: 398
|
posted March 28, 2008 06:23 PM
Edited By: madkawboy on 28 Mar 2008 19:23
Thanks for the kind words guys. I really miss the bike shop. If i can ever help anybody just shoot me a PM .
GUNNER- I'll go in with ya to buy them winning lottery tickets !
Thanks again !
-- Zack
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
|
|
HOME
NEW TOPIC