HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Shifter??? NEW TOPIC NEW POLL POST REPLY
SPECIAL EDITION ZX-14


Novice Class
HIGHLANDER-THERE CAN BE ONLY 1
Posts: 71
posted March 29, 2008 01:28 PM        
I have had a power commander quickshifter on my ZX for a year now, foot only no button. Mine is set up to shift at + 5000 RPM and it works flawlessly with no hesitation even full throttle up to redline.(where I shift!) Its about $300 and works with the PC111.
____________
WHITE SPECIAL EDITION, TWO BROTHERS EXHAUST, FENDER ELIMINATOR, HELI BARS, FLIES OUT, PC111, QUICKSHIFTER, CUSTOM MAP BY DYNOWORKS OF SARASOTA, WHITE FRAME SLIDERS, Michelen STs GEL POWER GRIPS.
2009 H-D ROAD GLIDE, METALLIC ORANGE PEARL!! SOLD AND BOUGHT A NEW CAMARO

  Ignore this member   
lietoome


Needs a job
Posts: 2033
posted March 30, 2008 09:47 PM        
Special, what does 5000 rpm have to do with settings? Aren't you foot shifting? How did you attach it to your shift lever?

thx
JB

  Ignore this member   
johnnyrocketzx14


Expert Class
Posts: 207
posted March 31, 2008 06:44 AM        
meant clutch-less shifts are not active until over 5000 rpm, so cruising around in town it doesn't use the ignition, or fuel kill when shifting. Its a pressure switch inline with his shift lever that senses the shifter movement that activates the kill time
____________
07 ZX14
Brocks Sidewinder, Stretched, lowered, strapped,Drag seat, PCIII W/Hub, No flies, BMC, Speedo Healer, Muzzy NOS/Shifter,
1.41 60, 5.77 1/8th 8.89 1/4

  Ignore this member    Click here to visit JohnnyRocketZX14's homepage. 
SPECIAL EDITION ZX-14


Novice Class
HIGHLANDER-THERE CAN BE ONLY 1
Posts: 71
posted March 31, 2008 09:04 AM        
Donny at the Dynoworks in Sarasota did the installation as I wanted it to be right and it is. I could have had the shift point at anywhere I wanted it and still could change it if necessary.
I purchased it through him also, good price and good service. Ride safe!
____________
WHITE SPECIAL EDITION, TWO BROTHERS EXHAUST, FENDER ELIMINATOR, HELI BARS, FLIES OUT, PC111, QUICKSHIFTER, CUSTOM MAP BY DYNOWORKS OF SARASOTA, WHITE FRAME SLIDERS, Michelen STs GEL POWER GRIPS.
2009 H-D ROAD GLIDE, METALLIC ORANGE PEARL!! SOLD AND BOUGHT A NEW CAMARO

  Ignore this member   
lietoome


Needs a job
Posts: 2033
posted March 31, 2008 12:16 PM        
thanks for the info.
  Ignore this member   
ninja12


Needs a job
Posts: 3310
posted March 31, 2008 01:13 PM        Edited By: ninja12 on 31 Mar 2008 14:16
If you want nice clean and cheap
get a cyclinder
http://secure.mycart.net/catalogs/catalog.asp?prodid=326254&showprevnext=1

air bottle, guage and walmart air pump less than $100 or
http://secure.mycart.net/catalogs/catalog.asp?prodid=5000954

a switch http://secure.mycart.net/catalogs/catalog.asp?prodid=325331&showprevnext=1
about 10 feet of air hose and 10 feet of wire.

use the PC usb quick shifter "SOFTWARE" for your kill box.
THESE LINK ARE FOR INFO ONLY you can find some of these parts much cheaper.

I found a small air bottle that fit INSIDE the battery box with the battery. and use a $10 walmart air pump.

For $250-300 you could build a pump setup
$350-400 you could have a high pressure kit.




  Ignore this member   
ninja12


Needs a job
Posts: 3310
posted March 31, 2008 01:41 PM        
get the nitrous regulator and a spliter and you could duplicate the muzzy spray, shifter combo for less than 1/2 the price.

  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted March 31, 2008 03:31 PM        
well. the muzzy harness does have the 3 way switches, relays, solenoid, and all hoses, all the fittings, ram brackets, ram, regulator, 2 real bottles, all the wiring and instructions!
If you have the time knowledge and confidense, there is money to be saved.
Now that I have installed a muzzy kit, and been shown the light ( was a nitrous virgin ) I could do it, but unless you have experinced it, good luck.

Even at that, for the time it would take to get all the parts, search for more parts, make custom hoses, ..... set it all up, collect all the connectors etc, really the muzzy kit is a pretty good deal.

anyway, the difference between low pressure and high is, you need to get your bottles filled with high pressure, low pressure run your own pump, and if you have an arm with air chamber, no bottle needed at all!.

My new arm will have a compartment for the compressor, and the battery!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.

  Ignore this member   
Sticks_n_Stones


Needs a job
Posts: 3930
posted April 01, 2008 09:04 AM        
fit any luggage in there Dubious? lol Are you seriously going to put the battery and compressor inside your swingarm??? Doesnt that extra weight placed onto a extra heavy to start with arm very negatively affect the handling and suspension action of your bike?? Granted you can just run a heavier spring, and maybe heavier fluid in the shock, but still...
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...

  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Shifter??? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21814513206482 seconds processing time