kawasakijockey
Pro
Posts: 1876
|
posted December 27, 2007 01:14 PM
How many links?
I got a great price on some 6 inch extensions for the 14. How many links does the chain need to be to run out the full 6inch? I've tried searching the forum but didnt have any luck.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
  
|
ninja12
Needs a job
Posts: 3310
|
posted December 27, 2007 02:30 PM
Don't know but many of the bolt-on can't use the full extention IF you want to maintain the rear brake. You may want to check before you get too excited about the 6 inches.
The brake support will only work out to about 4 inches. hope you got the good ones that go all the way back.
|
kawasakijockey
Pro
Posts: 1876
|
posted December 27, 2007 02:37 PM
OK, I see. These are Yani Shiki.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
Tool Man
Needs a job
Posts: 4493
|
posted December 27, 2007 04:12 PM
Stock is 116 links...Pitch on a 530 chain is .625 inchs pin to pin.
So... 6" / .625 = 9.6 * 2 = 19.2
So....A 6 inch extension wiil require 19.2 links with stock gearing, add or subtract your gearing selection +1 for one tooth bigger rear and so on...
Here is some info on spockets and chain http://www.gizmology.net/sprockets.htm
____________
The banks are failing..
The banks are failing...
Invest in Ammo
|
zx14kawboi
Novice Class
just wanna be fast
Posts: 70
|
posted December 27, 2007 06:21 PM
 Edited By: zx14kawboi on 27 Dec 2007 18:22
brake line will work; mine does but it wont hook up at all on the street. i had to bring my roaring toys ext . in as far as i could just to find traction .i think it is about 3" over now maybe 4
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted December 27, 2007 06:34 PM
Buy a 140 pin chain and you'll probably use about 134-136 pin with 1 down in front sprocket and 2 up in rear sprocket...
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
blackbullet76
Pro
Posts: 1134
|
posted December 27, 2007 07:06 PM
I had mine at 6.5 inch stretch, 1 tooth down in the front and 3 up in the back. I put it back stock after the racing season was over with. I got an aftermarket 150 link dragchain for this setup. I can't remember how many links I removed, but it wasn't many. Be careful on the street, traction in 2nd and 3rd is hard to come by 
____________
2007 ZX-14 black
Brocks s-meg exhaust
PCIII w/track map
BMC race filter
Flies removed
16 tooth front sprocket
Speedohealer
APE cam chain tensioner
Vortex rearsets
|
Tool Man
Needs a job
Posts: 4493
|
posted December 28, 2007 05:23 AM
quote:
Buy a 140 pin chain and you'll probably use about 134-136 pin with 1 down in front sprocket and 2 up in rear sprocket...
Ya....math is hard, Do what he said ^^^ 
____________
The banks are failing..
The banks are failing...
Invest in Ammo
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted December 28, 2007 07:43 AM
on schnitz they have chain and sprocket combos that tell you the needed info
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
|
|
HOME
NEW TOPIC