APE Jay
Novice Class
Posts: 59
|
posted August 27, 2007 09:42 AM
 Edited By: APE Jay on 27 Aug 2007 10:43
Chip Hunter's Indy Fast Times is up.
http://www.aperaceparts.com/fasttimes.html
____________
http://www.aperaceparts.com/
   
|
stevewfl
Moderator
Posts: 27920
|
posted August 27, 2007 10:25 AM
Hi Ape,
Do you know if Chip plans to continue racing with the ZX14, or will he give up the bike for the '08 'busa as weapon of choice?
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted August 27, 2007 12:06 PM
LMFAO....
Bahahahahahaa
Hey stevvie wonder...
Me thinks his name is Jay and works for APE .....
(still laughin) LOL
Pardon him Jay! he bin racin around in circles too much!
Jay,
Good write up, 
How about some technical pics for the readers, lets see how the equipment is laid out under the seat/ hood!
some idea's of how the pro's do it!
LOLstevvie steviie!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
SteddyTeddy
Pro
Posts: 1664
|
posted August 27, 2007 12:20 PM
The Busa that Johnny put together is one bad mofo and Vic doesn't know how to lay off the throttle.
|
stevewfl
Moderator
Posts: 27920
|
posted August 27, 2007 12:32 PM
quote:
LMFAO....
Bahahahahahaa
Hey stevvie wonder...
Me thinks his name is Jay and works for APE .....
(still laughin) LOL
Pardon him Jay! he bin racin around in circles too much!
Jay,
Good write up,
How about some technical pics for the readers, lets see how the equipment is laid out under the seat/ hood!
some idea's of how the pro's do it!
LOLstevvie steviie!
Yes JAY, please pardon me. And forgive me for not being familiar with, nothing against you but I follow road racing more-so than drag racing. Per my question above, I really am wondering if Chip Hunter will be racing the '08 Hayabusa?
Thanks again, Steve
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
APE Jay
Novice Class
Posts: 59
|
posted August 28, 2007 12:05 AM
Gentlemen;
Chip's e-mail address is over on the right in his column. Shoot him an e-mail and he will be more than happy to answer you.
Jay
____________
http://www.aperaceparts.com/
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted August 28, 2007 03:02 AM
Man just reading that got me excited as hell! Anybody know he has done to the bike?
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
chunter
Expert Class
Posts: 195
|
posted August 28, 2007 05:24 AM
ported head, 4mm stroker crank, stock bore, stock valves, stock cams, nos pistons, lock up, wet nos system, sidewinder, stock shock, 64" wheelbase...lots of headaches
|
smokinzx14
Needs a life
Posts: 10197
|
posted August 28, 2007 07:01 AM
quote:
ported head, 4mm stroker crank, stock bore, stock valves, stock cams, nos pistons, lock up, wet nos system, sidewinder, stock shock, 64" wheelbase...lots of headaches
lol lots of headaches lol... ... That's why they call it drag racing because sometimes it's a real drag !!!!! Keep up the good work Chip , it will pay off in time ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
chunter
Expert Class
Posts: 195
|
posted August 29, 2007 04:29 AM
I've been racing and working on bikes for years from 600's to Prostock and the 14 and it's electronics have been the most finicky I have ever ran into...
|
bishopzx12
Zone Head
Posts: 517
|
posted August 29, 2007 07:27 AM
Chip what hp/trq number are you getting out of that set-up. Man I think i may order the pistond today to get started on my winter collection of parts. How is the 4mm crank trating you have you had any bearing trouble.
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
chunter
Expert Class
Posts: 195
|
posted August 29, 2007 08:32 AM
210rwhp with C16 fuel in it and a shinko tire, makes over 100lbs torque from 4500rpm to nearly the limiter.
Crank is fine and no bearing issues with good ol Redline oil.
|
serius blk
Zone Head
Posts: 543
|
posted August 29, 2007 05:50 PM
brocks motor setup with the 14 milled head, head work and stock everything else made 205 rwhp. Seems it would be more economical to just do the head work to the bike. That just if your on a budget.
|
warbird
Needs a job
Posts: 2739
|
posted August 29, 2007 06:40 PM
100 + ft lbs from 4500 on..................whoa................ 
____________
I'd Rather Be Roadracing.
|
SteddyTeddy
Pro
Posts: 1664
|
posted August 29, 2007 06:59 PM
Brocks 205 rwhp was on MR9 fuel. 210 on C16 is very good. That would be 220+ on MR9! C16 kills HP when not spraying.
|
bishopzx12
Zone Head
Posts: 517
|
posted August 30, 2007 03:57 AM
How much is the brock head work going to cost a guy on a budget
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
chunter
Expert Class
Posts: 195
|
posted August 30, 2007 08:16 AM
Keep in mind that my motor was built for NOS and C16 is not a good all motor fuel. If I switched to MR9 or MRX01 I'd be up 10 easy and then pull off the shinko tire and up another 5-6.
|
|
|
HOME
NEW TOPIC