mark524
Expert Class
Posts: 297
|
posted June 28, 2007 05:33 PM
60' times stock wheelbase
what's everyones best 60' with stock wheelbase? I'm lowered & strapped, & 16t sprocket. I'm 290 in leathers. I had a best of 1.68 last night. Thanks.
  
|
Halvefast
Zone Head
Posts: 806
|
posted June 28, 2007 06:02 PM
I'm 245 in leathers, at stk length my best were 1.66
But I'm going back to stk length soon, and expect the short times
to drop from what I learned with the extensions installed.
It taught me how to launch the bike and took the fear of looping it away.
When I first tried to leave @ 63" the same way as before, there was no improvement at all.
So I had to learn to whack it open and leave with the clutch not throttle.
Go to Brocks website, watch him run 9.20 @ stk wb, it is in the multi-media library.
|
mark524
Expert Class
Posts: 297
|
posted June 28, 2007 09:44 PM
 Edited By: mark524 on 28 Jun 2007 22:45
My 1.68 was a good launch, but I was fighting a wheelie so bad. I had to let off alot. Still that run was my best et at 10.27. My plan was to do all the power mods and stay at stock wb. It would be easier to just get the extensions, but I want to see what a fat guy can do stock wheelbase.
|
matt1400
Parking Attendant
Posts: 28
|
posted June 28, 2007 10:57 PM
Mine is 1.58, only got it the other day on a 9.77 pass, with 16t, slip ons and PC with TRE. keep at it and the times will drop 
____________
Its Busa bashin' time!
|
Nelson Taylor
Zone Head
Posts: 927
|
posted June 29, 2007 11:55 AM
1.58-1.61
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted June 29, 2007 12:04 PM
1.53 60'. wee
|
smokinzx14
Needs a life
Posts: 10197
|
posted June 29, 2007 01:40 PM
Edited By: smokinzx14 on 29 Jun 2007 14:46
quote:
1.53 60'. wee
Dang Wee thats flyin !!!! Here is my best at stock wheel base, it not my best 60 foot but my best 1/4 mile pass at stock wheel base ..Flys in, stock gears, pump gas..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
madkawboy
Expert Class
Posts: 398
|
posted June 29, 2007 01:44 PM
1.56 with butterflies still in and stock exhaust. 1 down in the front
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted June 29, 2007 02:44 PM
Edited By: Wheelie on 29 Jun 2007 15:47
I have the wheelie problem with the stock wheelbase, so my 60's will be faster soon, 8" extentions are right behind me waiting to be installed. wee
|
mark524
Expert Class
Posts: 297
|
posted June 29, 2007 08:23 PM
i went to a new track tonight. My first pass out I busted out a 1.58. Unfortunately, I let off early because I didn't know where the traps were and ran a 10.44 @ 100. I'm an idiot. I couldn't repeat it and stayed around 1.65-1.67. Oh yeah, on the 1.58 I forgot to tighten the strap, go figure! New best of 10.19, I want a 9 so bad.
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 29, 2007 08:36 PM
The weight transfered better unstrapped at 60 feet , but alas how was the wheelie and 330 ft time?
|
mark524
Expert Class
Posts: 297
|
posted June 29, 2007 08:57 PM
quote:
The weight transfered better unstrapped at 60 feet , but alas how was the wheelie and 330 ft time?
60' - 1.5853
330 - 4.3961
1/8 - 6.5900
1/4 - 10.466 @ 103 
it didn't wheelie bad at all, no worse than usual, maybe better. I may have to try just strapping it down a little. I may be on to something.
|
FastBlur
Parking Attendant
Posts: 23
|
posted June 30, 2007 11:01 AM
Edited By: FastBlur on 30 Jun 2007 12:02
A 1.51 60', 3.99 330', 5.98 @ 122 mph 1/8 and 9.18 @ 151 mph 1/4 in hot and humid Valdosta yesterday. Stock wheelbase, Brock Smeg, Brock track map, flies out, -1 +2, lowed, VP gas, footshifting, and still running thick factory oil. I leave at 4500 and get off the clutch and full throtle about 40' out the hole. The 1.51 60' was a one time thing but I can get 1.53 - 1.55 60's all day long. Can't wait to get an airshifter, go to synthetic oil, and cool weather to see what this bike can really do. 8's on stock wheelbase is a real possibility.
|
mark524
Expert Class
Posts: 297
|
posted June 30, 2007 11:12 AM
quote:
A 1.51 60', 3.99 330', 5.98 @ 122 mph 1/8 and 9.18 @ 151 mph 1/4 in hot and humid Valdosta yesterday. Stock wheelbase, Brock Smeg, Brock track map, flies out, -1 +2, lowed, VP gas, footshifting, and still running thick factory oil. I leave at 4500 and get off the clutch and full throtle about 40' out the hole. The 1.51 60' was a one time thing but I can get 1.53 - 1.55 60's all day long. Can't wait to get an airshifter, go to synthetic oil, and cool weather to see what this bike can really do. 8's on stock wheelbase is a real possibility.
i still have flies in. does taking them out make it hard to launch. I've been thinking about taking them out buy I'm afraid it will wheelie more. Also, did you pick up et when you took them out. Thanks.
|
FastBlur
Parking Attendant
Posts: 23
|
posted June 30, 2007 11:27 AM
Edited By: FastBlur on 30 Jun 2007 12:28
i still have flies in. does taking them out make it hard to launch. I've been thinking about taking them out buy I'm afraid it will wheelie more. Also, did you pick up et when you took them out. Thanks.
With the flies in I got a 1.53 60' the first time I ran the bike so I'm not sure if it really makes a difference in your 60' times, I just had to launch at a higher rpm (5500) with them in. I think the reason I got down to 1.51 60's had more to do with going -1 +2 on the gearing. Don't know how much the flies helped on ET because I changed multiple things when I took them out.
|
|
|
HOME
NEW TOPIC