zx14r191
Novice Class
Posts: 54
|
posted May 16, 2007 08:12 PM
Flies out finally!!!
Finally did the deed - 90 mins start to finish including ride up street. Custom map from friend of mine up in Oregon. Took out for a quick spin and holy mother of torque finally more impressive than my seriously built 01 R1. Little glitch around 2500rpm or so but the rest feels good. Will report more findings. Pulls noticeably harder even in 6th from 4K - Kawi really bogged it down all the way through the gears it seems.
Keep putting the smack down.
S.
____________
06 ZX14
04 R1 - race bike
01 R1 - big bore stroker - 191 rwhp
06 ZX6R - wife's
  
|
dutchzx14
Expert Class
Posts: 213
|
posted May 16, 2007 11:27 PM
Now go for the pc3, and load a no flies map. it wil go another step better. if you have a open exaust ,put the bars up with two bars at the whole rpm range.
|
coferj
Parking Attendant
Posts: 30
|
posted May 17, 2007 04:26 AM
I don't know what dutch means by the bars thing, but I agree with the pc3. It runs a tad lean once the flies are removed...plus, if you ever decide to pipe up, you already have the pc3, just load another map.
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted May 17, 2007 03:29 PM
oh yea the map and pc will be another step up, really amazing
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
zx14r191
Novice Class
Posts: 54
|
posted May 17, 2007 08:32 PM
Sorry guys did make it clear. Have PCIII USB installed - the map i used had a minor glitch right at the very bottom ~~ 2500 rpm. Fixed it tonight by adding some fuel in this area. Thing pulls like a train - much stronger low down than I remember my ZX12R being. Now my wife will not be able to pull me from the lights on here 636.... LOL
S.
____________
06 ZX14
04 R1 - race bike
01 R1 - big bore stroker - 191 rwhp
06 ZX6R - wife's
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted May 19, 2007 07:45 AM
sorry you had to pull the flies to beat the wife 
|
dutchzx14
Expert Class
Posts: 213
|
posted May 22, 2007 09:14 AM
Thats what I ment by putting two bars up ... other words, put the leds on your pc3 two leds up on the whole rpm range. it wil pull like a beast.
|
zx14r191
Novice Class
Posts: 54
|
posted May 22, 2007 04:35 PM
I may well try this at the weekend. With the latest map it seems very linear with little to no hesitation. Comes on strong at 3K - how does everybody else's pull below 3K??
S.
____________
06 ZX14
04 R1 - race bike
01 R1 - big bore stroker - 191 rwhp
06 ZX6R - wife's
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted May 22, 2007 06:23 PM
HARD, but it ain't no FJR1300...that suckre pops wheelies at 2000...ouch!
____________
FYYFF!!!
|
ouijonbu
Novice Class
Ride with pride
Posts: 35
|
posted June 03, 2007 01:06 PM
14ners,
Can i pull my flies without having a pc, will it mess anything up . help, I am surrounded by busas, and everyone wants a title shot.
____________
82nd Airborne"when you care enough to send the very BEST
|
BBoy1255
Parking Attendant
Posts: 22
|
posted June 03, 2007 08:58 PM
is the bike hard to control now that the flies are out
|
zx14r191
Novice Class
Posts: 54
|
posted June 04, 2007 07:10 PM
With a good map the fueling is fine - no on/off hesitation at all. You have to pay more attention when feeding in throttle at lower rpm's since there is sooooooo much more go, I was reluctant to do it but after 3k miles I am glad I did for sure - if I was not careful my wife's 636 would pull me out of the tight corners where you would expect a 1400 to leap off the turns. LOL. With the flies out it behave like it should do!!
S.
____________
06 ZX14
04 R1 - race bike
01 R1 - big bore stroker - 191 rwhp
06 ZX6R - wife's
|
ZXGRIFF
Expert Class
Posts: 184
|
posted June 04, 2007 07:28 PM
Thanks to the "fly" removal, I took Deal's Gap, from start to finish, in second gear! It has much more power down low. The down side is, it loves tires!
|
|
|
HOME
NEW TOPIC