bishopzx12
Zone Head
Posts: 517
|
posted December 28, 2006 03:28 PM
power commander map loading
Hey guys i have a question that i want to pose. I recently recieved a map from a friend of mine who had his 14 dynoed. When loading th emap i had some difficulty. Once everything was connected and i was able to read the rpm and duty cycle i tried to send the map by pressing send map. It gave me an error message. I close the box and hit get map. IN the dialog box at the bottom center it said retrieving map and the map that i just tried to send popped up. I then hit send map again and the map sent successfully and gave me a dialog box map sent successfully. Have any of you guys experience this also is the send table/send map function the same just as the get map/get table buttons?????? I think i loaded my map okay i am going back outside to check. My partner bike dynoed at 180hp and 112 lbs/tq his bike set-up is a muzzy full system,flies removed, and the metal screens on the back of the air-filters removed. On the same dyno on the same day right after one another another buddy of mine 14 dynoed at 171 hp and 105 lbs/tq he has the same mods except instead of a full muzzy he has the area P's slip ons.
What do you guys think of the numbers and mc pcIII usb problem. THe map are legit they were done in jacksonville by a known dyno operator Vincent Hill can vounch for this guy. Say this guys really knows his shit.
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
  
|
iflyphi
Zone Head
Posts: 542
|
posted December 28, 2006 03:38 PM
Tq's a little high, but the hp #'s are inline with everybody else.
Problem loading maps may be due to having one of the original ZX10R powercommanders ported over to use on the ZX14. Simply highlight the map, click copy, then open up a new blank map, click paste, then load.
|
bishopzx12
Zone Head
Posts: 517
|
posted December 28, 2006 03:49 PM
iflyphi big daddy i thought the same about the tq numbers but hey if that what he got then that what he got. I have another question to pose once loading a map do any of you guys set the throttle postition also. I mean i set the one on my pcIIIr on my 12 once i loaded a map or do you just hit send map one its be verified sent you just walk away. Oh yeha i went basck out to the bike and hooked everything back up and hit get map and the one that i had loaded popped up so i think it has been sent sucessfully
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
bishopzx12
Zone Head
Posts: 517
|
posted December 28, 2006 04:33 PM
iflyphi i was wron just got off the phone with my buddy he had 107 ft-lbs of tq
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
iflyphi
Zone Head
Posts: 542
|
posted December 28, 2006 05:12 PM
Thats pretty stout in the Tq department, you got a goood map.
I've never set the throttle position. Not sure if it would do anything anyway.
|
Tool man
Needs a job
Posts: 4493
|
posted December 28, 2006 08:05 PM
quote:
Thats pretty stout in the Tq department, you got a goood map.
I've never set the throttle position. Not sure if it would do anything anyway.
Ya.. I wondered the same. Running an S-meg and Pc III now. Flies in, stock filter.
Big differance from stock 
Next Flies mod and 16t and maybe a 42 or 43 out back
Does K & N make a better filter yet ?
____________
The banks are failing..
The banks are failing...
Invest in Ammo
|
bishopzx12
Zone Head
Posts: 517
|
posted December 29, 2006 10:33 AM
Man only in our dream though these filters are easier to remove out and in unlike the 12i think i will wait for the BMC's
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
|
|
HOME
NEW TOPIC