matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted November 28, 2006 05:36 PM
 Edited By: matt sterbator on 28 Nov 2006 17:37
quote:
thanks to all but I have lowered the pressure to 5 psi and the damn thing still spins to hell. After about the 5 pass, the bike hooked and stood straight up at 7 inches. that was the only time the tire hooked. Oh yes i will be going to the u soft next time. lesson learned.
That sounds like track prep to me.
I've run several high, and a whole bunch of low low 1.5s
... all on the same 003, at about 15psi. The very first pass I made, it spun. Next pass I burned the shit out of it and it hooked ever since.
Oh yeah, 17/48 gearing on a 195rwhp 12R, 6 over.
____________
Some day, you're going to run out of some days
   
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted November 29, 2006 12:38 PM
Yeah, I went down in the front to a 15. I am going back up to the staock 17. I wonder how far would that brong y tire in. I know that I am 7 inches as of right now.
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
smokinZX14
Needs a life
Posts: 10197
|
posted November 29, 2006 09:46 PM
quote:
Yeah, I went down in the front to a 15. I am going back up to the staock 17. I wonder how far would that brong y tire in. I know that I am 7 inches as of right now.
Maybe as much as an inch....Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
flatoutbu
Pro
Posts: 1054
|
posted November 30, 2006 06:12 AM
2 is alot to go down in the front. The front sprocket is where your get your inital hit when you let your clutch out, your probaly shocking the tire too much when you let the clutch out. Being on the street doesnt help much either, mine just blows the tire off whenever it wants....
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted November 30, 2006 10:59 AM
I know that is a lot to go down on. It seems as if the bike does not have enough legs anymore. I am shifting so fast in the 1/4 now until it's pitiful. Not liking this at all. especially as hard as I am used to launching. this bike is kicking out enough torque to blow you out of position sometimes and it's hell repositioning and getting the leg back to the shifter.
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
flatoutbu
Pro
Posts: 1054
|
posted November 30, 2006 01:55 PM
Time for a airshifter....I love mine and wouldnt ride without it. You say if feels like it runs out, but have you actually had it hook and make a clean pass? I went 1 down in the front and 3 up in the back and my bike 60's pretty good for 7 inchs out. It pulls my fat ass to 1.42 60's and would do better with more arm. I plan on dropping a few pounds for next year (30) and going more arm....hoping for 1.32-1.33 sixty's next year.
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted November 30, 2006 07:32 PM
quote:
quote:
thanks to all but I have lowered the pressure to 5 psi and the damn thing still spins to hell. After about the 5 pass, the bike hooked and stood straight up at 7 inches. that was the only time the tire hooked. Oh yes i will be going to the u soft next time. lesson learned.
That sounds like track prep to me.
I've run several high, and a whole bunch of low low 1.5s
... all on the same 003, at about 15psi. The very first pass I made, it spun. Next pass I burned the shit out of it and it hooked ever since.
Oh yeah, 17/48 gearing on a 195rwhp 12R, 6 over.
I meant to say high 1.4s and a whole bunch of low 1.5s
____________
Some day, you're going to run out of some days
|
|
|
HOME
NEW TOPIC