jredone
Novice Class
Posts: 75
|
posted January 07, 2007 02:18 PM
shorty Clutch levers??
What is a good brand of shorty clutch levers.....went down the other day and scratched up the lever...not too much damage though....I have been looking for some but they are kinda hard to find...i found one brand i believe they were Pazzo or something. If you guys know of any good ones or websites i could check out that would be great...thanks
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
  
|
ninjasuz
Parking Attendant
Posts: 13
|
posted January 07, 2007 10:52 PM
http://www.pazzoracing.com/gallery.html
|
ninjasuz
Parking Attendant
Posts: 13
|
posted January 07, 2007 11:15 PM
http://www.hardracing.com/CRG.htm
|
jredone
Novice Class
Posts: 75
|
posted January 08, 2007 11:53 PM
anyone have the pazzo levers? if so, do u like em?
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
philmy3rdleg
Expert Class
Posts: 209
|
posted January 10, 2007 11:58 AM
Pazzos? Yes I have them. The levers are nice, very well made. But I don't like the shorty levers on the clutch side. So I went with a long lever on the clutch and a short on the brake. To be honest though I will never pay that much for levers again. It's better to have 10 extra cheapies in your race parts box than one set of lookers on the bike.
|
TedG
Moderator
Posts: 8222
|
posted January 10, 2007 01:17 PM
Has anyone heard of a Brembo lever for a cable clutch?
|
jredone
Novice Class
Posts: 75
|
posted January 10, 2007 04:41 PM
 Edited By: TedG on 10 Jan 2007 18:48
Ted, when i was lookin for some shortys i came across this site and it had a bunch of brembos. Someones jus gotta help me out with an assist on the link.
http://www.yoyodyneti.com/category.aspx?categoryID=2768
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
TedG
Moderator
Posts: 8222
|
posted January 10, 2007 06:50 PM
Thank you.
And your link is fixed.
|
12r1
Expert Class
Posts: 390
|
posted January 13, 2007 08:13 AM
Edited By: 12r1 on 13 Jan 2007 08:15
I'm surprised some of you mechanical/welder types don't tweak on some stockers?? Cut an inch out of the middle, weld/smooth out again? They're very soft material. I straightened my wife's GS500 clutch lever with about 5sec of the 'ol propane torch.
I have a friend, who's a pro welder...maybe I'll play with a couple levers. I have CRG adjustables on my 12 now, the stockers just hangin' in the shed..
Jeff
|
TedG
Moderator
Posts: 8222
|
posted January 13, 2007 06:11 PM
I have done the levers, grafted a 900 Ninja lever onto a ZX12 lever. It worked great and I still have the lever, But coating the lever sucks. It is easier to buy anodized levers than go through the BS.
____________
Ted
2000 Green ZX12 sold
The fast color!!
Green 2005 ZX10R
2009 Concours Black ABS
|
jredone
Novice Class
Posts: 75
|
posted January 13, 2007 10:24 PM
yea i think im gunna go for the pazzo shortys....a friend of mine owns a shop so hopefully ill get the dealer price so i don't get raped....those things are damn expensive
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
TedG
Moderator
Posts: 8222
|
posted January 14, 2007 08:03 PM
I am probably going to have to ger a Brembo lever and graft it on to a stocker and have it powder coated. I doesn't look like Brembo makes a cable clutch lever.
____________
Ted
2000 Green ZX12 sold
The fast color!!
Green 2005 ZX10R
2009 Concours Black ABS
|
jredone
Novice Class
Posts: 75
|
posted January 15, 2007 01:05 AM
Yea... I looked around a bit for ya but i didn't find anything.....if i find some ill let you know
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
12r1
Expert Class
Posts: 390
|
posted January 15, 2007 04:24 PM
Edited By: TedG on 15 Jan 2007 18:33
http://cgi.ebay.com/ebaymotors/CRG-KAWASAKI-636-ZX10-ZX12-Brake-Clutch-BLACK-Levers_W0QQcmdZViewItemQQcategoryZ35587QQihZ018QQitemZ280068747605QQrdZ1QQsspagenameZWDVW
|
TedG
Moderator
Posts: 8222
|
posted January 15, 2007 06:34 PM
Edited By: TedG on 15 Jan 2007 18:52
12r1, Fixed your link.
|
jredone
Novice Class
Posts: 75
|
posted February 02, 2007 01:42 PM
i wound up getting STM racing levers.....awsome levers, they come apart so they could either be shortys or full size.....ill try to get some pics up
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
jredone
Novice Class
Posts: 75
|
posted February 02, 2007 01:45 PM
____________
If you feel in control...u just aint goin fast enough
JoE ReD
S.I.N.Y
|
jeepersracing
Expert Class
Posts: 107
|
posted February 04, 2007 07:22 AM
crg make a great adj lever
|
|
|
HOME
NEW TOPIC