D
Needs a job
Posts: 3365
|
posted June 16, 2004 06:30 PM
1/8
Would the 10 even get outtta first in the 1/8?
What would be a respectable (non-professional) time for the 1/8?
Just wondering.
  
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 16, 2004 06:57 PM
Respectable?? Probably 6.40s or better. I would suspect a gearing change would aid in better ets. It would suck to have to shift right before the line.
Pros and good riders... 6.0s
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
D
Needs a job
Posts: 3365
|
posted June 16, 2004 07:14 PM
Will it even get outta first?
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 16, 2004 07:36 PM
Top speed in 1st is 110, right? I would suspect you may have to shift right before the traps. You could try running through in 1 gear, but I doubt you could.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
D
Needs a job
Posts: 3365
|
posted June 16, 2004 07:43 PM
Thanks - was wonderin cuz I might try some 1/8 runs at a local event next month.
|
rubber pants
Zone Head
Posts: 798
|
posted June 16, 2004 07:48 PM
I would put a 1 tooth larger sprocket on the front and nail it (no shifting............ no waisted time) IMHO
____________
"Ya Gotta Have Big Ones!"
speeddemons.com
|
engineermike
Expert Class
Posts: 101
|
posted June 17, 2004 07:30 PM
Lowered, 1 down on the front sprocket, I ran 6.60 at 115 mph. That's 2nd gear no matter what.
The bike hits the rev limiter at 104, but redline is 99 mph.
Go 1 or 2 down on the front sprocket so you can use more of 2nd gear.
1 up on the front will make it extremely hard to launch due to the already-way-too-tall 1st.
Mike
____________
'04 Orange 10R
|
D
Needs a job
Posts: 3365
|
posted June 17, 2004 08:17 PM
Thanks.
|
10inMS
Parking Attendant
Posts: 16
|
posted June 22, 2004 08:14 AM
the 10 will go 120 before shifting out of first i can prove ive done it 1/8 mile times 6.30s no shifting stock gearing
|
engineermike
Expert Class
Posts: 101
|
posted June 22, 2004 11:20 AM
I'd like to be the first to raise the BS flag on that one.
Mike
____________
'04 Orange 10R
|
Michael Lee
Zone Head
Purchase Ivy
Posts: 729
|
posted June 22, 2004 12:33 PM
A hard one to swallow 10inMS, show me the money . . . .
|
salsa1
Needs a life
Posts: 5971
|
posted June 22, 2004 12:45 PM
 Edited By: salsa1 on 22 Jun 2004 13:47
Divide 102mph by 13k rpm and ya get theoretical miles per hour per 1000 rpm=7.84615. (first gear)
divide 120 by 7.84615 - that gives you rpm at 120 mph =15.29411k rpm
15,294 RPM in first gear!! Probably not.....rev limiter won't let ya .hehe
Have fun ;stay alive
|
Michael Lee
Zone Head
Purchase Ivy
Posts: 729
|
posted June 22, 2004 12:49 PM
Don't know how well ya ride but your hell on a calculator salsa . . 
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted June 22, 2004 02:40 PM
Maybe he has an upgrade ECU....lol
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
|
|
HOME
NEW TOPIC