posted May 20, 2004 03:56 PM
That would be an interesting part to R&D. Not for engineering the fit-up, but how effective they would be when actually put to use. Swft or XL - I assume you will tell us....
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted May 20, 2004 03:57 PM
What I like about them is that they use the front mount location like the other sliders I've seen, but stabilize the entire assy with the rear mount. Should provide a pretty rugged system!
posted May 20, 2004 05:01 PM
Edited By: kz2zx on 20 May 2004 18:10
swft, now that we've established what you are, we're only haggling over the price...
posted May 20, 2004 07:23 PM
I could have used these yesterday. I was on my way back from the bikeshop to see if they got the Vortex frame sliders in yet ( of course they didn't ). On the way home a van decided to pull out in front of me while I was turning into my neighborhood, so I had to lay her down. Cracked my tail, broke a peg, and scraped right upper and mid fairings, scratched my can pretty good and took off my right turn signal ( Euro flushmounts and full Akro Evo 2 haven't arrived yet thank God ). So today I was off to the bike shop again to order new plastic so my bike will be presentable again for Myrtle Beach next week. $500 later I have my new plastic on the way. FYI, pegs and tails are on back order. I was beyond pissed but I walked away with not a scratch on me, so I can't really be too upset. Of course the cager kept driving, however, he lives in my neighborhood and I will definitely be seeing him again SOON.
posted May 20, 2004 10:04 PM
The construction idea seems to be "borrowed" from Moko-GSG/Germany.
____________
A bad track day is better than a good day at work!!
Needs a life
Miles to go before I sleep....
Posts: 10623
posted May 20, 2004 11:03 PM
...nice!!!...I'm buyin'! ____________ “We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
posted May 21, 2004 04:30 AM
Best looking ones I've seen yet ( IMO), Did someone say swft was testing them?LOL
____________
Life's Been Good to Me!!!!!!!!!
posted May 21, 2004 06:21 AM
ronis,
Did Chevrolet "borrow" the location of the wheels from Ford? Sometimes there is only one "sensible" way to accomplish an engineering task. It's always in the details, man.
Doug
Needs a life
Miles to go before I sleep....
Posts: 10623
posted May 21, 2004 06:24 AM
...and did all the motorcycle mfgs follow Sochio's lead? ____________ “We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
Needs a life
Miles to go before I sleep....
Posts: 10623
posted May 21, 2004 06:26 AM
...or do ya' mean 'wait' concerns? ____________ “We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
posted May 21, 2004 06:38 AM
Somehting smells of excrement here, hmm, they look a lot like the ahh, MOKO frame protectors... AND the price nearly identicle, though the Moko's look better. June, huh?
Needs a life
Miles to go before I sleep....
Posts: 10623
posted May 21, 2004 06:50 AM
...I like the black anodized finish of the Muzzy's...I think the Muzzy's looks more substantial and appears better engineered...so much so that I just ordered a set from Dorn at Muzzy's ____________ “We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
posted May 21, 2004 07:54 AM
Edited By: Michael Lee on 21 May 2004 09:15
Dumb question but do ya need an impact wrench to break that frame bolt?
Any pics of other side?
Nevermind, Muzzy's website says they install in minutes - ordered a set online, been putting it off way too long.
posted May 21, 2004 04:51 PM
Edited By: champ91 on 21 May 2004 18:02
Unfortunatly the mount position here would be detrimental to me. At 6'6" I would be slammin my shins on these every time I backed up my bike when seated. And how do I know this. I make my own sliders and mounted mine on the engine mount bolt right above the location of the Muzzy slider. But it is from the looks about 4" higher up. Yet I still manage to bang the ole shin.
____________
NESBA #456 Intermediate
Always 1 step ahead of Lupi.
And 1 step behind Kimmy
All times are America/Va [ This thread is 2 pages long: 12Next» ]