Cowboy
Pro
Posts: 1061
|
posted May 17, 2003 09:05 PM
1st runs of the year!!
1ST runs of the year with the MTC multi lockup.
Lst year i had a best of 1.50 60'with the majority in the 1.56 range.
1st pass launched easy:1.57 60',4.09 330',9.46@147mph
2nd pass threw away clutch:1.49 60',3.95 330',9.29@148mph
3rd pass spun pretty bad:1.51 60' 3.99 330',9.32@148mph
This is all at STREET LEGAL event where traction is a problem.The clutch is set up with 3 stock springs and 3 lighter than stock springs that Chris told me to try.We oeiginally were going to run all the lighter springs but 1 was on back order and i'm glad!Going to take clutch apart tomorrow and see what things look like.
This clutch rocks!!
  
|
Cowboy
Pro
Posts: 1061
|
posted May 17, 2003 09:07 PM
I weighed the bike with me on it and i'm right on 700lbs
|
swft
Needs a life
Full throttle!
Posts: One MEEEEEELLION
|
posted May 18, 2003 06:27 AM
Hey, sounds great!
|
zrxdean
Needs a job
Posts: 2225
|
posted May 18, 2003 01:34 PM
Congrats Dave, I'm jealous. I thought you were lighter than that tho? Why so heavy??  Me and the ZRX are 665, and I'm 175 nekkid.
|
Cowboy
Pro
Posts: 1061
|
posted May 18, 2003 03:36 PM
I believe the fuel tank was almost full and i'm gaining weight.
|
AnotherRedHead
Expert Class
Posts: 348
|
posted May 18, 2003 03:49 PM
 Edited By: AnotherRedHead on 18 May 2003 16:49
Where did yuo get the lighter springs? How long is your arm?
|
Cowboy
Pro
Posts: 1061
|
posted May 18, 2003 05:44 PM
arm is a o-8 inch over set at about 6 inches back.Springs were sent to me to try and i have no idea what they are out of.I know MTC has some lighter than stock springs they sell for there lockup but you have to specifically ask for them.
|
01zx12r
Expert Class
Posts: 338
|
posted May 19, 2003 02:54 PM
Way to go Dave. Now just wait till we get the clutch dialed in  Hopefully I will have some good news this coming weekend also!! Chris
____________
Lovett Racing/Pedigo Performance
8.40 @170
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted May 19, 2003 03:50 PM
sounds cool man!! what motor is in there? running great!
Mad Mike
____________
200-MPH CLUB MEMBER!
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted May 19, 2003 06:03 PM
quote:
I weighed the bike with me on it and i'm right on 700lbs
damn, ur bike weighs 610lbs?!? u must have one of the slow green ones.
sounds like the clutch is doin ya good tho. good stuff.
|
Cowboy
Pro
Posts: 1061
|
posted May 19, 2003 06:57 PM
Mike stock motor with mtc turbo/nitrous pistons and a killer map.The pistons look exactly the same as stock but they are forged instead of cast.The cast pistons i beat on last year still look new but we want to spray a bit more this year.
Freek,i know the dyno shows a 15hp drop between the nitrous map and the n/a map but i'm still not convinced.Are you availlable Friday morning and we'll switch the nitrous map to switch #1 and the nos map to switch 3 just to be safe?I know the #1 position is working for sure and i want to spray Friday night.
|
BA
Pro
Posts: 1592
|
posted May 19, 2003 07:04 PM
Cowboy, how much do you weigh and what pipe are you using?
With your 330's it sure looks like you're getting moving really well in 1st gear, but I was a little surprised that I didn't see a 149 or 150 in your mph.
Just curious.
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted May 19, 2003 08:02 PM
cowboy, i'll see what i can do re fri morn. i'm prolly goin to bremerton wed or (more likely) thurs to pick up the tailpiece so my time may be a bit tight. have u gone down to the shop yet? if not, maybe u wanna do it that day too?
|
Cowboy
Pro
Posts: 1061
|
posted May 19, 2003 09:24 PM
Freek are you riding the bike down?could you take my motor down to SWFT for me if your driving down?E-mail me
BA,I'M 155 +gear now and i run my chain a bit too tight i think and it robs a bit of mph.I believe my 1/8 mph was right a 120 all three runs.
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted May 19, 2003 10:15 PM
naw, i have to ride down. aint got no car no more. otherwise i definitely would.
|
ZXALAN
Expert Class
Posts: 156
|
posted May 20, 2003 12:13 PM
Nice 60's!! What did it do on spray?
If I could pull a low .50 or a .49, I think I would be high 9.20s on motor also. My best ever is a 1.54 and only once. Rest are usually 1.56-1.58s. This is stock swingarm and D207 though.
|
kcadby
Pro
Posts: 1733
|
posted May 20, 2003 02:15 PM
You weighed the same (exactly 700) as I did on John's with about 1/2-tank of gas...
We are getting ready to put the MTC lock-up in John's bike 
|
Cowboy
Pro
Posts: 1061
|
posted June 02, 2003 08:32 AM
This weekend was great!Ran a 8.89@164 mph and a 8,95@167mph with a .020 pill in first stage and a .034 in the second stage.Screwed up royally in the finals with a .380 light,my worst 60' of the weekend and my worst et.
|
wannabe
Pro
Posts: 1931
|
posted June 02, 2003 12:21 PM
I am so not worthy to even read your posts. You da man!
Sorry about the red light in the finals. That's gotta suck the big one. 
|
Bossman69
Novice Class
Posts: 58
|
posted June 02, 2003 06:41 PM
You are rolling and at 167 mph, what are your gears 17/49? Total weight of 700 is with in 5 of me What are you shifting at 11,200?
____________
8.99 @ 162 02 zx12 Gotta Love NOS
|
Cowboy
Pro
Posts: 1061
|
posted June 02, 2003 09:28 PM
gears are 17/51 and shift light comes on at 10,000 but by the time i shift its about 11000.That 167mph pass i beleive i was just about to hit the limiter in 6th
|
ZHooligan
Moderator
Post Whore Extraordinaire!
Posts: 3829
|
posted June 02, 2003 09:46 PM
Your way to fast for me! Cripes!! First time out, now where do you go from here!!!
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted June 02, 2003 09:46 PM
damn, a full 6/100th faster than last year's best? nice!
|
Cowboy
Pro
Posts: 1061
|
posted June 03, 2003 08:42 AM
quote:
Your way to fast for me! Cripes!! First time out, now where do you go from here!!!
We'll i still have to get the high pressure fuel pump installed,larger nos jet in 2nd stage and get it down to you guys to dynotune.
|
Bossman69
Novice Class
Posts: 58
|
posted June 03, 2003 08:50 AM
So what pistons are you running and is the air shifter working now that you have the trans under cut? I wanted to get anotherredheads NOS pistons but I dont want stock bore pistons
____________
8.99 @ 162 02 zx12 Gotta Love NOS
|
|
|
HOME
NEW TOPIC