Shane661
Needs a life
Posts: 11494
|
posted March 22, 2011 11:51 AM
- Muzzy Pump = Walbro PN ??? -
Which Walbro does Muzzy sell as a replacement for the "A" model??
Shane
  
|
almost_les
Zone Head
Posts: 590
|
posted March 22, 2011 12:46 PM
gss242 is the one that jim has in his bike. from what i understand muzzy uses a total overkill pump.
|
almost_les
Zone Head
Posts: 590
|
posted March 22, 2011 12:48 PM
start from the bottom:
http://www.bikeland.org/board/viewthread.php?FID=1&TID=20929&pagenumber=4
|
tshultz
Zone Head
Posts: 556
|
posted March 22, 2011 01:14 PM
I used the walbro gss242 http://www.latemodelrestoration.com/item/LRS-9350B/1986-97-Mustang-190-Lph-Walbro-Gss242-Fuel-Pump
|
Shane661
Needs a life
Posts: 11494
|
posted March 22, 2011 01:18 PM
What about the 307??
|
tshultz
Zone Head
Posts: 556
|
posted March 22, 2011 01:23 PM
http://www.autoperformanceengineering.com/html/numbers.html
this site has info on the different pumps.
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted March 22, 2011 05:01 PM
The gss 307 is a 255 lph pump. Way overkill for a 250 hp engine.
____________
Y2KZX12R
CompetitionCNC.com
|
2000redrocket
Pro
Posts: 1662
|
posted March 22, 2011 06:14 PM
thanks jim.
|
entropy
Moderator
Posts: 8671
|
posted March 23, 2011 02:55 AM
quote:
Which Walbro does Muzzy sell as a replacement for the "A" model??
Shane
Shane, IIRC, you have a couple of those Muzzy pumps in the mountain of stuff that came with the bike.
Have you inventoried all yr doo-dads yet??
____________
This moderator uses moderation in moderation
|
Shane661
Needs a life
Posts: 11494
|
posted March 23, 2011 05:37 AM
 Edited By: Shane661 on 23 Mar 2011 13:41
Nope, haven't yet...I bet there is probably a y2k pump base in there too, right? I just bought one. 
I keep forgetting that I have about 500 lbs of "A" model parts on hand now. ARRRGH!
That's good news on the pump! I haven't been able to go throught the boxes yet. I'm putting in 72 hours at work this week...probably next week I will have time. 
|
entropy
Moderator
Posts: 8671
|
posted March 24, 2011 01:16 AM
very likely there is a base in there also; i did some experimenting with filters & such.
i went looking for my spare(s) digikill-3 yesterday, couldn't find any Muzzy shifter stuff.
I prob sent all that to you also.
____________
This moderator uses moderation in moderation
|
Shane661
Needs a life
Posts: 11494
|
posted March 24, 2011 03:47 AM
Email sent...
|
Shane661
Needs a life
Posts: 11494
|
posted March 24, 2011 03:56 AM
So, the Muzzy is actually the 307??
|
tshultz
Zone Head
Posts: 556
|
posted March 24, 2011 06:42 AM
quote:
So, the Muzzy is actually the 307??
I believe so.. i could be wrong
|
ZRXDean
Needs a job
Posts: 2225
|
posted March 24, 2011 08:27 AM
I have 255lph GSS342 pumps in both ZX10s now. It fits into the stock location, with a little tweaking. Sure it's overkill, but for $75... eh.
|
Shane661
Needs a life
Posts: 11494
|
posted March 24, 2011 10:24 AM
Well, if there is a spare Muzzy pump in those boxes Karl sent me (literally 400 lbs of parts sent via UPS!), you can bet I'm going to use it! 
|
|
|
HOME
NEW TOPIC