shiphteey
Needs a job
Posts: 2529
|
posted September 25, 2010 09:36 AM
Maxton September 2010 Results....
Heard Wrongway went 201 naked and got the bike in the 2 club. Congrats man.
Anyone else heard results yet?
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
  
|
smokinZX14
Needs a life
Posts: 10197
|
posted September 25, 2010 11:06 AM
Wrongway ( Roy ) Just called me from Maxton and his 1530 zx14 ran 202 ... Remember Roys bike runs in the naked class .. 202 with no body work !!
He said Sal ( ACE ) just went 201 on one of his 2X2 motors that we read about here on Bikeland .. ..
Nice job Roy
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
wrongway
Pro
Posts: 1078
|
posted September 25, 2010 11:26 AM
quote:
Wrongway ( Roy ) Just called me from Maxton and his 1530 zx14 ran 202 ... Remember Roys bike runs in the naked class .. 202 with no body work !!
He said Sal ( ACE ) just went 201 on one of his 2X2 motors that we read about here on Bikeland .. ..
Nice job Roy
Sal wasnt there ,,, but one of the bike he built was ... it went 197 before I left .
Roy
|
smokinZX14
Needs a life
Posts: 10197
|
posted September 25, 2010 11:29 AM
 Edited By: smokinZX14 on 25 Sep 2010 19:30
quote:
quote:
Wrongway ( Roy ) Just called me from Maxton and his 1530 zx14 ran 202 ... Remember Roys bike runs in the naked class .. 202 with no body work !!
He said Sal ( ACE ) just went 201 on one of his 2X2 motors that we read about here on Bikeland .. ..
Nice job Roy
Sal wasnt there ,,, but one of the bike he built was ... it went 197 before I left .
Roy
Sorry , One of Sals builds then ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Shane661
Needs a life
Posts: 11494
|
posted September 25, 2010 12:13 PM
Congrats Roy! 
|
THE ICE MAN
Expert Class
Posts: 195
|
posted September 25, 2010 12:32 PM
Edited By: THE ICE MAN on 25 Sep 2010 20:56
The Zx14 2X2 motor went 202.5611 MPH with owner on it he said he is not tucking properly and still tuning it in as I have sent him 5 different fuel maps to his email for him to try and give me feedback and go faster.
Now thats customer support !
((Temperature for today was 91*)) THIS IS ON PUMP GAS !!!
Last time at the races he went in the morning 191 MPH and as the day progressed kept going slower due to winds picking up and was going 188 mph then asked me to take it for a pass without riding the bike for months just getting off dales bike I jumped on Customers bike on my 1 and only pass I went 196 MPH right after he made the 188 MPH passes
So I would have NO problem running this bike 210 MPH plus.
Bike is full weight not slammed 44 MM TB's
He is doing a very very good job and I am proud of him I can not ask for more 
Sal.
____________
ACE PERFORMANCE.COM
40 Records@ Maxton, Fastest NA
1507cc Busa 223.330 MPH also
Fastest ZX12 N.A.212.846 MPH in
the mile Fastest 1000 750 @ Maxton
& Fastest 600 N.A. in the world.
|
THE ICE MAN
Expert Class
Posts: 195
|
posted September 25, 2010 12:44 PM
Hey Roy congratulations welcome to the 200 mph club !
Sal.
____________
ACE PERFORMANCE.COM
40 Records@ Maxton, Fastest NA
1507cc Busa 223.330 MPH also
Fastest ZX12 N.A.212.846 MPH in
the mile Fastest 1000 750 @ Maxton
& Fastest 600 N.A. in the world.
|
wrongway
Pro
Posts: 1078
|
posted September 25, 2010 12:57 PM
thanks Sal ...
I think I can reture now :-)
or go back to building car motors...
Roy
|
smokinZX14
Needs a life
Posts: 10197
|
posted September 25, 2010 12:58 PM
quote:
The Zx14 2X2 motor went 202.5611 MPH with owner on it he said he is not tucking properly and still tuning it in as I have sent him 5 different fuel maps to his email for him to try and give me feedback and go faster.
Now thats customer support !
((Temperature for today was 91*))
Last time at the races he went in the morning 191 MPH and as the day progressed kept going slower due to winds picking up and was going 188 mph then asked me to take it for a pass without riding the bike for months just getting off dales bike I jumped on Customers bike on my 1 and only pass I went 196 MPH right after he made the 188 MPH passes
So I would have NO problem running this bike 210 MPH plus.
Bike is full weight not slammed 44 MM TB's
He is doing a very very good job and I am proud of him I can not ask for more
Sal.
202.5611 nice going .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
shiphteey
Needs a job
Posts: 2529
|
posted September 25, 2010 03:10 PM
Eric (Dark Horse Racing) went 121 twice on the Ninja 250....going for more tomorrow.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
madkawboy
Expert Class
Posts: 398
|
posted September 26, 2010 10:54 AM
Edited By: madkawboy on 26 Sep 2010 18:54
quote:
Eric (Dark Horse Racing) went 121 twice on the Ninja 250....going for more tomorrow.
A.
WOW ! What is done to it now ?
-- Zack
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
shiphteey
Needs a job
Posts: 2529
|
posted September 26, 2010 11:58 AM
Sprayed it. I believe 121.x was his best speed of the meet. Might have hurt the motor but may be back to Maxton as early as October 2010.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
ZRXDean
Needs a job
Posts: 2225
|
posted September 26, 2010 04:43 PM
Congrats Roy, WTG, sorry I missed the hat ceremony. You're racking up the hats these days
Eddie Powell also got in the ECTA 2-club with a turbo Busa SIDECAR - no small task. Big balls.
Eric toasted plugs (at least) but was still happy with 121. Jarl Walthe (sp) also sprayed for the first time, and went 125 on his single cylinder altered 250.
Todd Dross secured the 2010 ECTA points championship for SGR with a 169 pass on the NA Busa sidecar. WTFG.
Josh Owen went 212 on Debbie Dross' stock motor nitrous bike, faster than the bike has ever been at Maxton.
Debbie ran 117 on a new Triumph standard (1200?) faster than the bike has ever been.
Don Haas went 235 on his beautiful GSXR1000, the fastest 1000 on the mile, anywhere, huge congrats.
We struggled a little with chassis issues with the naked Guthrie H2 Busa, but made a lot of passes between 225 and 235, with a best of 239. I had a great time, looking forward to trying again with a few changes and cooler weather next month.
Dean
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted September 27, 2010 02:51 AM
Thanks for the update Dean.
____________
Y2KZX12R
CompetitionCNC.com
|
brendasue555
Expert Class
Posts: 436
|
posted September 27, 2010 12:42 PM
Way to go everyone, congrats on all the great speeds!
____________
Brenda
|
narider
Expert Class
Posts: 246
|
posted September 27, 2010 08:05 PM
Dean, you rocked... as did so many others.
But in the end, you left the track with the top speed of the meet on a naked bike you've only ever ridden at one other meet, and never at this track.
What an honor for the Twin Jugs Racing Crew and a benefit for Scott Guthrie Racing to see you at work and leave with 7 records out of 12 runs! We'll see if you can race it instead of just test it on you next outing. :-)
Don Hass's 235 run was absolutley beautiful, as was his bike and girlfriend to say the least! What a great guy Don is and has been over the years.
Eddie Powell on his turbo sidcar was awesome to say the least... the first 200mph sidecar on pavement if I'm not mistaken, certainly the first one at Maxton.
Roy's "hat run" on a bike that he's put countless hours of his thoughts and work (no matter what the appearance shows) in deep enough to brush off the ridicule and even slander at times from many of his frineds and competitors while never really diverting from his own (sometimes off the wall) thoughts... another testament to something many of us will never understand exactly what.. possibly Kawasaki's ability to make something live no matter what you do to it? Just kidding Roy, awesome perseverance with results you can stand proud of..... welcome to the club for sure, was real cool to have your kid there for the occasion too!
Ransom Holbrook... who went from running 196 on his lightly built Production Hayabusa one meet to adding a pipe and n2o and a better motor tune... resulting in running 215mph on spray and 205mph on motor taking both class winnings from Throttle Nation (as well as a cheeseburger bet that Deb lost to him - lol).
Phil Cambell upped his and his Dave owen built and tuned turbo Hayabusa best speeds to 226mph.. he still hasn't touched the plugs, tune or possibly even the air on the tires since Dave last layed hands on it... what a testament and honor to witness such trust and dedication to a friendship.
And Josh, well he's ridng Deb's bike hard enough that we may just have to pull that valve cover after all it if he keeps up this maxing it out everytime he rides. Lots of runs, miles and spray through that motor over the last 2-1/2+ years.
Todd
|
entropy
Moderator
Posts: 8671
|
posted September 28, 2010 02:00 AM
very cool race recap from Dean & Todd.
I LOVE reading this stuff
Thanks, guys!!!!
____________
This moderator uses moderation in moderation
|
DahMurf
Expert Class
2006 Hayabusa - Black
Posts: 132
|
posted September 28, 2010 03:49 AM
Quick update, I found out when I got the run logs after the meet that I actually ran 119 on shutdown volunteer worker Ken Presson's 865cc Triumph Bonneville cruiser. (They announced it as 109!) Fun bike to ride! I'll have to try for 120 next time!
Great job to Roy, Eddie, Don, Dean, Todd, Josh, Ransom...!
We had a great time as always!
____________
Miss you my friend - #1302 Twin Jugs Racing
ECTA 200 MPH club@202 / Texas 200 MPH club@209 / Loring 200 MPH club@218
|
narider
Expert Class
Posts: 246
|
posted September 28, 2010 04:26 AM
Oh yes, and my sweetheart how could i forget....
That Triumph was suposed to go 115mph if everything went perfect and the wind was behind you, the 119 run (announced by someone other then Joe) sounded way faster then the 109 it was portrayed as, especially siince you did as planned that tun and rang it's neck like a turkey in november... awesome job getting those runs in and still keeping everyone elses paperwork and safety in order. Not to mention all the inspecting you and Josh both did this meet... Over 10 years of essentially the same thing now and yet it still gets better every meet we are there together, Josh has sure added a great value to our team in many ways, and racing with people like Wayne, Shane and Dean and the speeds they obtain sure have kept us on our toes. As Karl said... I LOVE reading this stuff too, especilly the care and comeraderie of each other's successes and downfalls no matter what the speeds or goals are.
Great job darlin, you have proved ot be a racer of racers by your willingness to run any bike that's deemed safe no matter it's potential, and at the same time willing to give up riding meet after meet for many years to help your fellow racer's achieve their goals.... that's a real TEAM PLAYER!
Todd
|
shiphteey
Needs a job
Posts: 2529
|
posted September 28, 2010 11:18 AM
Good job fellas. Todd, did Josh go 212 on Deb's bike with or without bodywork....I'm thinking with bodywork but Deb's bike has been naked for a while now so just wondering...
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
DahMurf
Expert Class
2006 Hayabusa - Black
Posts: 132
|
posted September 28, 2010 05:48 PM
quote:
Good job fellas. Todd, did Josh go 212 on Deb's bike with or without bodywork....I'm thinking with bodywork but Deb's bike has been naked for a while now so just wondering...
A.
Ali,
Josh was running APS this event. Josh's 212.9 is now my bike's fastest speed in the mile and he also ran it's fastest speed in Loring at 228. If he keeps this up I might have to open that engine after all! He's done real well with minimal HP. Makes me wonder where we'd get with some actual motor work! 
Missed seeing you, maybe next time?
Debbie
____________
Miss you my friend - #1302 Twin Jugs Racing
ECTA 200 MPH club@202 / Texas 200 MPH club@209 / Loring 200 MPH club@218
|
shiphteey
Needs a job
Posts: 2529
|
posted September 28, 2010 06:17 PM
Took off work already for the October meet so I should be at Maxton if all goes well. 212.9 is definately moving, Josh ain't tiny. I was hoping for something between 210-215 with bodywork, hopefully I'll get a chance to run it in the standing mile....if not Maxton then I'll have to wait for Miami in the winter. One day at a time and if I'm not bringing help then probably one bike at a time too.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
THE ICE MAN
Expert Class
Posts: 195
|
posted September 28, 2010 06:38 PM
Hey now thats my record you are after dont make me take my bike back up there
and put NOS on it this time ! LOL
Sal.
____________
ACE PERFORMANCE.COM
40 Records@ Maxton, Fastest NA
1507cc Busa 223.330 MPH also
Fastest ZX12 N.A.212.846 MPH in
the mile Fastest 1000 750 @ Maxton
& Fastest 600 N.A. in the world.
|
|
|
HOME
NEW TOPIC