oldkawboy
Needs a job
Posts: 2125
|
posted June 05, 2008 07:06 PM
Hey tshultz,
Me and the boys have been going for 6 or 7 years now and havng a blast everytime. Great event for father and sons!
If I can help in any way just let me know.
Dan
  
|
VincentHill
Needs a life
Posts: 6520
|
posted June 06, 2008 10:27 AM
quote:
Hey tshultz,
Me and the boys have been going for 6 or 7 years now and havng a blast everytime. Great event for father and sons!
If I can help in any way just let me know.
Dan
Even Randall and I made it a few times! Maybe trying to Fly at close toe 200 MPH After the FInish line may have a little something to do with it?
Dr. Gary, I plan to see if they need some volunteers and maybe they will get me a Soda or soemthing  ! So PUT YOUR Wallet in your pocket and let someone do something for you for a change!
____________
Made History @ Daytona and still one fast old man!!
|
zrxdean
Needs a job
Posts: 2225
|
posted June 06, 2008 10:49 AM
Hey Vincent, what's up with your nitrous ZX12?
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted June 06, 2008 02:20 PM
Sounds good Mr. Hill.
I think Mr. Hill is gearing his bike up for this fall.
Entropy, Osti, how go the motors? Will they be in the frame this weekend?
I have decided to take Entropy's advice and leave well enough alone on my bike and run it as is...............so next weekend a trip to JohnnyCheese's to make sure everything is still working well. I think he is having a VTX Dyno ShootOut so I might have to sneak inbetween some bike runs.
____________
TFA 200MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted June 06, 2008 05:28 PM
quote:
Sounds good Mr. Hill.
I think Mr. Hill is gearing his bike up for this fall.
Entropy, Osti, how go the motors? Will they be in the frame this weekend?
I have decided to take Entropy's advice and leave well enough alone on my bike and run it as is...............so next weekend a trip to JohnnyCheese's to make sure everything is still working well. I think he is having a VTX Dyno ShootOut so I might have to sneak inbetween some bike runs.
LOL!! Not even close for me. Just waiting on a couple things. I'm shooting to have the motor in the frame and running next weekend. *fingers crossed*
|
tshultz
Zone Head
Posts: 556
|
posted June 06, 2008 05:48 PM
quote:
Hey tshultz,
Me and the boys have been going for 6 or 7 years now and havng a blast everytime. Great event for father and sons!
If I can help in any way just let me know.
Dan
Thanks I just need to do a few things to the bike. Change sprockets and buy a new rear
tire. looking forward to meeting you guys.
|
entropy
Moderator
Posts: 8671
|
posted June 07, 2008 01:40 AM
quote:
quote:
Sounds good Mr. Hill.
I think Mr. Hill is gearing his bike up for this fall.
Entropy, Osti, how go the motors? Will they be in the frame this weekend?
I have decided to take Entropy's advice and leave well enough alone on my bike and run it as is...............so next weekend a trip to JohnnyCheese's to make sure everything is still working well. I think he is having a VTX Dyno ShootOut so I might have to sneak inbetween some bike runs.
LOL!! Not even close for me. Just waiting on a couple things. I'm shooting to have the motor in the frame and running next weekend. *fingers crossed*
I have been diverted from the motor, but will prolly get back on track this weekend.
I'm doing some rearranging in the garage to accommodate wifey's new Accord and garage floor treatment.
____________
This moderator uses moderation in moderation
|
VincentHill
Needs a life
Posts: 6520
|
posted June 07, 2008 04:48 AM
Dr. Gary is correct! I have everything I need to put the bike back together except TIME and Energy. 1st had to deal with Peggy's car, then My Car and then the Van My car is almost finished and Peggy's Car is also almost finished and not a lot more for the van.
Problem was, Pierre's Drag Bike! How can I refuse to help a friend by going to the first 3 Races to watch his bike 
The real plan is to have it together and reading for testing by the end of August and take it to Ohio for more testing (If I can afford the Gasoline) and Maybe race it at the end of September or at least by October
____________
Made History @ Daytona and still one fast old man!!
|
zrxdean
Needs a job
Posts: 2225
|
posted June 07, 2008 07:10 AM
Good luck with the rebuild Vincent, hope to see it at a meet this year.
Bear's PST ZX14 is gorgeous, Barry did a great job.
It's 97 degrees here in Gainesville today, not the best for garage work. Finally got some software for the Kawasaki kit ECU - very cool stuff. Kit ECU, software = $210, harness adapter = $50, programming cable = $500!!!! Still worth it though. Fuel / ignition mapping, ignition kill by gear, 13,3 rev limit, real-time engine monitoring, purty cool.
|
osti33
Needs a job
Posts: 2973
|
posted June 08, 2008 01:29 PM
quote:
Good luck with the rebuild Vincent, hope to see it at a meet this year.
Bear's PST ZX14 is gorgeous, Barry did a great job.
It's 97 degrees here in Gainesville today, not the best for garage work. Finally got some software for the Kawasaki kit ECU - very cool stuff. Kit ECU, software = $210, harness adapter = $50, programming cable = $500!!!! Still worth it though. Fuel / ignition mapping, ignition kill by gear, 13,3 rev limit, real-time engine monitoring, purty cool.
Cool stuff Dean. I can wait to see you go down the track on that 10!!
|
VincentHill
Needs a life
Posts: 6520
|
posted June 08, 2008 07:28 PM
I was in the Back Yard today putting a Muffler on the BMW and new Belt and Hydraulic Tensioner The Car showed 111 degrees under my Car Port with the fan on and when we started the MINI the Fan turned on to begin with! Now that is HOT! Too Old for this!
____________
Made History @ Daytona and still one fast old man!!
|
osti33
Needs a job
Posts: 2973
|
posted June 14, 2008 07:00 PM
Everyone getting their stuff together?? Got my motor back in the frame this morning. 
|
entropy
Moderator
Posts: 8671
|
posted June 14, 2008 09:15 PM
yep, ready except for a lil safety wiring & stuff.
____________
This moderator uses moderation in moderation
|
madkawboy
Expert Class
Posts: 398
|
posted June 15, 2008 02:30 PM
regearing and lowering mine today
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
zrxdean
Needs a job
Posts: 2225
|
posted June 16, 2008 06:25 AM
I need to finish wiring/plumbing the air shifter and boost controller, then get it tuned at MPS with Kevin & Dan. Shooting for next week.
|
entropy
Moderator
Posts: 8671
|
posted June 16, 2008 06:44 AM
I will have to re-gear, cause the dyno showed peak power now at 10-10.5K (rather than 11-11.5).
Thanks to VH tip, Sprocket Spec will have 19t at my garage tomorrow.
This is the story that never ends.
Oh yeah, gotta re-set up my DL-32, because "my" laptop got reconfigured, lost all non Compary apps & settings.
Lucky for me the IT guy has a stretched Busa and was sympathetic to my remote user needs
____________
This moderator uses moderation in moderation
|
shane661
Needs a life
Posts: 11494
|
posted June 19, 2008 05:53 AM
So, who all is coming out? Looks like a good showing of board members! I am 210 lbs. as of this morning. Am I suitable for TFA?
Should have the 14 there to add to the Kawasaki showing...
And VH, you should come and run the ZRX down the mile! We'll be happy to transport your gear, if need be!
Shane
|
entropy
Moderator
Posts: 8671
|
posted June 19, 2008 07:11 AM
Gary & I and #2 Son are coming from Texas.
VERY much looking fwd to it.
____________
This moderator uses moderation in moderation
|
VincentHill
Needs a life
Posts: 6520
|
posted June 19, 2008 07:23 AM
quote:
So, who all is coming out? Looks like a good showing of board members! I am 210 lbs. as of this morning. Am I suitable for TFA?
Should have the 14 there to add to the Kawasaki showing...
And VH, you should come and run the ZRX down the mile! We'll be happy to transport your gear, if need be!
Shane
Not Tech Ready! My Schedule is Waay too tight for an Old Man! and my Rag is not helping me! (1982 BMW 320I) I changed the Cam gear, Cam Chain, Oil Pump Chain, Water Pump (I had for 9 years riding in the trunk), adjusted the Valves, New Muffler and tail pipe, New Front Exhaust pipe and Converter, Fixed the DeFroster and Vents.
Just finished LAST Night becauce tonight I drive to Bristol Tennessee to watch the Drag Races with the Bear Racing Entry so that if anything is needed, maybe I can help.
I also changed the gearing on the ZRX 18 fromt (Comes with a 17 and had 16 at MIR)
I am JUST Plain out of Time and Energy! Understand that In October I will be 65 and other than Buddy (As far as I am concerned he is still here!) I am about the oldest person around!!
Thank for the Offer (Plus I would have to change to "Track Gasoline" and need containers to drain and replace the Fuel (Cannot throw a gallon of Gasoline nowadays!
____________
Made History @ Daytona and still one fast old man!!
|
osti33
Needs a job
Posts: 2973
|
posted June 19, 2008 08:33 PM
quote:
So, who all is coming out? Looks like a good showing of board members! I am 210 lbs. as of this morning. Am I suitable for TFA?
Should have the 14 there to add to the Kawasaki showing...
And VH, you should come and run the ZRX down the mile! We'll be happy to transport your gear, if need be!
Shane
I'll be coming down from the Chicago area. I'll be racing my *cough* busa *cough*...
I'll be rolling in Thursday night.
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted June 20, 2008 10:00 AM
Dang Mr. Hill you are very, very busy! I have just figured out that as you get older you get much more Busy (Busy'er). Hope all is well with the Busa Ryan! Can't wait to hear that monster run! I will just be running my 12 in it's regular street/Texas Mile form. Dyno'd it last weekend and everything seems fine for Maxton. I have slimmed down a little to run at Maxton, I was running around 255-260lbs a few months back and am now around 245ish. Would have been in the upper 230's but an old knee injury flared up...............................I am getting OLD!
PS: Mr. Hill have fun with JC in DC, don't eat too many crabbies.
____________
TFA 200MPH CLUB MEMBER!
|
DahMurf
Expert Class
2006 Hayabusa - Black
Posts: 132
|
posted June 21, 2008 11:50 AM
 Edited By: DahMurf on 21 Jun 2008 12:51
Ryan I'll be the outcast with you. Actually I'm going for extreme outcast status with this group! Busa rider, girly, and the only part of me that qualifies for TFA is my A!!! (Although I bet I could about keep up in the eating dept with most of ya!! ) We should be at the Pine Acres earlier then normal on Thursday evening. Hopefully grab a little R&R and pool time to boot! So if any of you are in Thursday look for us! We should stand out in the crowd! The bald one, the scarred one & the blonde teenybopper who will be pretending not to know any of us!
Deb
____________
Miss you my friend - #1302 Twin Jugs Racing
ECTA 200 MPH club@202 / Texas 200 MPH club@209 / Loring 200 MPH club@218
|
entropy
Moderator
Posts: 8671
|
posted June 22, 2008 11:12 AM
my bike is "done".
The next time i fire it up will be at Maxton!!!
Deb,
is Pine Acres in Laurinburg? I forget where Ryan made reservations but its in Laurinburg. Gary , Daniel, and I will roll in Thurs afternoon depending on how many times we stop to eat.
____________
This moderator uses moderation in moderation
|
THE ICE MAN
Expert Class
Posts: 195
|
posted June 22, 2008 11:54 AM
See everyone at Maxton
____________
ACE PERFORMANCE.COM
40 Records@ Maxton, Fastest NA
1507cc Busa 223.330 MPH also
Fastest ZX12 N.A.212.846 MPH in
the mile Fastest 1000 750 @ Maxton
& Fastest 600 N.A. in the world.
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted June 22, 2008 12:15 PM
quote:
my bike is "done".
like the " " Karl. we all know its never going to be done. whats next? TI valves and rods?
good luck to everyone, go fast and only break records not bikes!
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
|
|
HOME
NEW TOPIC