TRNorBRN6001
Needs a job
Posts: 2021
|
posted March 21, 2006 06:52 AM
Them Mr. Turbo ones are nice and a good price, but still labor intensive.
Yeah, them turbo 60"ers will sure take the heart out of ya. They realy need a
Nos and N/A class.
Guess it'll be bracket stuff, or a Popyees chicken diet to get ya up to the HH class.
____________
TFA 200MPH CLUB MEMBER!
  
|
bossman12r
Zone Head
Posts: 513
|
posted March 21, 2006 06:55 AM
What happened to the HH class? I dont remember them having a per 8 bike sign up to have a class. I thought it was just the 60" class, HH class does not even have a pay out.
____________
gen 4 zx10 is fast
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted March 21, 2006 07:07 AM
yeah, we need an all motor class here at our local track. One or two turbos and a nitrous bike scare everyone away. If it was a all motor heads up class, there would be twenty or 30
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted March 21, 2006 09:29 AM
Yeah, not enough fat boys to make a HH class. If they had 12-15 fatties then
they might consider pay out. There is a little side pay out though, especially
them Lousianna folk. They like a good foot race too! It was actually kind of tame
there for the opener.
I might consider the HH class if it pulls through, I should have my bike done by then.
____________
TFA 200MPH CLUB MEMBER!
|
bossman12r
Zone Head
Posts: 513
|
posted March 21, 2006 09:32 AM
What is the cost of the rebuild on your bike? i was thinking mine would be around 4500 if I went with good rods.
____________
gen 4 zx10 is fast
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted March 21, 2006 11:56 AM
It'll be pushing close to 7k, about 5k more than I wanted to spend, but you know how that goes. I only started with a stock engine so the build tends to be a little higher priced for the good stuff.
What all do ya have to fix? If I remember correctly your timing chain went and took out the valves and pistons. How does your head and cylinder block look?
Mr. Turbo has a nice base ZX-12 set up for the price and if you need stock pistons, rods, or crank I have them, But it'll still be hard to keep up with those big gun Turbo Busas.
____________
TFA 200MPH CLUB MEMBER!
|
bossman12r
Zone Head
Posts: 513
|
posted March 21, 2006 01:21 PM
I was wroung on the timing chain, it was the #4 rod and it took out the intake cam, 2 intake valves, the cam tray, the SBM 1320 block but it can be fixed, the rod journal and I have not removed the pan to look at the trans.
____________
gen 4 zx10 is fast
|
young guy
Parking Attendant
Posts: 11
|
posted March 21, 2006 05:02 PM
254 hp at low boost and stock motor and thats before we stretch it
what do we have 2 do to get 400hp?
|
bossman12r
Zone Head
Posts: 513
|
posted March 22, 2006 08:18 AM
Should be just lower compression forged piston and maybe a water injection kit.
____________
gen 4 zx10 is fast
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted March 22, 2006 10:35 AM
itll make more on the stock motor 
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted March 22, 2006 12:20 PM
What are ya running about 8psi of boost?
____________
TFA 200MPH CLUB MEMBER!
|
young guy
Parking Attendant
Posts: 11
|
posted March 22, 2006 01:54 PM
running 15psi from start 2 finish with no boost control
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted March 22, 2006 02:37 PM
15psi is low boost, dang can not wait till ya crank it up.
Just curious is the 15psi your reading off the boost gauge or just the spring
weight. What kind of C/R are ya at if you do not mind giving a few secrets away.
If ya get a chance post us a pic. Thanks
____________
TFA 200MPH CLUB MEMBER!
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted March 22, 2006 02:55 PM
must be a bigoll spacer plate....should be making a good bit more power with 15psi.
|
young guy
Parking Attendant
Posts: 11
|
posted March 22, 2006 10:00 PM
15psi is racing boost
low boost is for the dyno
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted March 23, 2006 06:44 AM
uhhhh....
|
|
|
HOME
NEW TOPIC