TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 08, 2005 10:06 PM
Cut oil pans.... ok its back again
Anybody make one yet???
Talked to a few guys that fabbed Busa ones.... they need a loaner motor to mock one up.
Surely someone has one here.
MadMike?
Ra12?
Canadamaxxer?
Ricky G?
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
  
|
canadamaxxer
Pro
Posts: 1090
|
posted January 08, 2005 10:31 PM
I can build one for you out of sheet aluminium (probably between 1/8 and 3/16" or so)...what you do specifically want? Do you want the entire hump gone or just enough to lower a couple more inches? You will have to have the pickup cut and welded appropriately...which I can also do. I just happen to have a couple of 12's and a TIG welder handy...just tell me what you want.
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted January 08, 2005 11:10 PM
I have one about 90% done just need to do the testing of the oil pressure. and then it will be up and running.
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 08, 2005 11:20 PM
Well.... guess Im looking to get about 2-3" off the bottom of the pan and relocate the drainplug?
Im still running a standard header, but eventually want to go with a sidewinder.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 08, 2005 11:22 PM
Got any pics canada?
Any chance of a billet one? I need to see bling when Im on my side changing the oil....lol. 
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted January 09, 2005 02:22 AM
Tracy did mine...although itll no longer fit a stock exhaust.
____________
Do not taunt happy fun ball!
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 09, 2005 06:35 AM
Guys, I've been hearing alot about the cut down oil pans causing motors going bad due to the motor being oil starved...
I hear its very very important on how the oil pan is set up for oil flow!!!
I also heard that Coby did alot of R & D and found the right way of doing it... I know Rickey G knows about this too!!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 09, 2005 07:17 AM
Brian..... I will haveta maka my waya over to SpeedFaba
Anyone got a pic of Cobys pan??
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
entropy
Moderator
Posts: 8671
|
posted January 09, 2005 07:19 AM
does Coby sell 'em???
I'm in the market
BTW; Brock has a prototype of a SW for the 12; dyno testing is this week...
I support the hell out of Muzzy and will continue to do so, but I support Brock also (when practical).
____________
This moderator uses moderation in moderation
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 09, 2005 07:52 AM
Call Coby Adams: 1-704-201-6383
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
VincentHill
Needs a life
Posts: 6520
|
posted January 09, 2005 08:24 AM
 Edited By: VincentHill on 10 Jan 2005 13:00
The JackShow in Hawaii also mods the pans and here are some pictures by way of Mad Mike site The First Pic is of his bike (And a few other things "His PIT Crew"??)
The Jack SHow at work
Girl #2
Girl #4 not in the picture
Girl #3 I do not think this is Brian
It is not easy to weld Cast and Sheet becasue of all the air in the cast. Yes it could look better, but the idea is there!
____________
Made History @ Daytona and still one fast old man!!
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted January 09, 2005 02:16 PM
Someone needs to take a welding class
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 09, 2005 02:51 PM
Welding class???...All I see is 3 girls sitting in front of a Red 12
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 09, 2005 02:58 PM
Brog did take a welding class.... but I dont think his schedule permits time off for fabbing oil pans now...lol.
quote:
Someone needs to take a welding class
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
wezze93
Expert Class
Posts: 127
|
posted January 09, 2005 08:15 PM
them girls are hot as hell
|
your car is slow
Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted January 09, 2005 08:38 PM
quote:
them girls are hot as hell
Yea..in that sort of "Id fuck you if I were drunk enough and I didnt have to take you out in public" sort of way.
____________
Do not taunt happy fun ball!
|
spencercyclecom
Zone Head
Posts: 535
|
posted January 09, 2005 09:11 PM
yeep....i agree YCIS
____________
Thanks
Doug Ray
SpencerCycle.com
SpencerCycle Center Inc.
Spencer Performance Group Inc.
Toll Free 1-800-510-1945 ext #10
International 1-800-510-1945 ext #11
Local/Tech 1-704-642-0987 ext #12
Fax 1-704-642-0987
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted January 10, 2005 04:12 AM
I think one of them is a MAN BABY lol
|
Spyral
Pro
Unpredictable individual.
Posts: 1071
|
posted January 10, 2005 06:02 AM
The girl on the right is really TurboBlew.
____________
Now, I am become Death, the destroyer of worlds.
|
VincentHill
Needs a life
Posts: 6520
|
posted January 10, 2005 01:07 PM
Did anybody notice How the mod to the pan was done??The picture of the Biks was the only one I could find and part of it was blocked by the women. SO here is a few other pictures without the Bike in the way!
____________
Made History @ Daytona and still one fast old man!!
|
entropy
Moderator
Posts: 8671
|
posted January 10, 2005 04:23 PM
Edited By: entropy on 10 Jan 2005 16:24
Zx12 cut pan
$350 Busa Billet pan 
____________
This moderator uses moderation in moderation
|
VincentHill
Needs a life
Posts: 6520
|
posted January 10, 2005 06:24 PM
I would surely pay $350 for a pan like that becasue the one above cost about the same with the price of the original pan!
____________
Made History @ Daytona and still one fast old man!!
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 10, 2005 06:31 PM
Muzzy doesnt sell the billet pan for the ZX12 for 350.00
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted January 10, 2005 06:36 PM
We can eliminate any oil starvation problems with the Muzzy Dry Sump kit for the low low price of $ 1,695.00...
Compared to the cost of a new motor its worth it, but thats a nice chunk of change, then need to buy the oil tank!!!
If I buy another 12 then im buying the kit, but now its not worth it to me...
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted January 10, 2005 06:50 PM
I don't see the point unless you're running a sidewinder exhaust, which CR, VH, and YCIS are not last I checked?
|
|
|
HOME
NEW TOPIC