Marcos Peguero
Zone Head
Posts: 568
|
posted October 12, 2004 03:37 PM
I wiould likE a picture
please.
   
|
wezze93
Expert Class
Posts: 127
|
posted October 12, 2004 06:33 PM
can you do the samethang to the mtc 2 stage lock-up puller
|
wezze93
Expert Class
Posts: 127
|
posted October 12, 2004 08:25 PM
will that mod work on a mtc 2 stage lock-up or could the puller in the lock-up work like it is because it is different?
|
DR JOE
Expert Class
Posts: 352
|
posted October 13, 2004 07:53 AM
Sorry for the misspell there psycho....
wezze93,
I don't see why you could not do the same thing to MTC part. All this is going to do is allow a little more oil to get to the clutchs is all, as long as the hub is drilled. This mod will not help if the hub is not drilled. Remember Do not use any thing bigger than a #40 drill bit. If you want start with a smaller size and go up from there that's fine. My bike has a #30 .1285 hole in it and it's a little big. It gets enough oil, that on the pipe it acts like a torque converter and wants to pull me forward when it's in gear.
Marcos, As for picture I would have to take the bike apart, if you can wait about a month I will tak it apart and take some pictures for you. If you want some help PM me your phone # and I will walk you thru it.
DR JOE
|
psycho1122
Pro
Posts: 1608
|
posted October 13, 2004 07:58 AM
Drill Bit???
On HARDEND STEEL??
____________
You say PSYCHO like it's a BAD thing!!
|
DR JOE
Expert Class
Posts: 352
|
posted October 13, 2004 06:57 PM
That's why you need to use a grinder to make a small mark on the shaft so the bit will go thru.
DR JOE
|
psycho1122
Pro
Posts: 1608
|
posted October 14, 2004 06:43 AM
EDM eliminates any need for "Grinding"
____________
You say PSYCHO like it's a BAD thing!!
|
DR JOE
Expert Class
Posts: 352
|
posted October 14, 2004 09:45 AM
What's a EDM???
|
psycho1122
Pro
Posts: 1608
|
posted October 14, 2004 04:45 PM
Electrical Discharge Machining/Driling
This makes a very CLEAN PRECISE hole in the pusher w/o effecting the hardend surface.
____________
You say PSYCHO like it's a BAD thing!!
|
DR JOE
Expert Class
Posts: 352
|
posted October 15, 2004 02:51 AM
Thanks, Now I know what your talking about. Seen one on the discovery channel a couple of weeks age.
DR JOE
|
|
|
HOME
NEW TOPIC