k bryant

Needs a job
Sponsor
Posts: 2911
|
posted September 09, 2003 10:35 AM
Do you lube it, or stick it in Dry?...
Reading the thread on clutch plates, brings up an interesting debate. We learned back in the 70's that you always layed new friction plates in oil before assembling, along with acetoning the steelplates and even emory clothing any burn marks out (if you couldn't replace them). So that's old news. But it got me to remembering....
Pistons - Do you lubricate the piston/rings/cylinder wall when assembling your motors? When I was racing, we'd assemble many motors dry to supposedly do away with the break-in period. You just didn't have time at the track to break them in, so we'd also run more clearance on the ring gap & piston to wall. Never seemed to have any issues, but we did tear down the motors every national and put in new pistons/rings, so longevity was simply based on making it through a National and/or weekend.
On a street motor, I'd always oil them up,and tighten up the clearances, under the theory that the pistons/rings would take longer to seat, but they'd last much longer. I've had lots of 50,000 plus mile engines that say it works.
So what do you do and what is your theory?
|
WARBIRD

Needs a job
Posts: 2739
|
posted September 09, 2003 10:45 AM
I have seen both done. My friend lubes the living shit out of his pistons, rings and wrist pins. I've seen him use everything from 20-50 motor oil to stp motor oil treatment. ( no kidding ) When the head goes on and the cams are in he's pouring thats stuff all over the top of the motor too. (cams ect.....) His engines ALWAYS perform top notch and last a long time to boot. Makes ya think.........some old school stuff can't be all that bad..........
____________
I'd Rather Be Roadracing.
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted September 09, 2003 11:16 AM
Edited By: Ninjaman12R on 9 Sep 2003 12:18
I say lube the crap outta yer parts......
An old mechanic here in town, who has been building engines of all sorts for many years, and knows his stuff, uses a 50/50 blend of STP and conventional motor oil as an assembly lube. How he arrived at that formula I'll never know (cause I've never asked ), but his stuff has a good track record.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted September 09, 2003 11:24 AM
Rick.... I thought I heard you complain to Harry and Bart about "sticking it in dry" at the last Deals Gap Rally...lol
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted September 09, 2003 12:30 PM
No you didn't???............... You DID,,,,,,
No you didn't just burn me!!!!!
What day are you heading to the Gap??? I'm still not 100% on when I'm leaving. Either Sunday afternoon, or Monday morning bright and early. I'd like to leave on Sunday, but I hate to arrive at the cabin so late. It'd be 12:30 - 1:00 am before we got there with no delays.
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
WARBIRD

Needs a job
Posts: 2739
|
posted September 09, 2003 12:37 PM
quote: Rick.... I thought I heard you complain to Harry and Bart about "sticking it in dry" at the last Deals Gap Rally...lol
Heh heh heh..........
____________
I'd Rather Be Roadracing.
|
TurboBlew

Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted September 09, 2003 01:09 PM
Im gonna leave this Friday after work. Find a place to crash... or not. Give Lucky and Sherm a call Saturday. See whats up. Make camp in Maryville maybe for Saturday (and keep it hot for Harry...lol)
Ride Sunday with Sherm and Lucky in the AM and meet you clowns in the PM. Stay Sunday and Monday. Leave Mon night.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
Ninjaman12R

Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted September 09, 2003 03:20 PM
bullshit
Your bitch ass better not leave Monday night!!!!
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
|
|