daidub
Parking Attendant
Posts: 4
|
posted March 16, 2010 02:20 PM
Wiring Diagrams.
Hi A number of people have suggested there are wiring diagrams listed in gmail!!! they have also given the username &p /word, problem is it doe'nt seem to work for me unless I'm looking in the wrong place?
I'm trying to find what the two relays behind the clocks are used for...... one seems to be cchattering when going over rough roads, causing the bike to cut out,. While coasting along I can restart no problem by the start button??? its just anoying....any ideas.????
____________
Dave Morgan
  
|
tuusinii
Pro
Posts: 1031
|
posted March 16, 2010 02:36 PM
Other relay is the TIP-OVER-RELAY. It shouldn't cut ignition unless the bike is really down...
|
daidub
Parking Attendant
Posts: 4
|
posted March 17, 2010 12:02 PM
Been out today for a couple of miles to get used to riding this bike before I take my son on the weekend! Problem seems to be getting worse!!! riding through slow traffic I can hear something 'chattering' which is cutting out the bike. Once up above say 30/40 mph I can still hear the chattering but due to the spped the bike runs normally.
Removed the two relays from behine the clock, cos that seems to be where the sound is comming from. Held the relays but cant quite feel if it is them???
Now its driving me mad........I just cant seem to bottom it out
____________
Dave Morgan
|
gmspecialist
Parking Attendant
Posts: 15
|
posted March 24, 2010 09:40 PM
dave, this is a suggestion as i deal with this stuff all day long.
remove the plastics and seat junk to access the wire harrnesses. Start your bike and idle it, wiggle test the harrness front to back and see if the bike dies. when and if it does your in the right spot.. Let me know what the outcome is..
G Mc
|
|
|
HOME
NEW TOPIC