HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: ZX-12 vs GSXR 1k NEW TOPIC NEW POLL POST REPLY
Hells Dark Lord


Needs a life
living life, and loving it.
Posts: 7981
posted November 27, 2002 09:58 PM        
well I guess after spanking my little brother a bit on his 1K i had to poke some fun at him, so I had a personalized lisc. plate made to poke fun at him....."ZIXER" now all he see's is the ZIXER in front of him taunting his GIXER.....lol
  Ignore this member   
moodybluezx12r


Expert Class
Posts: 344
posted November 28, 2002 08:44 AM        
man these 1000 owners must have hit there heads on something...basically you have 1000 owner claiming he beat a 12r at the drag strip (big Deal)...my first question is what times did both bikes run....example if the 1000 ran 7.2 in the 1/8 mile and the 12r ran 7.3 both riders can't ride..typically a good rider on a 12r can ride in the high 6.2's and low 6.3's...a great rider on a 12r can do even better...get this in your mind 1000 riders..everything being egual(skill wise) the 1000 will never beat a 12r at the drag strip or in highway racing...and thats a fact jack
____________


Raleigh, NC
Ride it! Like You Stole It!

  Ignore this member    Click here to visit moodybluezx12r's homepage. 
GOZR


Zone Head
GOZR
Posts: 716
posted November 28, 2002 10:31 AM        


You have realy to wenk it !


Fun dho!

  Ignore this member   
bigju


Expert Class
Posts: 238
posted November 28, 2002 12:27 PM        
Personally I like both bikes. Just discovering the curves in my limited riding time this year I would love a GSXR. The only problem is I can't bring myself to part with my 00 12R. Its like when the Busa Vs 12R thing was hot on LaBusas 3 years ago. If you can out ride the person on the other bike you will win. Unless the bikes are vastly different in power and delivery. I would have both of them if I could. They are both awsome bikes in my opinion
  Ignore this member   
harryzx-12


Needs a job
Posts: 3643
posted November 28, 2002 12:38 PM        
I burn't one to the ground last friday

I raced a GSXR 1000 last friday. I weigh at least 50lbs more than him and I fucked him up like a run over dog.We did 2nd gear roll on I immediately pulled away from him.This guy absolutely hates to lose. I smoked his ass bad top end too. I'm still running my original plugs and he has everything that can be done to his 1000. Yosh ems,autoshifter,short stacks etc. GSXR's
____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"

  Ignore this member   
TurboBlew


Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
posted November 28, 2002 06:14 PM        
Damn Harry, you turned this thread from PG-13 to XXX with your dirty talk....lol
I had no idea you are into domesticated animals. I know what to get you for your birthday!

quote:
By HarryZx12 ..... and I fucked him like a run over dog. He tried to kiss me I immediately pulled away from him. I smoked his ass bad too. .... GSXR's

____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!

  Ignore this member   
Ninjaman12R


Needs a job
as a Deal's Gap tour guide.
Posts: 4767
posted November 28, 2002 09:45 PM        
Damn.......

Too fuckin' funny!!!

Steve you've really been smokin' Harry quite a bit lately. I have a feeling he's got something planned for you.
____________

What we're dealin' with here is a complete lack of respect for the law.

Sheriff Buford T. Justice of TEXAS

  Ignore this member   
Hells Dark Lord


Needs a life
living life, and loving it.
Posts: 7981
posted November 29, 2002 01:35 AM        
tell us how it is Harry....lol
  Ignore this member   
harryzx-12


Needs a job
Posts: 3643
posted November 29, 2002 01:41 AM        
quote - Damn Harry, you turned this thread from PG-13 to XXX with your dirty talk....lol
I had no idea you are into domesticated animals. I know what to get you for your birthday!

I don't want any worn out animal you been porking for years.Is it true that when you tell your dog to heel he drops down on his chest and hikes his ass up in the air? Woof Woof motherfucker! I gotta go to work fuck ya now and later TurboDogFucker!


____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"

  Ignore this member   
kzz1


Zone Head
"Show me whatcha workin with"
Posts: 908
posted November 29, 2002 06:57 AM        

  Ignore this member   
Race


Parking Attendant
Posts: 23
posted November 29, 2002 08:42 AM        
I wouldn't buy one part 1

I belong to several other bike sites and on this one bike site we have a bike mechanic that really knows his stuff, well recently he posted a message saying he has now worked on the new GSXR he first said he had to spend all kinds of money for specialty tools just to open up the GSXR 1000 engine he claims to personally know the owner of this bike and says he is not the abuser type when it comes to motorcycles well he goes onto say that he could not believe how much wear and tear was inside of this GSXR 1000 he said it was way to severe for a bike with such low mileage and states he now believes by making this bike so light it has lost its durability to last and he claims no way would he ever buy one.
Hope this is not the case for all you GSXR owners but time will tell maybe even a short time according to this mechanics views...

____________
Race1

  Ignore this member    Click here to send Race an AIM message. 
Race


Parking Attendant
Posts: 23
posted November 29, 2002 08:44 AM        
I wouldn't buy one part 2

Here is this mechanics post about the GSXR took me a bit to find it again but this is exactly what he had to say :Quote:

I just finished doing a complete teardown on a 2001 Suzuki GSX-R1000. This bike is getting the all accolades and awards from the motorcycle press, but as usual, there's no mention of any of the service factors. First of all, you'll need to spend over $500 just for the necessary tools to open up the motor. The engine is extremely delicate with every effort to make it light in weight. It seems that the marketplace is putting all the emphasis on speed and to heck with durability. This engine even appears to be so 'toy like' that I really doubt if it can be dismantled more than a few times. This example only has 12,000 miles (street ridden with no wheelies or stunt riding) and has already suffered a lot of engine damage: rod and main bearings, counterbalancer bearings, and transmission.
If you have a problem with the cylinders, for example, you'll have to completely disassemble everything and possibly have to replace all three engine case sections as the cylinders are integral with the upper engine case.

The ZX-11 is, by contrast, a far better machine. There are many things in a good design, other than contributing to a low ET. The GSX-R1000 is exactly the kind of bike the Harley guys are talking about when they refer to the Japanese 'throw-away' motorcycle. I hate to work on any more of them, unfortunately I now have almost $2,000 in specific GSX-R 1000 tools, and will have to pull down several more just to recover these costs.

Would I consider owning one? No way!!! :un quote:


Pretty wild eh and these bikes are not cheap too buy, there is a few more post on this subject like how he knows the owner of the GSXR and his riding style.
_________________
Race 1
ZX11D
____________
Race1

  Ignore this member    Click here to send Race an AIM message. 
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted November 29, 2002 11:36 AM        
Can't say that we have seen any of this when tearing down the street bike engines and or the racebike engines either. The engine is built ultra light, but then so is the GSXR 750, 954, the R6 and R1. And as far as buying special tools welcome to being a mechanic. I would be curious to see what it was he spent $2,000 on as I have not noticed anything out of the ordinary. The engine is essentially a a GSXR 750 engine. If you worked on Suzuki's and considering the GSXR 750 has indeed been the dominate (only one really available) street bike, I would question the need for special tools. Now if it were a Ducati yes you will spend money on special tools for sure. But the last time I checked mechanics are hired for their skills and tools!

There are exceptions to the rule on assembly and quality. Swft's Silver 12 that is now a 1347 would not have lasted long in stock form. The The stock Crank shaft had significant wear and or gaulling (sp?) from the poor fit and finish of the crank and the nain bearings. It was an example of poor quality and assembly. Does this mean that all ZX12's are crap or bad? No! As is evident by the zillions of miles and fun most all of the people on this board have experienced.

I personally put no weight to a statement by a Harley owner about throw away Jap stuff. Harley owners spend more money on maint. and rebuilding then everyone else. They buy based on the look, the myth and emotion of wanting to be an outlaw so lets buy a Harley.


____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
kzz1


Zone Head
"Show me whatcha workin with"
Posts: 908
posted November 29, 2002 02:02 PM        
is what I think of Harleys! I agree with Zhoogian, I want to know what kind of tools he bought for $2000? Had to been a basic tool set I did buy for the Busa and Gixxer models a special socket set that removes the frame to engine mounting bolts that all suzuki uses on their models for $150. Without this socket set, you would have to use a brass punch and hammer to remove the bolt.
  Ignore this member   
r21xz


Expert Class
Posts: 109
posted November 29, 2002 02:06 PM        
I think no less of Zuki's 'cause of a post like that.
When the 12's came out,you'd swear they were the biggest pieces of shit built,by what the mag's said and all the bashing online.
Mine seems to be a "good' one so far.

Jeff

  Ignore this member   
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted November 29, 2002 04:44 PM        
Your right on Kzz1 the socket set is it. And Honda has their set as well! And yes, a brass drift works in a pinch.
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
zxart


Parking Attendant
Posts: 12
posted November 29, 2002 08:53 PM        
I am a motorcycle mechanic at a suzuki dealership. I have yet to see any problems with the gsxr1000 besides a few burnt clutches. But again most of them never see past 500 miles before getting totaled in an accident.
  Ignore this member   
ZHooligan


Moderator
Post Whore Extraordinaire!
Posts: 3829
posted November 29, 2002 09:23 PM        Edited By: ZHooligan on 29 Nov 2002 21:24
Now that I can believe! Imagine if you could by a street legal CART car for $10,000. How long would they last on the street with the average 21 year driving them?!!
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.

  Ignore this member   
ricksgsxr


Zone Head
Posts: 511
posted November 30, 2002 11:42 AM        Edited By: ricksgsxr on 30 Nov 2002 11:46
Geez, Blink (Carl) if your who I think you are.. Did i ever talk shit about my 988cc, at that time crappy Hindle pipe, no pc and 2 up on the rear have a chance against your 1270, Geared up and down, Dymag etc 12 on that fun day going to Waycross with Shawn? If your not the same person-disregard I had no second thoughts I had a remote chance and your 12 I'm still envious of!

I never bought my 1k it to race busa's and 12's. Just those are the only ones that like to play and have won and loss many times. Most, not all of the other 1k owners are into stunts or roadracing or just cocky little squids. The 12 was the bike i wanted first and when the '02's came out I put up the 1k on the market and could not sell it for what I wanted. So I kept it, and decided I wanted more power. The goal was not to make it a 12/busa killer but certantly with the added hp would give some a headache! I just was bored with what i had with YCIS spraying me didn't help any . The carbon buildup on the valves is why I went all motor vs the turbo. I'm sure if i can get the front end to stay down it will be quite the the little bike and will give some fits. I only have 1070 cc but win or lose all in fun. Once I get the wheelie problem sorted will spray it. I think the Carillos will handle the extra hp.

Anyway, bike should be done in a week or two. Hoping for mid 180's before NOS.

Rick

  Ignore this member   
ricksgsxr


Zone Head
Posts: 511
posted November 30, 2002 12:01 PM        
quote:
:Quote:

I just finished doing a complete teardown on a 2001 Suzuki GSX-R1000. This bike is getting the all accolades and awards from the motorcycle press, but as usual, there's no mention of any of the service factors.

Mine after 13000 hard miles looked okay. The tranny had a little spot but I have missed a gear or two before. The tool(s) needed post is bizzare for a shop doing this kind of work.

Lighter bike = smaller, thinner parts. Early versions the wheels had problems breaking. I pulled the counterbalancer and race balanced the crankshaft. It's tiny and some go the lightning route but not much there to remove and I passed.

Rods were replaced with Carillo's, Cams are mild Yosh with Titatnium retainers, 750 valve springs, Falicon Clutch Basket, HD cam chain and APE cct, and other little bits. I hope it stays together!

The ones I hear blowing up are due from the oil pickup line clogging up with clutch fibres. I'm a pussy and lack the track skills so just rollons for me. Clutch should hold up fine and I'm anal about oil/filter changes- done every 8-1000 miles.

  Ignore this member   
FuckMeRunnin


Expert Class
Posts: 123
posted November 30, 2002 12:45 PM        
I'm not racing you Rick unless I put spray on my bike! You will have a very fast bike for sure.
____________
"What happens if you get scared 1/2 to death twice?"

  Ignore this member   
blink


Novice Class
Posts: 48
posted November 30, 2002 03:18 PM        
Yeah Rick, it's me. I can't wait for you to have your bike running running again. I'm sure it will run great. I guess I'm just going to have to settle for having a smooth riding bike. Slow and smooth. I'll put an "SS" sticker on it too. It will go real good with my AARP sticker. The only gas I've got comes from leftover Thanksgiving dinners.
  Ignore this member   
ricksgsxr


Zone Head
Posts: 511
posted November 30, 2002 07:44 PM        
Kinda weird pop on the board , read your post than an hour later see ya at Cycle Source! So what's next for your rolling showcase? the Ohlins forks look great . Well, Hope to see ya at CAW one of these Saturday's and we need to do either Lake City or Waycross again. I hope I can stay up this time ...


FuckMeRunning: Have I met ya at HPCycles? I'm hoping next Saturday my bike will be done. Will need a few weeks to get some miles on it and after Christmas get out that way for a Saturday ride with Jeff and Paul, Harry if he's in town, YCIS, Turboblew, My Busa Buddy and a NOS 1k. Might be a stretch to get everyone. It's all fun for me. Speed on todays machines, win or lose still a thrill for me . Just losing keeps my savings account empty!


  Ignore this member   
Hells Dark Lord


Needs a life
living life, and loving it.
Posts: 7981
posted December 01, 2002 04:52 AM        
its all about the fun.......
  Ignore this member   
psycho1122


Pro
Posts: 1608
posted December 02, 2002 03:12 PM        Edited By: psycho1122 on 2 Dec 2002 15:26
My experience w/ a 1K is a buddy of mine who's allowed to ride a friends.

This "Thing" is way Modified.......
Yosh Cams
Port and Milled Head
OZ wheels
PCIII
Lightend up everywhere
Net: 164 h.p. on the same dyno MY 12 made the 202 hp on.

My 12 and I weigh 740 lbs. where as the 1K and my buddy weigh 560 lbs.

A difference of 180 lbs.!!

Power to weight Ratio's.....(w/ rider)

3.414 : 1K
3.663 : 12R

With both bikes having stock gearing, the 1K should have an ADVANTAGE.

My Friend chose the gear to start in and the speed......My 12 would jump out a bike length or so and pull away slowly from there EVERY time in ANY gear!!

I feel the major "X" factor is the "Ram Air" system and second "Torque".

Needless to say he was Impressed. I also rode the "THING" and It does effortless freeway wheelies as long as you want!! FUN, FUN.


____________
You say PSYCHO like it's a BAD thing!!

  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: ZX-12 vs GSXR 1k NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.32243680953979 seconds processing time