Wozza
Parking Attendant
Posts: 16
|
posted May 20, 2009 08:19 AM
New to the ZX12R
Alright Lads and Ladies...
My first post. Hi to all, great site..
I've just sold my Yamaha Fazer 600. I'm going to take a spin on a ZX12R 2003 on Saturday...
I've been told to treat it with the upmost respect or i'll end up on my arse...
Anyway, buying guide. What to look out for etc...
20,000 miles on the clock.
Cheers
Wozza
|
Stuart Racing

Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted May 20, 2009 03:09 PM
WELCOME ABOARD.....
You will fnd lots of info here if ya need it....
____________
Life in the Fast Lane..........
|
almost_les
Zone Head
Posts: 590
|
posted May 20, 2009 05:34 PM
check:
fork seals
spocket condition, likely indicative of chain condition
leaks, don't be afraid to crawl under it
brakes, pads and rotors
make sure its got decent tires on it
might be due for a new cam chain. take a big ass bolt or a screwdriver and press it up to the engine and pu the other end to your ear. works kinda like a stethocope so you can hear the internals.
|
Wozza
Parking Attendant
Posts: 16
|
posted May 21, 2009 12:42 AM
Cheer for reply lads...
Let the investigating begin.
W
|
Dane
Expert Class
Posts: 235
|
posted May 21, 2009 07:59 AM
Edited By: Dane on 21 May 2009 16:02
Welcome to the jungle.......we've been expecting you.j/k ..lots of good guys on here to help. Dont be afraid to ask questions, they help us all.
|
thekaz

Needs a job
spell chequer is bustimicated
Posts: 2909
|
posted May 21, 2009 10:44 AM
hey welcome
Don't forget to post pics of your new bike and your girlfriend or mom
|
dougmeyer

Needs a job
moderated
Posts: 2713
|
posted May 22, 2009 04:36 PM
Welcome,
Don't be afraid to ask us anything- even stuff about ZX-12's!
Doug
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
Wozza
Parking Attendant
Posts: 16
|
posted May 25, 2009 12:33 AM
Right I brought bikes out for a spin...
Fireblade on Friday and ZX12R on Sunday.. both v powerful bikes...
I'm 6'4" so found the 04 Blade to be a bit small...Felt like I was falling over the handle bars..
ZX was a different story.. huge bike...
Here's a pic..

Although looking at a green one now... Look so well in green... 2003

So in conclusion, the blade is out... although going for a great price....
ZX is the bike for me.... leaning towards the green one...
|
Wozza
Parking Attendant
Posts: 16
|
posted May 25, 2009 01:30 AM
Are there any massive differences between the 2002 and 2003?? i.e. suspension/ handling/ gearing/ BHP etc. etc..
|
Fasttimez
Novice Class
Posts: 59
|
posted May 25, 2009 02:53 PM
The first generation ZX12's, well I call them first generation were the 2000-2001 models, they were basicly the same...2nd generation ZX12's 2002-2003 had mostly cosmetic changes made to them along with the new speed restriction regulation, 3rd generation ZX12's 2004-2005 ( and a 2006 model was made in Europe and Asia ) had alot of changes such as a 32 BIT ECU instead of a 16 BIT, secondary butterfly valves in the throttle bodies and some other electronic differences...but all in all the ZX12R hasn't changed that much...the biggest choice people have when deciding on a ZX12 is the look of the 2000-2001 model or the 2002-2006 model.
|
Wozza
Parking Attendant
Posts: 16
|
posted May 26, 2009 12:11 AM
Cheers for clearing that up...
Yes, liking the 2nd Gen (2002 onwards)... subtle changes like the vents in the fairing, nicer lines, and nicer finish to the ducting in the front...
Eases the mind a bit that there is not actually a bad year/ model to buy..
|
Fasttimez
Novice Class
Posts: 59
|
posted May 27, 2009 08:58 AM
The only issue I know of is with early model ZX12's...2000-2001, they had an issue with oil starvation in the clutch basket....this was taken care of on later models by adding additional holes for oil in the clutch basket.
|
Wozza
Parking Attendant
Posts: 16
|
posted June 02, 2009 12:44 AM
Edited By: Wozza on 2 Jun 2009 08:44
Well lads/ ladies,
Bought the green 12R on Friday... V clean....
20K miles on the clock...
2 Owners before me.
Exhaust has been changed but only rear section so looks kinda rough.. Can't really see it in the pic although it's the standard system to the can.... Like a 1 inch lip at bottom of can from old mounting point of standard exhaust...

How much is a full system from manifold?
W
|
Fasttimez
Novice Class
Posts: 59
|
posted June 02, 2009 10:41 AM
A full system will run you anywhere from $1000.00 USD to $1,300.00 USD....depending on stainless, titaneum or carbon fiber...the 12R benefits tremedously from a full system.
|
Wozza
Parking Attendant
Posts: 16
|
posted June 03, 2009 12:47 AM
Is there any particular brand that's best/ better/ more popular??? Due to fitment, sound etc...
THanks
W
|
Fasttimez
Novice Class
Posts: 59
|
posted June 08, 2009 03:46 PM
The Akrapovic full race system is the best for the 12R's that I've seen, I run it on my 2005 12R and it performs and sounds great...my bike is all black so I went with the carbon fiber canister.
|
Macnas

Expert Class
Posts: 102
|
posted June 14, 2009 07:30 AM
Hi Wozza, I 'm back on a 12 after taking a few years off bikes, I had a look at that 12 in Ballinalee, a good clean bike. I bought a '05 in black. I fitted a full Muzzy system and just waiting for my PC3 to be delivered. You'll get the best value Stateside right now, I ordered the Muzzy which was delivered 3 days later!
____________
Ar nos na gaoithe!
|
Virus
Parking Attendant
Posts: 1
|
posted June 21, 2009 08:33 PM
Hay guys just got my 2000 zx12r... it is also my first bike... just thought i would drop on here and say hello to everyone.
|
Wozza
Parking Attendant
Posts: 16
|
posted June 22, 2009 12:06 AM
Alright Macnas...
Yes nice and clean, was sold on the green. I test rode a 02 Red one prior to buying green although didn't stand out as much... love the green. Just have to match some clothing to it now...
How much did full Muzzy cost you... how does it sound?
W
|
Macnas

Expert Class
Posts: 102
|
posted June 23, 2009 03:44 AM
The Muzzy cost a little under $600 plus the shipping, I put the aluminium can (cheaper) on it. I just fitted a PCIII today, bought that from MandP, got rode on that one. The PC smooths things out alot but it still suffers from low end sluggishness. I'm still learning about this stuff.
Sounds........ angry!
____________
Ar nos na gaoithe!
|
|
|