HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Drag racing opinions !!! NEW TOPIC NEW POLL POST REPLY
sami1


Parking Attendant
Posts: 22
posted November 08, 2009 05:24 AM        
quote:
low 9s


This low 9s should be quite near the correct with good launch.

I have '05 12 also. It's stock from the wheelbase and engine (156hp/122Nm from the wheel). Lowered 50mm (about 2") from front and rear. Gearing 16/46. Typical times are with that construction something like 60ft 1,67-1,71s and 9,83-9,93@228-229km/h (~142mph). 9,7 is possible if everything goes perfectly.

For my mind peoples normally run with too long wheelbase. They waste time for slipping. You can made low runs by wheeling, but not by slipping. Also many can't understand how low tire pressures must be. I use quite high pressures (1,5bar) but pressures could be also near 1bar.

These are my experiences from the strip.

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted November 09, 2009 12:25 PM        
ive been 8s on motor with pretty much no wheelie to speak of. lots of slip though
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Drag racing opinions !!! NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.24970698356628 seconds processing time