VincentHill

Needs a life
Posts: 6520
|
posted September 02, 2002 03:09 PM
Tire Pressure?? 40 PSI?? Oil Filter? Do we need the type with the hex so that they can be wired??
____________
Made History @ Daytona and still one fast old man!!
|
harryzx-12

Needs a job
Posts: 3643
|
posted September 02, 2002 04:22 PM
COOL!!
quote by ZX12Richard - Hey Harry... King(Wayne) is going to be putting stage 2 on this weekend if things go right...... Big horsepower I hope.....
Wish I could afford Nitrous!
quote by YourDickisSmall -I gotcher muffler right here liver lips!
You couldn't muffle a Z-50 with that!
Hey Steve , I was thinking a muffler off a mack truck might be big enough!
____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"
|
oldkawboy

Needs a job
Posts: 2125
|
posted September 02, 2002 05:05 PM
Vincent,
I ran 50psi in mine but alot of people run more than that.
You can put a hose clamp around the oil filter and secure the clamp by safety wire.
Dan
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 03, 2002 05:18 AM
quote: Tire Pressure?? 40 PSI?? Oil Filter? Do we need the type with the hex so that they can be wired??
I used an automotive hose clamp around the filter and wired that. Tire pressure on my 199~202 runs was 46psi front and rear. Like Dan said don't run a drag racing strap on the front the road is rough and you'll want suspension to work freely.
|
VincentHill

Needs a life
Posts: 6520
|
posted September 03, 2002 06:54 AM
I have my "Rag" on the Lift! (First time to use the Universal adaptors on the "EASYRIZER"! worked real well AFTER I raised the bike with some 2 x 6's!) Starting at the front wheel and working my way to the rear wheel! I cannot see much difference in what they need and AMA Tech except the configuration of the Kill switch! Thanks for the advice on tire pressure (I guess the max pressure is 46, so I will use that and the solution to the oil filter!!)
Last question (for today) is tires! Anyone seriously considered the new Dunlop 208ZR?? Jointless construction, lighter, more compliant and better traction along with wear?? Less Rolling resistance should mean less power needed for a given speed??
____________
Made History @ Daytona and still one fast old man!!
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 03, 2002 10:12 AM
Why would it have less rolling resistance?
____________
Do not taunt happy fun ball!
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 03, 2002 12:43 PM
Anyone know the rule on Radiator fluid? They require 100% distilled water and no antifreeze/coolant like track days? or do they not mind since you are safety wiring the plug anyway?
I need to change my fluid and figured id fill it with distilled only (and water wetter) if thats what was required at maxton.
____________
Do not taunt happy fun ball!
|
harryzx-12

Needs a job
Posts: 3643
|
posted September 03, 2002 12:55 PM
Leave it dry YCIS, I've got a special liquid I'll fill it with for you!
____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"
|
VincentHill

Needs a life
Posts: 6520
|
posted September 03, 2002 01:38 PM
I am glad someone mentioned that! Forgot all about that!!
____________
Made History @ Daytona and still one fast old man!!
|
VincentHill

Needs a life
Posts: 6520
|
posted September 03, 2002 02:11 PM
quote: Why would it have less rolling resistance?
Like Radial Tires have less resistance to roll than Bias Ply, the more perfect the "Roundness" of the tire, the better it rolls! Because this tire holds it shape and is in better shape to begin with, they use less rubber to cover for the imperfections of other tires! This is (Supposed) to be why they weigh less and run cooler and offer less resistance, while conforming to the road for better traction!
____________
Made History @ Daytona and still one fast old man!!
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 03, 2002 02:34 PM
Interesting...id think at speed...all tires would expand and have a similar contact patch on the ground.
Learn somethin new every day
____________
Do not taunt happy fun ball!
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 03, 2002 03:29 PM
Regular coolant is fine for Maxton..
|
VincentHill

Needs a life
Posts: 6520
|
posted September 04, 2002 06:37 AM
I said that I would wait 1 day before the next question! Does anyone pry the brake pads back or do they pump check your brakes before a run?
____________
Made History @ Daytona and still one fast old man!!
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 04, 2002 08:05 PM
quote: I said that I would wait 1 day before the next question! Does anyone pry the brake pads back or do they pump check your brakes before a run?
They don't check your brakes before a pass just during tech. I've heard of seperating the pads to reduce friction but I'm not sure I want to be pumping the brakes at 200mph at Maxton because the shutdown area is very rough. If you miss the first turn off the road actually breaks up into very rough patches pavement further down where it wouldn't be fun trying to get the lever firm but hell never say never especially if you're like 1mph shy of a record!!
|
Your Car Is Slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 04, 2002 08:46 PM
What is the record actually? Is there a "stock" and "modified" class?
Do they count nitrous with the "forced induction" bikes too?
____________
Do not taunt happy fun ball!
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 05, 2002 02:00 PM
There are many classes; production, altertered, streamliner, gas, fuel, blown, then you have engine sizes... the list goes on and on.. the overall record is 235.x mph held by steve knecum on a blown 400+ rwhp hayabusa goto the East Coast Timing Assoc website for more info http://www.ecta-lsr.com oh and btw breaking 200 mph doesn't put you in the 200-club you have to actually break an existing record over 200 to become a member.. weird huh? I think I hold the lowest speed record over 200 (202.593 in APS/G 1350) so you might want to shoot for that if you're trying to get into the 200 club. If you run nitrous you have to run in /F (fuel) class. If you are a turbo you have to run /B (blown) etc etc.
BTW production means bone stock including stock exhaust; aftermarket pipes even slipons must run in alterered or modified... a list of records is available on the website I mentioned..
|
VincentHill

Needs a life
Posts: 6520
|
posted September 05, 2002 02:09 PM
Thanks!! After a few runs, I will then know what I will do!
____________
Made History @ Daytona and still one fast old man!!
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 05, 2002 02:23 PM
ok...whats the record for the /F group
____________
Do not taunt happy fun ball!
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 05, 2002 05:36 PM
Unfortunatly you have to choose a class at sign in and register for it. To change classes it's another ~$100 per class change I think so choose wisely before you begin. In other words you can't just say I went XXX mph so that beats the record in YYY class... you have to designate and register for each particular class in which you are shooting for a record _before_ you make the attempt and your bike must be labeled with the class on the side clearly.
You can do your current record homework on the website but it's not always up to date! There will be an accurate current record book available at tech/sign-in area for your review the morning of registration both days.
I've done some basic research that I will share with you so here's a list of what you might want to consider running in:
APS/F-1350/4 Fish's Customs R. Bush May-01 205.479
APS/G-1350/4 Don't Be Scared Racing Bergie Frazier Jr. May-02 202.593
APS/F-1650/4 Scott Guthrie Racing Scott Guthrie Sep-00 204.082
APS/G-1650/4 Scott Guthrie Racing Scott Guthrie Sep-00 204.545
APS/F-2000/4 Scott Guthrie Racing Scott Guthrie Sep-00 203.160
APS/G-2000/4 Scott Guthrie Racing Scott Guthrie Sep-00 204.545
APS/F-3000 Scott Guthrie Racing Scott Guthrie Sep-00 204.545
APS/F-3001+ Team Millholland Dan Millholland Mar-02 202.247
APS/G-3001+ Eastern Cycle Performance M. Sweeny Jun-01 201.794
MPS/F-1350/4 Adams Performance C. Ellis Sep-99 202.816
MPS/G-1350/4 Peter Jones P. Jones Sep-98 202.247
MPS/F-1650/4 Adams Performance C. Ellis Oct-99 210.280
MPS/G-1650/4 G.P. Racing of Miami R. Martin Sep-01 205.011
MPS/F-2000/4 Scott Guthrie Racing Scott Guthrie Sep-00 210.342
MPS/G-2000/4 Scott Guthrie Racing Scott Guthrie Sep-00 206.897
MPS/F-3000 Scott Guthrie Racing Scott Guthrie Sep-00 204.545
MPS/G-3000 Scott Guthrie Racing Scott Guthrie Sep-00 204.545
So if you're running nitrous the minimum speed you are trying to break is 202.247 in APS/F-3001+. Minimum motor-only 201.794 in APS/G-3001+. Doesn't sound like much but trust me you'll be happy just to break 200 at Maxton it's hard to do!
|
oldkawboy

Needs a job
Posts: 2125
|
posted September 05, 2002 05:46 PM
Gee Bergie, thanks for picking my record for him to break! LOL :-)
Honestly, I'll help anyway I can for you guys to become members in the 200mph club. Good thing about it is that if your existing record is broken you are stll in the club....So go for it and lets have a great time.
Dan
|
your car is slow

Needs a job
Fuck Nitrous...Got Boost?
Posts: 4089
|
posted September 05, 2002 06:13 PM
hehe....im bringing the 42 jet just in case 216hp isnt enough for 202.248mph
One last question...can more than one person sign up and register and ride the same bike? Meaning...can you have 2 or more riders register and ride the same motorcycle? or is it one rider per bike?
____________
Do not taunt happy fun ball!
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 05, 2002 09:09 PM
Edited By: RAC4IT on 5 Sep 2002 22:14
YES you can share the bike and switch... it's each rider that registers. Note you have to inform TECH between every rider change... there is a sign-in sheet everytime you switch; can't just switch without notifying them who is on-board I guess it's insurance related.
We switched riders a couple times on Sunday in May and it was fun! YCIS bring the big pills and dont be skeerrred well you know that's what they tell me anyway So to get you guys in the mood here are some photos from the last couple Maxton events I went to.
http://www.dontbescaredracing.com/photos/events/052602
http://www.dontbescaredracing.com/photos/events/102701



I forgot to mention in previous posts about ECTA/Maxton that VP Racing Fuels is now a sponsor of the event and as such anyone attempting to set an official land speed record is REQUIRED to use their fuel. This means no Nutec or pump gas if you plan on going for a record and they seal your tank after you purchase the fuel from the on_site vendor. Technically you can bring your own VP fuel however it has to be "certified" by the VP rep on site and your tank sealed BEFORE you make your record pass, otherwise it doesn't count. Just thought you might want to be aware of this so you don't haul your containers of Nutec around for no reason.. (pulled from previous post)
|
RAC4IT

Needs a job
Bergie
Posts: 3009
|
posted September 05, 2002 09:15 PM
PS take a good look at the road surface in the last photo... that's what the shutdown area looks like if you don't make the first turnoff
|
|
|