BALTIMORE410

Expert Class
Posts: 456
|
posted September 12, 2008 08:28 AM
brake upgrade
thinking about upgrading my brakes...... im kinda thinking about leaving the calipers alone with maybe a rebuild kit if theres one on the market and doing the following
upgrading the rotors
upgrading the lines
along with the master cylinder
and levers
now imma start doing a lil research on my own but i would love to get alil feedback on what people think are rather quality stuff or just plain crap lets be honest zx12r are pretty dam fast stock but me being the need for speed maniac i am i thought i start with the upgrading the stopping power before i start increasing power.....i mean that would be the smart thing to do right guys..and gals??
|
shane661

Needs a life
Posts: 11494
|
posted September 12, 2008 08:43 AM
I put these on my 12:


They are Braking brand wave rotors. About $700 for a set of three. They have worked well for me. However, I think you would get most of the braking performance with stock rotors, good lines and pads.
Shane
|
BALTIMORE410

Expert Class
Posts: 456
|
posted September 12, 2008 08:53 AM
nice set up
|
hyper12r
Expert Class
Posts: 119
|
posted September 12, 2008 01:01 PM
Edited By: hyper12r on 12 Sep 2008 14:03
quote: 1)brake fluid,pads and lines change them togather..(should be much better) if not then...
2)brembo master pump
3)braking or galfer disc
4)if doesnt improve get 04-06 fork from ebay and zx14 nissin brakes caliper
5)if still not good change the nissin caliper to brembo....
hope that helps.
http://www.bikeland.org/board/viewthread.php?FID=1&TID=41235&set_time=
|
BALTIMORE410

Expert Class
Posts: 456
|
posted September 13, 2008 08:06 AM
lines and pads on order
|
oldkawboy

Needs a job
Posts: 2125
|
posted September 15, 2008 08:53 AM
Stephen,
Here's a couple shots of your wheels.
Now all you gotta do is get home safe from over there, mount these and your new brakes up and ride, ride, ride!

Dan
|
oldkawboy

Needs a job
Posts: 2125
|
posted September 15, 2008 08:56 AM
Sorry 'bout the crappy photo's.

Dan
|
Hells Dark Lord

Needs a life
living life, and loving it.
Posts: 7981
|
posted September 15, 2008 03:23 PM
Brakes pads, lines, and fluid.....I dont see a big need to go with more than this on the street. MY brakes on both my ZX12Rs were pretty dang good. My 02 was all stock except for the above changes. My 01 has EBC Prolite Rotors on it as well and does anything I need it to do. I have had it on the track and it hauls down with no issues. If I were going to ride this on the track on a regular basis, I would prolly put a MC off of a new ZX10R on it. The radilal MC gives better feel and progression. IMO
Kawi price for the radial MC is like $237....
____________
When in doubt, lean farther and go faster....
|
psycho1122

Pro
Posts: 1608
|
posted September 16, 2008 07:34 PM
Brake Tech Billet Iron rotors with CP911 Pads........
Braided lines with stock master and calipers............
Your 12 will stop like a 600!!!
Trust me, I had an AMA rider run my 12 at a trackday with that set up and he stated that he could use the same brake markers carrying alot more speed!!
____________
You say PSYCHO like it's a BAD thing!!
|
BALTIMORE410

Expert Class
Posts: 456
|
posted September 17, 2008 06:24 AM
ALREADY WENT WITH GALFER BRAIDED LINES AND PADS.......IMMA WAIT TILL OCT. 1ST TO SEE WHAT KINDA ROTORS IMMA GET.......BY THAN MY DAD WILL START PUTTING ALL THE PIECES TO THE PUZZLE TOGETHER FOR ME.......FINALLY!!!!
|
Hells Dark Lord

Needs a life
living life, and loving it.
Posts: 7981
|
posted September 17, 2008 08:00 AM
rotors arent cheap....take what you have and ride it.....you may like it just fine and save yourself 600 or more dollars.
____________
When in doubt, lean farther and go faster....
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 17, 2008 02:57 PM
are those wheels for sale?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
oldkawboy

Needs a job
Posts: 2125
|
posted September 17, 2008 05:46 PM
Nox,
I recently sold them to Baltimore (who started this thread) and he wanted me to remove the rotors & sprocket and send him the photos.
He's in Iraq and emailing him the pictures may not work so he asked me to post them here.
Dan
|
psycho1122

Pro
Posts: 1608
|
posted September 18, 2008 06:14 AM
quote: rotors arent cheap....take what you have and ride it.....you may like it just fine and save yourself 600 or more dollars.
I hear you...... However, stock rotors WILL warp under trackday conditions. I had to change out the stockers due to this.
____________
You say PSYCHO like it's a BAD thing!!
|
ZuminaZX

Expert Class
Posts: 128
|
posted September 18, 2008 04:04 PM

I have brembo full float discs, spiegler ss lines, and ferrodo HH pads, still not happy with braking power. Perhaps it's the pads, but I have very little initial bite and I have to use four fingers to get any kind of power out of the system. I'm going to switch to a ZX10 master cylinder and see what happens.
|
Shane661

Needs a life
Posts: 11494
|
posted September 18, 2008 04:05 PM
Edited By: Shane661 on 19 Sep 2008 00:06
If it takes 4 fingers, you have a mechanical issue with the system. My bike stops from 180 mph with two fingers, easily.
|
|
|