Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 02, 2008 02:49 PM
That is a good idea, but with the cometic gaskets, mine has been off at least 50 times.......
My issue is this............, I need to put a fan directly on the clutch............, when you hot lap, you need to cool the clutch.....,
put a big ass fan on a zx12 with the cover off and see what happens....., oil everywhere.........
But, wolf does have a good idea, but really, it only takes another minute or two, and you still have oil leakage either way.........
with a true quick access cover, no oil should ever come out...........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
  
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted September 02, 2008 03:31 PM
Nox, wild assed idea, ever thought about putting a fairly high pressure fan blowing thru a hole in the clutch cover with the air exiting thru the oil fill hole? you could machine the cover to take a small screw in cap. im thinking along the lines of an air pump you use to fill an air matress...
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 03, 2008 06:14 AM
I already do that....., I use a stanly blower fan........., it works okay, but I cant cool mine as fast as the guys with a quick access cover.........
Good idea though........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
bobbydigital17420
Expert Class
Posts: 142
|
posted September 03, 2008 02:49 PM
question why would you group buy a clutch cover?????? or am i missin the point. why does a group of poeple need "A" clutch cover.. would you want your own?? how do you share it
|
Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 03, 2008 03:47 PM
Built by a cnc machine.........
We each get one, but its more cost effective this way..........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 03, 2008 03:48 PM
I just thought of something.........
How is the bearing support going to be set up in this........? If it cannot be set up with a bearing support........, I will not be interested.....
I hope I did not jump in too quick......
chavcat, please find this out asap........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
chavcat
Zone Head
Posts: 524
|
posted September 03, 2008 05:48 PM
I spoke with Tim last night about this and sent him pictures of the MTC bearing in the hub. This will be included in the cover sa Tim is aware of the need to supprt the puller.
|
woppi
Pro
Posts: 1362
|
posted September 03, 2008 10:34 PM
quote:
question why would you group buy a clutch cover?????? or am i missin the point. why does a group of poeple need "A" clutch cover.. would you want your own?? how do you share it
we all ride a mtc lock up clutch !!!! for cooling and adjust --------------------------------------we want go easy and fast inside the clutch -- its better to use a ZX12R Billet Quick Access Clutch Cover !!!!!!!!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted September 03, 2008 11:31 PM
quote:
question why would you group buy a clutch cover?????? or am i missin the point. why does a group of poeple need "A" clutch cover.. would you want your own?? how do you share it
you definatly missed the point. it takes a lot of work to design a custom machined part, and a lot of work to set up a cnc machine to make it, but once its setup, you can make several more with little effort (no designing or setup costs, just the raw billet). a group of guys go in on a batch to cut costs for everybody. for example(made up numbers), it may cost you $1000 to make one, but only $100 more to make a second one. so if 5 guys each wanted one, the total would be $1400 devided by 5 =$280 each instead of $1000 each
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
wolf racing
Expert Class
Posts: 138
|
posted September 04, 2008 12:06 AM
NOX - For oil, we have a stand so the bike is leaning over, then fan over the top blowing in, and no oil comes out at all.
Cheapest way without going to the best way which is quick access.
chavcat - pics coming. I have to take some as I don't have any in my files. Over the weekend.
Wolf
____________
Never Ever Give Up
|
chavcat
Zone Head
Posts: 524
|
posted September 04, 2008 03:10 AM
Wolf-thanks for the offer of the photos. Tim is really looking forward to the photos-try to take as many as possible in-line/perpendicular to the cases etc.
Mike
|
Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 04, 2008 05:28 AM
quote:
NOX - For oil, we have a stand so the bike is leaning over, then fan over the top blowing in, and no oil comes out at all.
Cheapest way without going to the best way which is quick access.
chavcat - pics coming. I have to take some as I don't have any in my files. Over the weekend.
Wolf
When you get around to having me help you with your lock up, I will explain some problems with this..............
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
Nox
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted September 04, 2008 05:29 AM
quote:
I spoke with Tim last night about this and sent him pictures of the MTC bearing in the hub. This will be included in the cover sa Tim is aware of the need to supprt the puller.
Excellent.
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
wolf racing
Expert Class
Posts: 138
|
posted September 05, 2008 04:08 AM
NOX - yes yes........................soon
____________
Never Ever Give Up
|
woppi
Pro
Posts: 1362
|
posted September 08, 2008 10:57 AM
#
????????
any news ??????
???????????
thanks
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
woppi
Pro
Posts: 1362
|
posted September 10, 2008 02:42 AM
?
quote:
#
????????
any news ??????
???????????
thanks
woppi
????????????????
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
chavcat
Zone Head
Posts: 524
|
posted September 10, 2008 03:52 PM
Nothing to report; I'll be passing the cover to Doug Ray to forward to Tim in 2 days. Any photos coming Wolf?
|
wolf racing
Expert Class
Posts: 138
|
posted September 11, 2008 02:20 PM
Yea..apologies, been laid out with the flu... coming good and will get some pics done inthe next day or so..
Also for you Woppi..
Wolf
____________
Never Ever Give Up
|
chavcat
Zone Head
Posts: 524
|
posted September 11, 2008 04:11 PM
Thanks-look forward to the photos.
|
woppi
Pro
Posts: 1362
|
posted September 11, 2008 10:37 PM
quote:
Yea..apologies, been laid out with the flu... coming good and will get some pics done inthe next day or so..
Also for you Woppi..
Wolf
! ! !
thank´s for info !
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
chavcat
Zone Head
Posts: 524
|
posted September 17, 2008 07:07 PM
Woppi & Nox - pm's sent
|
woppi
Pro
Posts: 1362
|
posted September 17, 2008 11:27 PM
quote:
Woppi & Nox - pm's sent
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
woppi
Pro
Posts: 1362
|
posted October 07, 2008 03:09 AM
?
any news ?
?
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
chavcat
Zone Head
Posts: 524
|
posted October 07, 2008 04:53 PM
CAD drawings are underway. No hard parts yet. Plan is to include the bearing support in the cover.
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted October 07, 2008 08:11 PM
Excellent.........
Only drawback I see is the added weight........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
|
|
HOME
NEW TOPIC