Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 21, 2008 07:46 PM
So, who read their home work assignment?
The third article down called "Best Bell"
http://www.profblairandassociates.com/RET_Articles.html
____________
Y2KZX12R
CompetitionCNC.com
|
ninja12
Needs a job
Posts: 3310
|
posted February 22, 2008 12:41 AM
quote: Thanks Vincent for the kind words, I truly appreciate them but more so your friendship.
Now get out there and drum up some votes for Monica Lewinskys boyfriends wife!!!! :-)
Dan
EX-boyfriend, Mr Dan!
|
BEAR

Novice Class
Posts: 70
|
posted February 22, 2008 02:24 AM
Last Words on this topic
quote: What Y2k has said matches the results pretty well. Since the hp % increase remains linear with air density, the stacks will produce more net hp at speed with "ram air" effects.
So, the way I see it...Dan is right, Doug is right, Vincent is right, Y2k is right, and Bear is right.
Excellent thread.
Shane
You guys are killing me
The Q : DOES MUZZY STACKS WORK?????
I my humble opinion the muZZy stacks will work if they are(a copy) the same as the Bear stacks, If they are not I dont Know if they work never been tested
But there must be something in it ,Why did Muzzys make them or copy them if they dont work
Personally I dont give a s@#t, the BEAR stack work for me ,and if it helped anybody-els good, the price they were selling at does not even cover the cost of them.
Again Thanks to all, Doug, Dan, Vincent,Rickey and all who were involved at the beginning even all the boys from labusas where it all started in 2001
BEAR
____________
7.56@195 Worldfinals 2004
7.43@ 194 Britol 2008
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted February 22, 2008 06:08 AM
quote:
quote: Thanks Vincent for the kind words, I truly appreciate them but more so your friendship.
Now get out there and drum up some votes for Monica Lewinskys boyfriends wife!!!! :-)
Dan
EX-boyfriend, Mr Dan!
You obviously are not from AR, like I am, or you would not say that..........
Now, this is forever the end of political talk in this forum.
Back to the subject at hand.
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
woppi

Pro
Posts: 1362
|
posted February 22, 2008 08:11 AM
my wet nos system

the gold muzzy

the blue nos muzzy

woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
dougmeyer

Needs a job
moderated
Posts: 2713
|
posted February 22, 2008 08:25 AM
Thanks for gathering those articles, Y2. You saved everyone a lot of $. That's an expensive magazine to subscribe to.
Woppi- there are only two T's in tits. (maybe that will help me get some of my credibility back).
Pterodactyl
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
VincentHill

Needs a life
Posts: 6520
|
posted February 22, 2008 01:36 PM
quote: Thanks for gathering those articles, Y2. You saved everyone a lot of $. That's an expensive magazine to subscribe to.
Woppi- there are only two T's in tits. (maybe that will help me get some of my credibility back).
Pterodactyl
How about Titties? Should that be spelled Tities?
____________
Made History @ Daytona and still one fast old man!!
|
krexken
Zone Head
Posts: 732
|
posted February 22, 2008 01:48 PM
How do the stacks fit stroked engines? Since the cylinders are jacked up a tad due to the spacer , are they a little long or is there nothing to worry about?
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted February 22, 2008 02:55 PM
I have a purple set, got them just because they were so nice and perty!
With that said I’d like to see Ron Paul in office and Alex Jones as his running mate, just to shake it up a little.
Curious as well if the proper intake tract could be manipulated so that not only were it possible as noted above to shift the power curve left and right, but also take advantage of the harmonics set up to actually increase hp and not just shift it. A few of the “velocity” guys state that this is possible by keeping the intake velocity high and stacking the charge right before the intake valve closure. Any thoughts or comments would be great.
Stroker motor with Spacer and Stacks: Fit just fine, nothing to worry about unless you have bored throttle boddies. I only know a couple people personally that have that mod on a 12, but I am sure there are a lot out there.
____________
TFA 200MPH CLUB MEMBER!
|
Phantom13

Zone Head
Posts: 736
|
posted February 22, 2008 03:24 PM
quote: It's like the big Maxton top speed argument. I absolutely don't know how fast I went or why I was able to do that. All I know is that the measuring device (the clocks) said what the results were. That's always the case, isn't it. Did "so and so" go X mph? Well yes, if that's what the clocks said. Do we trust the clocks? Well, yes, we have to, or we might as well just pack up and go home.
Doug
It's not an argument, Doug. It's simply a typographical correction. You stated on several occassions that the bike was 100% stock with exception of removed mirrors and Muzzy pipe. Turns out, the bike was not only a FACTORY prepped and supplied bike.... but it also had the following modifications.
- Tall profile tire (alters gearing)
- Different sprockets (as stated by Dave @ Muzzy's himself)
- Lowered
- Race fuel
- God knows what else went on at the shop while the valve cover was off during the "valve clearance check" after break-in on the dyno. (so I read somewhere) Would have been mighty easy to set up the stock cams for up top while they were in there (if in fact they were not specifically degreed as such from the factory, being that this was a factory supplied test bike with the purpose of breaking 200mph... hell, I know I would have if I was trying to sell exhaust systems and/or ZX-12R's. Suzuki and other bike companies have been doing this for YEARS so their bikes fair well in magazine comparo's and whatnot. Common practice really.
Even the 199.1mph certificate stated it was done in the standing 1 mile. Very misleading (as is everthing else about this magical run) when in truth, the run was performed in 1.16mi using a near 100mph rolling head start.... with the assistance of a 15mph tailwind and cool 70*F conditions.
Doug, I don't doubt the speed obtain... because quite frankly, when you look at what it took.... it's really not all that impressive. What I'm concerned with is the claim that it was done with nothing more than a Muzzy pipe on a generic showroom stock ZX-12R as was repeatedly claimed.
You may be asking yourself why I even care. Well, when you play down a bike to make the speed obtained appear more impressive... it makes the speeds obtained by TRUE showroom stock 12's seem less impressive by comparison.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
Phantom13

Zone Head
Posts: 736
|
posted February 22, 2008 03:37 PM
BTW...
You're wrong about GPS not being accurate. At Maxton my GPS was within 0.2mph of the lights, 8 times in a row.
You're wrong about race tires not having any slippage at high speed. When you've got 200mph resistance against the bike, the tire will begin to slip, much like when you perform a burnout, only the brakes are providing the resistance. Maybe on the dyno it doesn't slip, but I have yet to see someone cross the timing lights strapped to a dyno.
You're wrong about the ceramic wheel bearings. They do work, if they didn't... they wouldn't be on just about every single record setting bike in the country.
You're wrong about the Bear Stacks. They are shorter than stock.
*flush*
There goes some credibility down the drain, Hoodini.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
shane661

Needs a life
Posts: 11494
|
posted February 22, 2008 04:37 PM
quote: BTW...
You're wrong about GPS not being accurate. At Maxton my GPS was within 0.2mph of the lights, 8 times in a row.
*flush*
There goes some credibility down the drain, Hoodini.
Must be the new, improved, record-setting Maxton lights. As opposed to the old ones that some people claimed were inaccurate.
In order to lose credibilty, one must have it to begin with.
No offense to anyone, but this argument is getting old.
Shane
|
Phantom13

Zone Head
Posts: 736
|
posted February 22, 2008 05:06 PM
Shane, you know the deal with the lights.... don't act like a sarcastic retard.
As for this argument..... YOU have no knowledge on the issue, nor do you have any type of credibility to warrent throwing in your $0.02, except of course if you count a wad of 170+mph slips as justification to open your mouth when discussing 200mph speeds and what it takes to achieve them.
Stick to what you know...... absolutely nothing.
P.S. - Leave the racing to Rachel.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
shane661

Needs a life
Posts: 11494
|
posted February 22, 2008 05:22 PM
quote:
nor do you have any type of credibility
I guess we are brothers in arms.
Let it go, already.
Absolute speed (mph) does not equal credibility, my friend.
Shane
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted February 22, 2008 05:40 PM
Dang, I thought the Busa guys over on the SH.org site were sensitive, but you blokes are on par with the salt and dirt boys.
I have not been on the board as long as you fellas, nor do I have the mechanical knowledge, nor experience, nor have I been over 197mph................................but
man I thought the 199.xxx mph Muzzy 12 thing has been beat and re-hashed to
it's fullest. Maybe that can go to the smack house, cause I sure am getting tired of it!!!
Any comments on velocity stacks, intake velocity, and or charge stacking would be
real cool.
____________
TFA 200MPH CLUB MEMBER!
|
Phantom13

Zone Head
Posts: 736
|
posted February 22, 2008 05:41 PM
No, we are not brothers in arms. We're not even friends if you really want to be honest.
btw, when I mention credibility, I'm not refering to moral credibility.
I took a health class in highschool, but that doesn't give me the credibility to enter a medical debate between two doctors.
See my point?
Bye-Bye now.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
shane661

Needs a life
Posts: 11494
|
posted February 22, 2008 05:51 PM
Edited By: shane661 on 22 Feb 2008 17:52
quote: No, we are not brothers in arms. We're not even friends if you really want to be honest.
Well, I'm sorry you feel that way. But I want to thank you for loaning us a sprocket at the last meet. I am willing to do the same for you, should you ever need it. No harm, no foul....I just don't agree with what you are saying in this thread.
Go fast, be safe....
Shane
|
osti33

Needs a job
Posts: 2973
|
posted February 22, 2008 05:52 PM
quote: So, who read their home work assignment?
The third article down called "Best Bell"
http://www.profblairandassociates.com/RET_Articles.html
Good read. I think it hurt my brain a little but thanks for posting it.
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 22, 2008 07:15 PM
It is interesting to read Blairs stuff. He has a way of explaining thats like dry English humor...
All those articles are great.
____________
Y2KZX12R
CompetitionCNC.com
|
Phantom13

Zone Head
Posts: 736
|
posted February 23, 2008 03:41 AM
Edited By: Phantom13 on 23 Feb 2008 03:45
quote:
quote: No, we are not brothers in arms. We're not even friends if you really want to be honest.
Well, I'm sorry you feel that way. But I want to thank you for loaning us a sprocket at the last meet. I am willing to do the same for you, should you ever need it. No harm, no foul....I just don't agree with what you are saying in this thread.
Go fast, be safe....
Shane
Don't act like this is news to you. You've always had something negative to say or imply when it comes to me on the forums and behind closed doors (I have ears and we know a lot of the same people). I don't know if it's jealousy or what, frankly I don't care.
Point is, a real friend wouldn't consistantly try to take shots on someone he considers a friend. You've done it to Ali, and you did it here with me, yet again. If you disagree with what I'm saying, a FRIEND would have PM'd me about it or kept his opinion to himself. It's one thing to say you're someones friend, it's quite another to act like one.
So no, we're not friends and you've reminded me of that yet again.
btw, I loaned RACHEL the sprocket. I think she's a great person, amazing rider, and I have nothing but respect for her as a lady and a racer. That's why I personally got on my hands and knees at the track to help put that sprocket on the bike for her. I'm the kinda guy that will bend over backwards for a friend, without requiring or expecting so much as a "Thank You" in return. Ask Sal, Ali, Dale, Ryan, or anyone else who is my FRIEND.
This is the last time I will Hijack this thread. Sorry to those who are discussing the stacks.
Shane, if you have anything else to say to me, do it in PM's.
Thanks.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 23, 2008 06:13 AM
Phantom13, why dont you go somewhere else to like the smack house where you can carry on with all this BS.....
I for one dont care to read all this type of BS. If I did i would go into the smack house.
You made your point long ago.... now move on.
Add somthing usefull to the thread.
____________
Y2KZX12R
CompetitionCNC.com
|
VincentHill

Needs a life
Posts: 6520
|
posted February 23, 2008 06:28 AM
Edited By: VincentHill on 23 Feb 2008 06:28
Phanton, JUST like me, I can set off a debate if I said there is Oxygen in the Air Saying that, Shane is Different and it took me a FEW Years to Begin to understand him. At one time, I felt that if he was dying of thirst, I would not Pee on him and this was After I had loaned him my Leathers, Gloves and rear Tire. He speaks from his heart at the Moment without thinking long term! That is Called being Young. I do not have the "Young" Excuse but I am guilty of the same thing but age milds this where he does not have the Age Filter.
Shane is OK and getting better at it. Even his best friends hate him from time to time but we all know deep down he IS OK! BTW, I think he has run 187 on his bike and Rachael in the 190's
Give him a little more room like I did and realize that even a Broken clock is RIGHT twice a Day
Now to Dr. Gary, you running 197 with your Aerodynamics is like Ali running 220
Mr. Phanton With the Limited budget & High tech tools, I do not think anyone has done MORE than you period (Well maybe the guy from Australia with the Indian! )
____________
Made History @ Daytona and still one fast old man!!
|
shane661

Needs a life
Posts: 11494
|
posted February 23, 2008 06:31 AM
Here is a Bear stack on top of the stocker. The innermost black ring shows the smaller i.d. of the stock velocity stack:

I can't say that you can feel a difference. But the bike runs good and has run right at 150 mph in the 1/4, and 193 in the standing mile, and has more in it. So, I am pretty certain that they don't hurt performance.
Shane
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 23, 2008 06:36 AM
Edited By: Y2KZX12R on 23 Feb 2008 06:42
OK, put down you pencils. Times up.
So, if any of you made it to the end of the article (its not easy reading) you can start to see why changing the shape of the end of the stack from a simple radius to an eliptical shape can be good.
One thing not covered by the article is intake tract length and phasing rof a given engine and rpm. Thats a whole different topic and is covered in huge detail in Blairs book .
But you can see that it wasnt the length on the stack that actually increased the CD it was the eliptical shape. The length only changed the timing of the wave reflection, and even at that the change in length wasnt really enough to change the timing more than a hundred or two rpms. Allthou the change to an eliptical shape had some effect on amplitude its biggest change factor was increasing the CD.
So there you have it.
So now the question is, is it the optimal design? Was it coppied from another application like a moto GP or F1 stack? Was it computated from these known perameters?
Or was it stumbled uppon?
Only the designers of them can answer that.
If I had one I could digitize it, and analyze it. In mastercam I can use polynominal smoothing and change the order of magnatude (like I do in my CNC port designs, shuuuuush!!!!) to optimize it according to Blairs data.
Althou I could make the modified version on the 5 axis CNC machine I'd rather not tie it up from head porting. It wouldnt be cost effective.
So I could bounce the finished code back to Bear or Muzzys for production. That is if there is any room for improvement. If its really close to optimal allready then the whole thing is mute. Its one of those diminishing returns things.....
____________
Y2KZX12R
CompetitionCNC.com
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 23, 2008 06:48 AM
Can someone take a clear angled shot of the bear and Muzzy stacks from about a 30 deg. angle? This way we can get a better idea of the profile inside the stack.
Thanks.
____________
Y2KZX12R
CompetitionCNC.com
|
|
|