HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Do Muzzy stacks work?? NEW TOPIC NEW POLL POST REPLY
BEAR


Novice Class
Posts: 70
posted February 19, 2008 08:33 AM        Edited By: BEAR on 19 Feb 2008 08:42
NoX I was just commenting on the other posts and just to inform every body how this happen it was not on you comment, am cool with your statement as I could write a book about it.

http://psychobike.com/cgi-bin/ikonboard.cgi?s=cea17b6b65dd9b53a7abb84af8608ec1;act=ST;f=1;t=53113

http://psychobike.com/cgi-bin/ikonboard.cgi?s=26d2fef60f658a9db0dc971b155f079d;act=ST;f=1;t=52545

Kzscott the stacks looks the part but we lost all gain going shorted not to mention the design or black magic as Doug put it.it did not work for us

thanks
____________
7.56@195 Worldfinals 2004
7.43@ 194 Britol 2008

  Ignore this member    Click here to visit BEAR's homepage. 
VincentHill


Needs a life
Posts: 6520
posted February 19, 2008 08:47 AM        
"MR" Scott! You go to the HEAD Of the class! Your Pictures are the PERFECT Example of the differences in the Velocity stack Bear makes.

That other stack is about 10 MM Shorter than stock. Your picture also is good for my Friend Doug Meyer's Understanding on his statement

quote:
I don't think the aluminum stacks can be materially shorter than stock, as that distance is determined by the distance between the injector body is and the bottom of the frame. THey are basically just about stock length and maybe 3 mm longer. [/qupte]

Last, there are several things I noticed about the Plain aluminum stacks.

#1, they only have 1 "0" RIng seal for the throttle bodies. Even the "0" RIng chain was made so that the "0" Rings had an outter and inner seal.

#2, that the Bell mouth is not a radius curve but more like a 45 degree angle with blended edges.

#3, being 10 MM SHorter would move peak power up the scale and more loss for Mid-Range and without the Curve in the Bellmouth, there is no way the air can remain attached during entry.

(Other than being straight ID, I am not sure that the Stock would not be better!)

____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted February 19, 2008 12:23 PM        
I can only take credit for finding the pics VH, Seth ZX12r UK posted them quite awhile ago from the 200mph.net forum
I love promoting discussion and learning though

____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
posted February 19, 2008 12:25 PM        
quote:
NoX I was just commenting on the other posts and just to inform every body how this happen it was not on you comment, am cool with your statement as I could write a book about it.

http://psychobike.com/cgi-bin/ikonboard.cgi?s=cea17b6b65dd9b53a7abb84af8608ec1;act=ST;f=1;t=53113

http://psychobike.com/cgi-bin/ikonboard.cgi?s=26d2fef60f658a9db0dc971b155f079d;act=ST;f=1;t=52545

Kzscott the stacks looks the part but we lost all gain going shorted not to mention the design or black magic as Doug put it.it did not work for us

thanks

thx Bear, I did not know you tried shorter stacks with bad results before you settled on the best "short" design
(made your links clickable in the quote )
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos

  Ignore this member   
VincentHill


Needs a life
Posts: 6520
posted February 19, 2008 12:30 PM        
KZ, learning is ALWAYS a good thing and in the past, there was more learned here than all of the others sites put together! As DM Said, now all we have to do is hear from Y2K to be complete!

Looks like Bear and I posted within 5 minutes of each other and being 15,000 miles away that is harmony!
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
NOX


Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
posted February 19, 2008 02:07 PM        
My comments were directed at Doug Meyer.
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers

  Ignore this member   
dougmeyer


Needs a job
moderated
Posts: 2713
posted February 20, 2008 01:13 PM        Edited By: dougmeyer on 20 Feb 2008 13:21
Understood NOX, I did take it slightly wrong.
Bear- I agree with your recollection regarding the test set you sent, exactly. I have absolutely no problem with the concept, execution or function of this stuff, only the purported gains.
A comment on that is in order as well.
When I refer to a gain, I mean a "net gain" of area under the curve. NOT just a change in peak power. This is consistent with my characterization of stacks as a"tuning aid".
I assume that any proper race engine build has a correct air inlet to the injectors and that one particular length will benefit peak torque with best power. Any change from that may increase one value and will usuallly decrease the other with the area under the curve remaining constant.

When I said that the stacks "couldn't be shorter than stock" I should have followed that up with the phrase "and still have a correct inlet radius", which I just assumed would be the case.

To the stack comparison, when I looked at them yesterday I didn't have time to respond, but felt that the shortest ones would very likely hurt power everywhere just for that reason. That top edge would cut airflow by a significant percentage, thereby reducing power under the curve.

This inlet lip radius data is VERY mature. It was developed during the 40's and proven and re-fined and re-proven up through th 60's and 70's. It is just a given now. You simply cannot do better than R=.5Dia.

Dan, Just to be clear, I absolutely don't doubt your results, just the validity of the reason.
It's like the big Maxton top speed argument. I absolutely don't know how fast I went or why I was able to do that. All I know is that the measuring device (the clocks) said what the results were. That's always the case, isn't it. Did "so and so" go X mph? Well yes, if that's what the clocks said. Do we trust the clocks? Well, yes, we have to, or we might as well just pack up and go home.

Doug


____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....

  Ignore this member   
Y2KZX12R


Needs a job
CompetitionCNC.com
Posts: 3762
posted February 20, 2008 03:42 PM        
I didnt look in this thread untill just now.... I didnt realize what it was about..... when I get home I'll post some thoughts.....
____________
Y2KZX12R
CompetitionCNC.com

  Ignore this member    Click here to visit Y2KZX12R's homepage. 
oldkawboy


Needs a job
Posts: 2125
posted February 20, 2008 04:15 PM        
Thanks Doug for the follow up replies.......I do appreciate yours and everyone else's input.

I'm just glad to be seeing the 12 get some attention after the release of the ZX14 and new 'Busa!

Dan

  Ignore this member   
Y2KZX12R


Needs a job
CompetitionCNC.com
Posts: 3762
posted February 20, 2008 04:50 PM        Edited By: Y2KZX12R on 20 Feb 2008 16:54
quote:
Whoa there. NINE mph? That would take about a 14% HP increase (25 on 180hp)
at 200 mph. I like Dan's example better, but it's still not a valid test. Using his results you're talking 11 hp.

I would also suggest that if they work in motion they work on the dyno. Remember, ram air doesn't change the airflow into the engine, it only changes the density of the air that's flowing. The power goes up because you are putting more oxygen into the same space (cylinder) each inlet stroke and thus can put in and burn more fuel. This enables continued acceleration (up to the rev lmiter, of course). The continued acceleration allows the rpm to continue to rise (because the point of power/drag balance is moved "up" and you should get a higher top speed.

My point is that if a change is made to the FLOW capability (which you all suggest the stacks do to quite a large degree) then that increase in flow will be the same no matter what the density. Power on the dyno with atmospheric pressure will go up x% when the stacks are installed and the base power with higher density (ram) air will go up by the same % when the stack are added.
I haven't changed my feelingss on this since back when the stacks were under development. That's because the gas laws and laws of physics haven't been re-written as far as I know.
Y2, Whaddaya think? Am I wrong here?
Great to hear from you, Bear. I miss seeing you guys. How's things on the bottom side?



Yea, thats a fair assesment.
____________
Y2KZX12R
CompetitionCNC.com

  Ignore this member    Click here to visit Y2KZX12R's homepage. 
Y2KZX12R


Needs a job
CompetitionCNC.com
Posts: 3762
posted February 20, 2008 04:57 PM        
On the stack length, air flow, diameter issues... Well thats a rather complex issue.

I'm trying to think where to start....
____________
Y2KZX12R
CompetitionCNC.com

  Ignore this member    Click here to visit Y2KZX12R's homepage. 
Y2KZX12R


Needs a job
CompetitionCNC.com
Posts: 3762
posted February 20, 2008 06:03 PM        Edited By: Y2KZX12R on 20 Feb 2008 18:13
I'll keep this very basic because its stupidly complex and dynamic not static.

There are some basic things that happen in the intake and exhaust tracks on a running "otto cycle" engine. but were just talking about the intake side... so that gets rid of half.....

((((I really should have brought home some of my books to explain this better. Not that those books are easier to understand but.... you guys that want to get a good understanding of EVERYTHING thats going on in the engine should buy a book by Gordon P. Blair called Design and Simulation of Four Stroke Engines. Its a must have for anyone who is trying to modify an engine as highly tuned as these modern bike engines. There are a few others I use as reference from time to time but if I was to recomend just one book this would be it. SAE members get a discount on it if you buy it threw SAE. I think its about $85 or so now.))))

Just to keep it simple were going to just talk about what might pertain to the stacks debate.

The first thing is a low pressure wave that the piston creates and it enters the intake tract when the valve opens and travels up the intake tract, depressurizing the port untill it gets to the "end" of the stack, at that point it starts to travel in reverse sine back down to the valve, and this just keeps going back and fourth as the amplitude decreases.....
Then there is the sound wave whick for this discussion is similar and does the same thing.....
The important measurement isnt the length of the stack but the length of the entire intake tract from the valve seat to the top of the lip of the stack. Diameter and convergence and divergence is also a factor but lets just say its a papertowel tube to keep this simple.

The timing of the sonic and pressure waves at the back of the valve are what you are "tuning" when you change the length of the total package. Ideally you want the sonic and pressure waves to hit the back of the valve when its open or opening. They dont travel together or even in the same direction at the same time at all times. some times they do some times they dont, depends on a shit load of other things like rpm air box volume intake trackt length, dia, etc..

Think of it as a traffic light, a column of cars spaced out are going 40 mph and the light turns red. the cars dont all stop where they are. the first car in front stops and then each car stops when it gets to the car in front of them.this builds pressure behind the valve. when the light turns green al the cars dont move at once... the first car starts to move and the next then the next.... this is the port depressurizing.

So, if the cars time the lights right like when driving in the city they hit the lights just right so they dont have to stop. so when the pressure wave arives just before or at IVO then theres a mad rush into the chamber past the valve. This only happens at certain rpms. at other rpms the timing is way off and the pressure wave could be traveling back up the port tothe stack causing lower pressure behind the valve. this hurts power. this is exactly why you see camel humps on dyno charts. the more you use these tuning waves the more you see humps.





There are first second third fourth order waves that can be used. each one is slightly weaker than the one prior. first order waves cant be used. well not unless you want a stack that is 10 feet long. but people have tried it....

So changing the stack length changes the rpm that the pressure and sound waves arrive at an optimal time at the back of the valve. it doesnt change the amplitude. other things change the amplitude like cam timing and rod stroke ratio etc.

you can calculate this timing quite easily. you measure from the valve seat 45 deg angle up the center of the port to the mouth of the stack. once you know that length you can do some math... because you know the speed of sound (or do you? it changes with manifold pressure tempurature, humidity, fuel saturation rate... and other factors).

I cant get into the actual formulas because i dont know them off the top of my head and i use software (I'm lazzy) and i dont know how to type all the charactors on a keyboard to make it make sence.



So the botom line.... changine stack length doesnt change amplitude it changes the timing or the rpm of when the tuning power hits.
So yes it can add a few hp but in reality you moved it you didnt "create" it. and if you move it higher in the rpm band (shorter stack) then you will see more hp on the dyno at that rpm, but you will see less hp where you moved that HP from.
Oh and it moves all the humps up the same amount in the rpm band. But you can also cancel out some of the effect if any of the many other factors disagrees with the move you made.

God, i hope this makes sence to someone. Its so complex. theres thick books on it.

some sites to check out.

http://www.profblairandassociates.com/RET_Articles.html

Poke around this site... theres some very cool software. This is the real deal.
$35,000 per year for a licence to use it. Its based on Balirs works and formulas.
http://www.optimum-power.com/main-products.htm

Sorry for the typos etc.... I just cant proof read this in detail tonight.



____________
Y2KZX12R
CompetitionCNC.com

  Ignore this member    Click here to visit Y2KZX12R's homepage. 
oldkawboy


Needs a job
Posts: 2125
posted February 20, 2008 07:15 PM        
Thanks Jim for taking the time to explain things where "C" students like me can now at least partially understand it.
Even though much of it is over my head, I know more than I did.
Dan



  Ignore this member   
shiphteey


Needs a job
Posts: 2529
posted February 20, 2008 09:18 PM        Edited By: shiphteey on 20 Feb 2008 21:19
How could so many other people put those things on and not get anywhere near the improvement. Hey, I'm beginning to sound like someone else around here......

----Well well well, look who wants to start talking smack again. Please, don't even BEGIN to compare yourself to talented, superlight weight jockeys like Dan's sons. Your credibility has already plummeted worst than Enron.

Whoa there. NINE mph? That would take about a 14% HP increase (25 on 180hp)
at 200 mph. I like Dan's example better, but it's still not a valid test. Using his results you're talking 11 hp.

----Hey Doug, didn't the ZX12 you ran at Maxton dyno 160 stock and 169 with just a Muzzy pipe? Funny how you got SEVEN MPH from only NINE HP. Did you guys bolt on the mirrors and stock pipe and make passes again...you know...so your test would be valid? Who knows, maybe it wasn't the pipe that made you faster...nothing to do with the massive tailwinds you had that day. Reading your posts in this thread is quite amusing. You try and come off like a know it all with heaps of technical explanations about why the stacks can or can't be a gain. Everyone I know (including myself) is happy with the gains they got from their Bear stacks. Like a confused old dinosaur (remember when you thought GPS was just bar room/bar stool talk?) who keeps getting backed into a corner and has to go back and re-re-rephrase what it was you said and meant, you keep showing everyone how out of touch you are swearing if the gains can't be realized on the dyno then there are no significant gains to be made by them. You should take up politics.

A.
____________
Gemini Motorcycles

Topping out everything from Ninja 250s to nitrous ZX-14s.

  Ignore this member   
psycho1122


Pro
Posts: 1608
posted February 20, 2008 10:14 PM        
Ship;

Keep in mind that when adding a compitent pipe to a stock A1 12, it is not just peak power that is gained. My bike also held more power at a higher RPM than stock....like 25 h.p more at redline than stock!! Add the 8% ram effect at 1,000 more RPM (with additional speed included). This is what gains you the extra 7 MPH.

Of course I "only" went 196 mph at around 2,200 ft.
____________
You say PSYCHO like it's a BAD thing!!

  Ignore this member   
Y2KZX12R


Needs a job
CompetitionCNC.com
Posts: 3762
posted February 21, 2008 04:32 AM        
quote:
Keep in mind that when adding a compitent pipe to a stock A1 12, it is not just peak power that is gained. My bike also held more power at a higher RPM than stock....like 25 h.p more at redline than stock!! Add the 8% ram effect at 1,000 more RPM (with additional speed included). This is what gains you the extra 7 MPH.



Exactly.

Its not the gains at peak power that made the top speed higher its the gains at the rev limiter......
____________
Y2KZX12R
CompetitionCNC.com

  Ignore this member    Click here to visit Y2KZX12R's homepage. 
VincentHill


Needs a life
Posts: 6520
posted February 21, 2008 07:53 AM        Edited By: VincentHill on 21 Feb 2008 08:00
SINCE NO ONE SAW WHAT I WROTE I WILL PUT IT IN BOLD AND CAPS!! BEAR MISSPOKE IN THE HEAT OF THE PASSION AND THIS NOT BEING HIS FIRST LANGUAGE!
IT WAS 9 DYMANIC HP (AT TOP SPEED) HE FELT WAS THE INCREASE FOR THE 4 TO 5 MPH GAIN Dan GOT


Does everyone get it now! Also from what I read of Y2K I do not disagree (And how would mer Mortals But if you take a few HP from lower RPM and aAdd it to the Higher RPM (Which is what the short stacks do, then it would seem that the Static HP Gain most of us have seen of 2 to 5 HP came from the increased Dip in the HP Chart we all see. We also know that this increase is magnified by Ram Air at 200 MPH so that 2 to 5 HP Is working like 8 to 12 HP AT 200 MPH Bear has always said that the HP Increase was Small on the Dyno but the stacks worked best the faster you went!


LAST, AGAIN, He dod not mean to say 9 MPH but 9 HP Jease, it is like dealing with republicans some times around here OH, I forgot, a lot of you are! (and a lot of you are not !!
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
dougmeyer


Needs a job
moderated
Posts: 2713
posted February 21, 2008 10:01 AM        
I got it the first time Vincent. But that doesn't change any of the other facts of the discussion regarding the evauation of the parts and why and how they work. Look, this isn't personal
it's just bench racing.
Tyrannosaurus Rex
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....

  Ignore this member   
entropy


Moderator
Posts: 8671
posted February 21, 2008 12:06 PM        Edited By: entropy on 21 Feb 2008 16:04
quote:
Jease, it is like dealing with republicans some times around here OH, I forgot, a lot of you are! (and a lot of you are not !!


Obama Girl is NOT a Republican, but TFA still likes her...








____________
This moderator uses moderation in moderation

  Ignore this member   
Crazi


Parking Attendant
Posts: 10
posted February 21, 2008 01:03 PM        Edited By: Crazi on 21 Feb 2008 13:07
Joined here just to get in on this discussion. I have been learning about engines and airflow for several years now and found a VERY basic calculator that you can play around with to get an idea of what Y2K is explaining.

http://www.bgsoflex.com/intakeln.html

As you adjust the intake tract length, you start to see at what RPMs the harmonics occur. As he stated, most people shoot for a later harmonic and the example used about the cars at traffic lights is excellent! I have always envisioned it as a column of air starting and stopping but will use the car example from now on...

  Ignore this member   
VincentHill


Needs a life
Posts: 6520
posted February 21, 2008 02:30 PM        
DM, SInce you are one of my Hero's I never get that excited about what you do or do not say. I do get excited when an error is made and people do not seem to get the correction. So I moved it from page 30 to page 1.

I am not as smart at you or Y2K in this area, but when I have my bike on the dyno and keep the conditions the same in the print outs and swap stock , Long, Mixed and Short all on the same day and all done within 1 hour time limit and then do it all over again in reverse order and see 3.1 SAE HP Difference between the stock stack and the Short Bear Stack and 2.2 SAE HP between Mixed Stacks and the stock stacks, I have to believe my eyes!

Being in the Credit & Collection Business I have to know people and understand them better than just about everyone. I have met and talked to Dan Millholland many times. In my Opinion, he is a Humble straight talking Honest person that I would trust my life with. When he did the testing, I think he not only got the results he said, but Knowing the results and what he said about the ZX10 stacks, I know he is looking to make it as hard as possible for the results to be better than they really are. If he went 4.03 MPH Faster than he had ever gone before then that is exactly what he did.

Sometimes the Sum of the parts are more than the parts alone! As one person mentioned here, we all know that the stock pipe has a deep drop off after 10,500 right where you need it. We know that you MUST have an after market pipe and correct tuning to pull redline at Maxton. Many of us know that in the afternoon between 2 and 4 pm the track is fairly stable in wind and temp as opposed to the chages in the Morning up to noon time!

SO when he did his testing, the temp and wind was stable and he simply ran faster with the Bear Short stacks than he did without them. To go 4 to 5 MPH faster under the same conditions takes more HP somewhere between 8 to 10 HP. To me, this all matches up with the "Conclusions" we have made. They work better at speed than they do on the dyno!

(for what ever reasons)
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
shane661


Needs a life
Posts: 11494
posted February 21, 2008 02:43 PM        
What Y2k has said matches the results pretty well. Since the hp % increase remains linear with air density, the stacks will produce more net hp at speed with "ram air" effects.

So, the way I see it...Dan is right, Doug is right, Vincent is right, Y2k is right, and Bear is right.

Excellent thread.

Shane

  Ignore this member   
entropy


Moderator
Posts: 8671
posted February 21, 2008 04:03 PM        
Obama girl agrees with Shane!!!!!





quote:
What Y2k has said matches the results pretty well. Since the hp % increase remains linear with air density, the stacks will produce more net hp at speed with "ram air" effects.

So, the way I see it...Dan is right, Doug is right, Vincent is right, Y2k is right, and Bear is right.

Excellent thread.

Shane

____________
This moderator uses moderation in moderation

  Ignore this member   
VincentHill


Needs a life
Posts: 6520
posted February 21, 2008 04:32 PM        
Karl, If she hit him with those Hooters, He would be crushed with a smile still on his face

LIFE on the ZX12R Page is GREAT to see. We all know what a great bike it is and "WE" have developed it to a LOT Better Bike and it is A Beautiful Bike to Boot. Too bad the Beautiful Velocity stacks cannot be seen to appreciate!
____________
Made History @ Daytona and still one fast old man!!

  Ignore this member   
oldkawboy


Needs a job
Posts: 2125
posted February 21, 2008 06:34 PM        
Thanks Vincent for the kind words, I truly appreciate them but more so your friendship.

Now get out there and drum up some votes for Monica Lewinskys boyfriends wife!!!! :-)

Dan

  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX12R ZONE.com > Thread: Do Muzzy stacks work?? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.32210612297058 seconds processing time