osti33
Needs a job
Posts: 2973
|
posted October 13, 2006 05:03 PM
Anyone running a Muzzy C02 air shifter on a 12? I have a question.
Already posted this in the dragbike section but I don't know how many guys check there so I am posting it here too.
When hooking up the two wires from the digi-kill one goes to the power comander and one goes to the injector harness. My question is what wire do you pull from the power commander and from which side of the wiring harness? Male pin side or female pin side?
Thanks.
  
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted October 13, 2006 06:09 PM
Try giving JohnnyCheese a PM. He is real busy and only checks his mail every few days, but I am sure he knows. As he has installed quite a few on 12's.
____________
TFA 200MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted October 13, 2006 06:31 PM
 Edited By: osti33 on 13 Oct 2006 19:31
Thanks Gary. I'll try that. Hows the motor build coming along?
Mine is purring like a kitten. 
Going to the track tomorrow.
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted October 16, 2006 05:06 AM
Glad to hear it's running good. I lost my instructions to the Muzzy airshift / digi kill set up. I can't believe it, as I usually put my stuff in a folder. Most all of my good stuff is together, we'll just be hooking a few more things up on Tues or Thursday and it'll be ready to crank up. Might be ready to ride early next week and a good break-in at the Mile!
____________
TFA 200MPH CLUB MEMBER!
|
dougmeyer
Needs a job
moderated
Posts: 2713
|
posted October 16, 2006 01:08 PM
Osti-
Did you try calling Muzzys? They'll fax you the instructions I'm sure.
|
osti33
Needs a job
Posts: 2973
|
posted October 16, 2006 04:02 PM
Edited By: osti33 on 16 Oct 2006 17:09
quote:
Osti-
Did you try calling Muzzys? They'll fax you the instructions I'm sure.
Doug,
I have the instructions. I hooked it up per the Muzzy instructions (I think) and the bike doesn't start. Unhook it and the bike fires right up. Dave emailed me the troubleshooting guide. I am going to mess with it more later this week now that I have the troubleshooting guide. I just haven't had time to mess with it yet since I got the guide.
Thanks,
Ryan
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted October 16, 2006 05:33 PM
I lost my instructions and just called Muzzy the other day to have some faxed, they seemed a little irritated and said they would not fax them. I would have to send an e-mail to them to get the instructions e-mailed back to me. I have not heard from them yet. I know they have more important clients to deal with, and I do not blame them as it was my fault for looseing the instuctions in the first place...................but I have spent a significant amount of money with them as an individual (Cams, full exhaust, stealth kit, swing arm, shifter and digi kill, to just name a few since I have almost everything muzzy sells for a ZX-12). I might have to hit you up Osti for a copy if they do not pull through for me, or find someone on the boards who might be able to Fax or e-mail a copy. I am more than happy to compensate anyone monetarily for thier time and expense.
____________
TFA 200MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted October 16, 2006 05:41 PM
Let me know. I can fax them to you if you need me to.
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted October 16, 2006 07:25 PM
If it is not too much of an inconvieniance I would be very greatful. As soon as I get to my office tommorrow I'll check my e-mails again and if I have not received anything I'll PM you my fax number and slip you a little money at the Mile.
____________
TFA 200MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted October 16, 2006 08:40 PM
You don't need to pay me anything. I would be happy to fax them to you. Just send me the number. However the color pictures might not come through in color. I'm not sure really... 
Anyways, I would be glad to send them to you. 
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted October 17, 2006 09:23 AM
Thank You Much Ryan.
Muzzys pulled through, Just received instructions today.
____________
TFA 200MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted October 17, 2006 10:04 AM
No problem Gary. Glad you got them.
|
|
|
HOME
NEW TOPIC