Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 09, 2006 05:16 AM
So, 10 more HP, 12 lbs more weight, 13 ft lbs more torque, and its ugly and over hyped for $6,000. What a deal. !!!
And dont expect the power gains from a pipe like the 12r saw.
Expect more like what the Busa saw from a pipe and pc III.
They Killed 3 bikes to produce this one.
I see another marketing mess for Kawi.
Watch that new Busa if it comes out next year. Suzuki has the balls to produce a 190 RWHP bike. They move the bar in much larger jumps like the 99 busa vs. 98 cbrxx and the gsxr 1000 vs R1. Both were much bigger jumps over the compitition. While the 0012r and the zx10r were very small jumps over the Suzukis. And Honda? Well they have no balls but they out sell everone else. so they dont care.
Suzuki is driving the market.
____________
Y2KZX12R
CompetitionCNC.com
   
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 09, 2006 05:18 AM
 Edited By: Y2KZX12R on 9 Feb 2006 05:19
"Suzuki is driving the market"
Did I say that out loud?
____________
Y2KZX12R
CompetitionCNC.com
|
worm~hole
Needs a life
Miles to go before I sleep....
Posts: 10623
|
posted February 09, 2006 05:48 AM
...why yes you did! 
____________
“We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
|
deathpulse
Pro
Posts: 1688
|
posted February 09, 2006 06:14 AM
Group buy on what muzzy product? The 1370 kit? If so... I'm in!! Just let me know a good builder in the North Jersey/NYC area... I'd probably blow my '12 up if I tried to build it...
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted February 09, 2006 07:40 AM
Yea on the 1375 kit.
I bought mine before dec. 31st so I got the 15% off from the sale. It came out to $1,695.
Not a bad price. I priced putting it all together from sources and it was close to the same price. About $100-$200 difference. Muzzy is a sponsor so I gave them the buisness for the few bucks more.
So If theres say 10 board members that want a group buy then they might give everyone the sale price again? Who knows, maybe even more?
Guys from different parts of the country can recomend an installer near them. CT, NY, NJ has a few.
____________
Y2KZX12R
CompetitionCNC.com
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted March 28, 2006 12:03 PM
Any news on a group buy?
____________
Y2KZX12R
CompetitionCNC.com
|
supra5677
Pro
Posts: 1279
|
posted March 28, 2006 01:22 PM
I totally agree Y2K.. I wanted a zx13rr 56.2mm stroke and an 85.5mm bore.. (1300cc)Keep the same bore to stroke ratio and have 185 at the wheel conservately How about a steering damper and put the handle bars up a tad more. The 06 zx10r showing 164 at the wheel is more impressive than the zx14's 169.
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 03, 2006 10:57 AM
once you have made the decision to use a welded stroker crank, you might as well go 60 mm.
____________
Y2KZX12R
CompetitionCNC.com
|
|
|
HOME
NEW TOPIC