Marcos Peguero
Zone Head
Posts: 568
|
posted January 17, 2006 10:39 AM
Power comander wiring
I have 2 bikes, a beautifull zx12r called the beast. and have a PC3r that was put on the bike w/o any conectors by the last owner, so any time I need to change the map I have to get the bike to the tower or use a friends lap top.
I brought a USB for my GSXR1000 (race use) and I see that you can bolt a 9v adaptor to change it in your desk.
I need to help in 2 things, can I cut the wires in the zx12r PC3r and use a big plug?
Is there an adaptor like 9v that I can use in the PC3r?
Thanks
   
|
TRNorBRN6001
Needs a job
Posts: 2021
|
posted January 17, 2006 01:12 PM
Sounds like you want to give the beast a lobotomy. Good Luck.
____________
TFA 200MPH CLUB MEMBER!
|
zx12mark
Pro
Posts: 1654
|
posted January 17, 2006 01:24 PM
did someone cut the connectors on the bikes wire harness. if so find that prick and stick a hot soilder iron up his ass. install new molex connectors if he did so you can by -pass the power commander when trouble shooting. soilder terminals when ever possible. they have to be small to clear the tank..check radio shack on line or store
|
|
|
HOME
NEW TOPIC