Products for the Yamaha MT-102016-07-12 13:27Front Fork Cartridges 25IDS (Independent Damping System) Front fork cartridges are a complete replacement damping system designed to fit into original equipment front forks that do not allow for external compression adjustment. The 25IDS cartridges are designed and manufactured in house to the same standard as all our performance products using the highest grade aluminium which is hard anodised to improve performance and service internals. The 25IDS cartridges have independent compression and rebound damping adjustment and spring preload. 30 clicks independent compression adjustment 30 clicks independent rebound adjustment 18mm preload adjustment • Increased stroke over original equipment • Aircraft grade aluminium Hard anodised and super finished components Wide range of spring rates available Springs must be ordered separately with cartridges. Part No 25IDS: 130-016-270/020 Part No Springs: 36-260-Rate RRP: £699.95 + VAT Springs: £70 + VAT http://www.ktechsuspension.com/products/road?field_prod_cats_nid=7 Read More Also available for the Yamaha MT-10 Shock Absorber DDS ‘Lite’ This Rear shock has been designed as an entry level product for the customer that demands a high level of performance at a competitive price. Sharing all the same high quality components as the DDS ‘Pro’ version the DDS ‘Lite’ performs to the same high level without the hydraulic spring preload adjustment or the ‘unique’ Bypass Valve adjustment that is found on the ‘Pro’ version. This shock can be upgraded to the ‘Pro’ specification at a later date. 4 way adjustable 32 clicks compression adjustment 32 clicks rebound adjustment Manual spring preload adjustment Length adjustment CNC machined components DDS technology Able to upgrade to ‘Pro’ specification Wide range of spring rates available Part No: 245-016-270/020 RRP: £750.00 + VAT http://www.ktechsuspension.com/products/road?field_prod_cats_nid=8 Read More Optional Fork Springs for the Standard Front Forks Front Fork Springs. K-Tech fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1. Cold coiled Heat treated Tempered Shot peened Ground ends Polished for reduced friction and smoother performance Part number etched Part No: 38-220-90/95/10.0/10.5/11.0 RRP: £70.00 + VAT (PAIR) http://www.ktechsuspension.com/products/road?field_prod_cats_nid=7 Read More Optional Rate Springs For The Standard Shock Shock Absorber Springs K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated Tempered Shot peened Ground ends Zinc phosphate coated Epoxy powder coated Part number printed Part No: 55-160-90/95/100 RRP: £71.00 + VAT http://www.ktechsuspension.com/products/road?field_prod_cats_nid=8 Read More Source: K-Tech Suspension Click here to visit our forums to discuss this story |
Headlines
|