Brembo MotoGP Brake Facts for Red Bull Grand Prix of the Americas

2016-04-10 15:21
From April 8-10, the Circuit of The Americas (COTA) in Austin, Texas, will host the third round of the 2016 MotoGP World Championship. Completed at the end of 2012, the track was designed by the German architect Hermann Tilke.

The Austin circuit falls into the category of medium difficulty for the braking systems. One of the signature sections of the track is the impressive incline at the end of the front straightaway into Turn 1. The elevation gain between the lowest and highest points on the track measures 41 meters in total (134 feet), and it’s easy to imagine the consequences for the riders that get the braking wrong on the descent.

According to Brembo technicians, COTA falls into the category of medium difficulty for the brakes. On a scale of one to five, it earned three on the difficulty index, which is identical to eight other tracks, including Losail (Qatar) and Termas de Rio Hondo (Argentina), where the first two races of the season were held.

​Brake use during the GP
Even though the average speed per lap is one of the lowest in the championship at 158 kph (98 mph), the time spent braking is not terribly significant: 23 percent of the overall duration of the race. It is easy to explain why: COTA contains three first-gear turns and long stretches with frequent changes in direction, where the brakes aren't used much. This is another reason why the Texas circuit stands out for having one of the lowest average deceleration rates in the Championship: just 1.15 g.

The most challenging stops
Of the eight braking sections at COTA, three are classified as difficult on the brakes, two are medium; the remaining three have a light incidence on the braking systems. It is worth noting that on the first braking (Turn 1), the bikes go from 311 kph to 60 kph (193 mph to 37 mph) in 206 meters (225 yards), applying a load of 11 kg (24 lbs) on the brake lever. As for the reduction in speed and brake space, Turn 12 has the best; the bikes arrive going 337 kph (209 mph) and have to go down to 70 kph (43 mph). To do so, the brakes are used for almost six seconds. Both of these braking sections present a deceleration of 1.6 g.

Turn 20, the last on the track, has a medium level of difficulty, on the other hand. The riders use the brakes for about three-and-a-half seconds, applying a load of six kg (3.73 lbs) on the lever.

The least challenging braking section on the circuit is Turn 9, which requires a drop in speed from 148 to 103 kph (92 mph to 64 mph) in 79 meters (86 yards).

Brembo Victories
At the GP of the Americas, Brembo brakes monopolized the podium in all three of the contended editions. The winner was Marc Marquez, with Honda, each time.

About Brembo SpA
Brembo SpA is the world leader and acknowledged innovator of disc brake technology for automotive vehicles. Brembo supplies high performance brake systems for the most important manufacturers of cars, commercial vehicles and motorbikes worldwide, as well as clutches and other components for racing. Brembo is also a leader in the racing sector and has won more than 300 championships. Today the company operates in 16 countries on 3 continents, with 24 production and business sites, and a pool of about 7.800 employees, about 10% of whom are engineers and product specialists active in the R&D. 2015 turnover is € 2,073.2 million (12.31.2015). Brembo is the owner of the Brembo, Breco, AP, Bybre, and Marchesini brands and operates through the AP Racing brand.

Source: Brembo North America, Inc.

Click here to visit our forums to discuss this story

Headlines