HRC UNVEIL NEW MotoGP PRODUCTION RACER

2013-11-07 13:51
Honda unveiled its RCV1000R production racer at
Valencia this afternoon, just four days before
the machine makes its European track debut during
Monday’s first offseason tests.

The objective of the RCV1000R – based closely on
the RC213V that currently leads both the riders
and constructors’ World Championships – is to
give private riders and teams a fighting chance in MotoGP.

The RCV1000R will be made in limited quantity and
sold to private teams for use in next year’s
World Championship. Already down to ride the bike
are Honda’s former MotoGP World Champion Nicky
Hayden, Moto2 race winner Scott Redding and Czech privateer Karel Abraham.

The 999.5cc RCV1000R looks and sounds like the
RC213V, using the same 90 degree V4 configuration
and firing order as the factory bike, as well as
the same chassis geometry. However, there are
some crucial differences in technical
specification, most significantly the bike uses
conventional steel valve springs instead of the
factory bike’s pneumatic valve springs and a
conventional gearbox instead of the factory
bike’s ‘seamless shift’ gearbox. Both these
technologies were deemed inappropriate for
private teams who go racing on tight budgets.

“This project is very important to Honda,” said
Shuhei Nakamoto, Executive Vice President of the
Honda Racing Corporation. “The gap between the
factory bikes and the current CRT machines [which
use engines from street superbikes] was a little
too big, so this is the way we like to help
private teams – this is the main concept. The
target was to produce a reasonably competitive machine for a reasonable price.”

Like other so-called Open machines (ie
non-factory), the RCV1000R runs control
electronics hardware and software – by Magneti
Marelli – instead of factory-spec electronics.

The bike has already been tested by Honda’s 2011
MotoGP World Champion Casey Stoner, who was
pleasantly surprised by its impressive
performance. At Motegi in Japan, the Australian
was just 0.3 seconds slower on the RCV1000R than
on an RC213V, using the same tyres. Once the
machine had been fitted with a softer rear slick,
only available to Open bike riders, the gap shrunk to just 0.17 seconds.

This is not the first time that Honda has
supported the premier class with production
machinery designed to help riders compete at the
highest level in World Championship races.

Throughout the 1980s the factory’s three-cylinder
RS500 production racer – based on the
title-winning NS500 – was a mainstay of 500 GP
grids. And in the late 1990s the company’s
NSR500V twin once again gave private teams a
chance to compete. One of these machines was the
last privateer bike to score a premier-class
podium, when Alex Barros finished third at the
1997 British GP. That year Barros bettered
several factory machines in the final World Championship standings.

Honda has also enjoyed a close relationship with
private riders and teams in the smaller Grand
Prix classes, marketing four-stroke machinery
during the 1960s and two-stroke 250s and 125s
from the 1980s onwards. Honda’s current NS250F
four-stroke – built specifically to the
requirements of privateers – accounts for almost
half the grid in the Moto3 World Championship.

Source: Honda Pro Image

Click here to visit our forums to discuss this story

Headlines