Dani Pedrosa (Repsol Honda RC213V) moved to the
top of the lap times during the middle day of the
three-day Sepang 2 test session. Also on fine
form in the tropical heat was Alvaro Bautista
(GO&FUN Honda Gresini RC213V) who was third
quickest after leading the way yesterday.
Former 250 and 125 World Champion Pedrosa, who
suffered yesterday due to lack of sleep brought
on by jetlag, was in flying form this afternoon.
After dedicating himself to working on engine
maps and front-end set-up, he upped his pace to
ride the fastest lap at the end of the day as
track temperatures cooled somewhat. Tomorrow he
will focus on rear set-up and race runs.
Pedrosa’s team-mate and reigning MotoGP World
Champion Marc Marquez (Repsol Honda RC213V) is
absent from these tests after breaking his right
fibula bone during a training accident last week.
The youngster will also miss next week’s Phillip
Island test and won’t be allowed to ride at the
subsequent non-factory tests at Qatar. The next
time he will ride his Repsol Honda RC213V will be
in FP1 at the Qatar GP on March 20.
Bautista continued the excellent work he began
yesterday, further honing the set-up of his
RCV213V, which uses Showa suspension and Nissin
brakes, unlike the other factory RCVs that run
Öhlins and Brembo. The Spaniard ran an impressive
race-distance run in the afternoon, improving his
best lap time at the same time.
Stefan Bradl (LCR Honda RC213V) ended day two an
excellent sixth fastest, taking advantage of the
slightly improved track condition to focus on
evaluating the hard-compound Bridgestone rear and improving braking stability.
Nicky Hayden (Drive M7 Aspar Honda RCV1000R) had
another busy day, working mostly on suspension
settings and general set-up. Like most riders, he
will bid to do a full-race run tomorrow.
Hiroshi Aoyama (Drive M7 Aspar Honda RCV1000R)
ended the day three places behind his team-mate
and just behind Andrea Iannone, riding a factory
specification Ducati. The former 250 World
Champion was unable to ride the way he wants to,
due to the slippery track surface, but he
nonetheless did useful work on suspension set-up
to improve machine balance and stability.
MotoGP rookie Scott Redding (GO&FUN Honda Gresini
RCV1000R) also had a promising day. The Briton
tried different suspension settings and also
adjusted his riding position on his RCV1000R.
Tomorrow he will aim to improve braking performance.
Karel Abraham (Cardion AB Honda RCV1000R) had
another difficult outing, still troubled by the
shoulder injury he sustained last year, despite
undergoing intensive physiotherapy over the last few weeks.
Honda rider quotes
Dani Pedrosa (Repsol Honda): 1st, 2m 00.039s
“Things went well this afternoon, even though
this morning we were still having some issues and
I wasn’t able to ride comfortably. I had to stop
early in order to make some big changes to the
bike, and when we restarted after lunch I felt
more comfortable and put in better laps. We
focused on the front end and were able to find a
good set-up. Tomorrow we will focus on making
progress with the rear, because we have to get
the new tyre working better and increase grip. If
all goes well, then perhaps tomorrow we will be able to do a race simulation.”
Alvaro Bautista (GO&FUN Honda Gresini): 3rd, 2m 00.500s
“Today we completed a good race simulation:
having done it in the afternoon, the track was
not in the best condition, but all in all we are
pleased with how it went. We have gathered
important data and we have seen an improvement
with regard to the durability of the rear tyre.
Compared to what happened in last year’s race,
especially thanks to the new Showa rear
suspension items, the bike moves less when the
tyre starts to wear out. The front tyre instead
starts to slip a little bit after about 15 laps,
and this leads to lose the ideal line, therefore
we will work to improve this aspect. At the end
of the day I also set a very good lap time, the
best ever for me on this track, but I’m
especially happy for the good work we were able
to do. Tomorrow we will continue to work on
chassis set-up and refining the electronics, but
we are definitely in a good shape.”
Stefan Bradl (LCR Honda): 6th, 2m 00.902s
“Today the track conditions were somewhat better
than yesterday but still not comparable with
Sepang first test session. It’s tough riding the
bike with this heat; however today we kept
working on the race-long performance and we are
quite happy about our pace. Throughout the day we
made several adjustments trying to improve
braking stability and, at the end of the day, we
gained some good results. Tomorrow we will put
all these things together and we will go for a faster lap time”.
Nicky Hayden (Drive M7 Aspar Honda): 14th, 2m 02.008s
“The track is still pretty dirty but the
conditions today were slightly better than
yesterday when it was particularly slippery,
especially in turn one. It was still really hot
but we were able to get plenty of work done,
mainly on the suspension and general set-up. We
also worked a bit on the gearbox although at the
moment there is not much for us to try in this
area and it is quite time-consuming work. The
feeling today was pretty good, we improved the
lap times and hopefully we can continue to do
that tomorrow through a combination of improving
the bike and also my riding. We have a couple of
things still to try tomorrow as part of a long run."
Scott Redding (GO&FUN Honda Gresini): 17th, 2m 02.652s
“I’m happy with today’s outcome: we worked a lot
on braking stability and now the situation is
better than yesterday, therefore I was able to
improve my lap times. Tomorrow we will continue
to work in this direction, trying other chassis
geometry solutions and I hope we can make a
further step ahead. In the last day we will also
try to refine the electronics.”
Hiroshi Aoyama (Drive M7 Aspar Honda): 18th, 2m 02.786s
“We continued adjusting the suspension today and
managed to improve the feeling quite a lot. This
wasn’t really reflected in the lap time but we
are satisfied with the work we did today. The
track conditions were still quite bad but we
managed to get a lot of work done and now we have
a lot of data to go through and see where we can
improve. Maybe we are losing too much time in the
fast corners because I don’t have the confidence
to get on the gas so tomorrow we will need to try
and put that right. At the moment though we are
concentrating on getting the bike turning better
so we can pick up the corner speed.”
Karel Abraham (Cardion AB Honda RCV1000R): 22nd, 2m 05.188s
“The situation with my shoulder isn’t so good. At
least now I can tuck in the arm on the straights,
whereas I couldn’t even do that before. The
problems are in braking, cornering, exits and
changing direction – not so much the pain but a real lack of strength.”