Alpinestars is launching its NEW BIONIC NECK SUPPORT and FLUID KNEE BRACE to the market.
Designed for all forms of off-road riding, the BNS TECH CARBON is a completely re-engineered, advanced neck protector that helps prevent the risk of damage to the neck, and is constructed from an advanced carbon fiber polymer compound that is extremely lightweight and optimized for structural strength.
The highly customizable FLUID TECH CARBON KNEE BRACE is a fully CE-Certified brace incorporating an innovative, reduced material design construction for comfort, fit and superb ergonomic performance in all off-road riding situations.
- FLUID TECH CARBON Knee Brace: (suggested retail price – $349.95 for each individual knee - Left and Right: per item)
- FLUID PRO Knee Brace: (suggested retail price – $399.95 per set - Left and Right: the set)
BIONIC NECK SUPPORT (BNS) PRO
The BNS Pro is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS Pro functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Primarily for use in motocross and off-road riding this protection device offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system. Thanks to its advanced material construction the BNS Pro is lightweight and strong.
Advanced, high-performance fiberglass polymer compound
- Structural integrity and frame strength against heavy impact energies during crash
- Lightweight performance and comfort while riding.
- Resilience to low temperatures, below 0°C.
A highly customizable, secure and personalized fit
- SAS (Size Adapter System) for a versatile fitment in size ranges XS-M and L-XL.
- Lycra-laminated foam padding kits: adaptable and interchangeable EVA foam pads allow compatibility with body protection systems.
- Strap System: Light strap worn over or under the jersey.
Bio-organic engineering design for superb ergonomics
- Rear stabilizer promotes PFR (Progressive Force Relief) and dissipate extreme energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key for convenient dismantling.
- Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet sizes and raised chest to avoid hyper-flexion injuries.
- Innovative quick-release locking closure system for rapid and efficient fitting/removal offers highly secure and convenient attachment.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.
BIONIC NECK SUPPORT (BNS) TECH CARBON
Engineered to help prevent neck injury and minimize the risk of collateral damage, the Bionic Neck Support (BNS) Tech Carbon is constructed from an advanced carbon polymer for optimized frame strength and lightweight performance. The BNS Tech Carbon functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring a host of award-winning design innovations, such as a quick release locking system and a rear stabilizer offering critical protection to the spine, the BNS Tech affords a highly customizable, secure and comfortable fit for all forms of off-road riding.
Advanced, high-performance carbon polymer compound
- Structural integrity and frame strength against heavy impact energies during crash.
- Ultra-lightweight performance and comfort while riding.
- Resilience to low temperatures, below 0°C.
A highly customizable, secure and personalized fit
- SAS (size adapter system) for a versatile fitment in size ranges XS-M and L-XL.
- Lycra-laminated foam padding kits: adaptable and interchangeable EVA foam pads allow which also aid compatibility with other body protection systems.
- Strap System: Allows a small, light strap worn over or under the jersey.
Bio-organic engineering design for superb ergonomics
- Rear stabilizer promotes PFR (Progressive Force Relief) and dissipates extreme energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via a pivot key for convenient dismantling.
- Frame construction promotes improved contact with helmet during impact and instantaneous load channeling – including rear support edge that fits closer to the body, extra width to account for different helmet sizes and raised chest to avoid hyper-flexion injuries.
- Innovative quick-release locking closure system for rapid and efficient fitting/removal offers highly secure and convenient attachment.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.
FLUID PRO KNEE BRACE
Designed for the stresses of off-road riding, the Fluid Pro is a versatile, fully CE certified knee brace that provides support and helps protect from hyperextension in the event of a crash. Lightweight, ventilated and highly customizable the Fluid Pro offers a personalized and secure fit.
FLUID PRO KEY FEATURES:
- CE Certified to EN 1621-1 (K type B) and constructed from an advanced fiberglass compound for light, strong frame that retains strength and performance even in extreme temperatures.
- Incorporating DEFT - Dynamic ErgoFit Tech - an innovative, reduced material design construction for improved weight-saving and excellent ergonomic performance.
- Highly ventilated, channeled padding and mesh zones for superb airflow cooling.
- Customizable, versatile and secure fit with its size adapter system (size ranges S-M-L and XL-XXL).
- Fine-tuning of personalized fitment offered by knee width adjustment spacers (1mm, 2mm and 3mm, both sides), supplied as standard.
- Brace comes with anatomically optimized ErgoFit spacer kits for improved directional articulation performance and position stability.
- Innovative knee pivot system incorporates tool-free poly-centric hinge system for fast, easily exchangeable extension stops (0, 5, 10, 15 and 20 degrees) to prevent hyperextension injuries.
- Ergonomically sculptured and ventilated knee cup system constructed from semi-rigid TPU for durability, backed by shock-absorbing PU memory foam for comfort.
- Correct positioning of knee cup is secured accurately with top and bottom elastic straps, allowing multi-directional freedom of movement, avoiding pressure points on the patella.
- Dual strap system promotes secure fitment of brace in all riding positions and includes combined buckle and Velcro® closures for rapid and easy mounting.
FLUID TECH CARBON KNEE BRACE
The Fluid Tech helps reduce the risk and severity of knee injury by preventing excessive hypertension of the knee in the event of an accident. Thanks to innovative engineering the Fluid Tech is ultra-lightweight and offers a highly customizable and secure fit, while affording improved directional movement of the knee articulation while riding.
CONSTRUCTION
- CE Certified to EN 1621-1 (K type B), and is extremely lightweight, strong and is constructed from an advanced, high-performance carbon polymer compound that retains its performance attributes extreme warm or cold weather climates.
- Incorporates DEFT - Dynamic ErgoFit Tech - an innovative, reduced material design construction for improved weight-saving and excellent ergonomic performance.
PROTECTION
- Innovative knee pivot system incorporates tool-free poly-centric hinge system for fast, easily exchangeable extension stops (0, 5, 10, 15 and 20 degrees) to prevent hyperextension injuries.
- Ergonomically sculptured and ventilated knee cup system constructed from semi-rigid TPU for durability, backed by shock-absorbing PU memory foam for comfort.
- Highly ventilated, channeled padding and mesh zones for superb airflow cooling.
CUSTOMIZATION
- Customizable, versatile and secure fit afforded by size adapter system (size ranges S-M-L and XL-XXL).
- Fine-tuning of personalized fitment offered by knee width adjustment spacers (1mm, 2mm and 3mm, both sides), supplied as standard.
- The Fluid Tech comes with anatomically optimized ErgoFit spacer kits for improved directional articulation performance and position stability.
- Correct positioning of knee cup is secured accurately with top and bottom elastic straps, allowing multi-directional freedom of movement, avoiding pressure points on the patella.
- Dual strap system promotes secure fitment of brace in all riding positions and includes combined buckle and Velcro® closures for rapid and easy mounting.