fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 22, 2007 03:45 PM
Callin' Stalwart...PING!!! PING!!! PING!!!
Stalwart, this is a superb mod ole' buddy, one that HAS to be done. especially if you're 2-up. You know me; you won't regret this mod for a sec. It'll only bring tears of joy to you! 
You won't believe the difference in the low end. I have a map for you so you don't have to Dyno the bike either. The bike pulls like a beast now, just as I predicted it would.
Area P slipon (2" core)
Flies out
PC3
Map (I have it for you)
The flies out mod needs to be done with a quality, (Minimum length) 8" #2 Philips (sharp point, not flat end). I had some issues on this bike the 1st time around; use a heat gun or soldering iron to be sure. Different screws from the ZX14 and much softer material. Bike pulls hard everywhere now, real hard!
____________
FYYFF!!!
   
|
Stalwart
Needs a job
Posts: 3360
|
posted October 22, 2007 04:43 PM
Thanks Steve, I'll order up the stuff when Jane isn't looking! 
Now I just need to find a Windoze PeeCee to load the map . . . perhaps the 24" Intel iMac I just bought my father-in-law will work, it's running Parallels and he has XP on it. I'm still running an old dual-2.5 GHz G5. 
____________
Stuart
________________________________
Ridin' the Trump train.
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 22, 2007 05:20 PM
LOL -- just do it man. You'll thank me and the others who already have. Don't forget to set the TPS before you load! I'll send you maps when you need 'em.
____________
FYYFF!!!
|
Stalwart
Needs a job
Posts: 3360
|
posted October 22, 2007 05:47 PM
I'll have to load the map off the bike using the 9V battery method, I don't have a Windoze laptop available. 
____________
Stuart
________________________________
Ridin' the Trump train.
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 22, 2007 05:51 PM
You can't set the TPS that way...but I can give you the values and that should work, unless your throttle is off, compared to mine, but mine is the same as my ZX14.
____________
FYYFF!!!
|
08CC14
Expert Class
Posts: 109
|
posted October 25, 2007 06:59 PM
You guys should host a tech shop class sometime/somewhere so those of us who aren't quite so mechanically inclined can come in and have you show us how to do the fly removal. I'd be glad to buy the beer! (and any required parts of course)
____________
'08 ABS Concours 14
'97 YZF600R
'00 ZX6e (rideable but needs paint)
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 26, 2007 03:32 AM
Ya ok -- come to Montreal, QC. Not only will I show you how, but I'll buy the beer fer ya! Seriously though, this is fairly easy; if you can hold a screwdriver, you can do this.
____________
FYYFF!!!
|
B1200
Parking Attendant
Posts: 8
|
posted October 26, 2007 11:15 PM
quote:
Ya ok -- come to Montreal, QC. Not only will I show you how, but I'll buy the beer fer ya! Seriously though, this is fairly easy; if you can hold a screwdriver, you can do this.
Been to Montreal, back in '67 for the World Expo. Beautiful place.
I'm not so afraid of the screwdriver part, it's the laptop part that worries me.
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 27, 2007 02:22 AM
That's even easier than the screwdriver part...you can't really make a mistake with that; they make it very easy to do.
____________
FYYFF!!!
|
nabrxx
Needs a job
Posts: 2853
|
posted November 12, 2007 01:31 PM
fba...Ive been reading up on pc3s. Is your map the one the pc comes with?. Just plug the pc in with flies out.....thats it?...besides a slipon or a pipe?....still havent got the ride yet...work issues...should have it by the end of the week....its gonna rain here for a couple of days anyway...later.
____________
What we don't understand, we can
make mean anything...
src="http://www.bikeland.org/board/i
mages/smilies/smile.gif" border=0>
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted November 12, 2007 02:08 PM
No, I have an Area P exhaust and I have the exact map that was made for that exhaust (flies out). PM me with your addy and I'll send it to ya! If you're gonna do it yourself and remove the flies -- read my posts on this and get yourself a good strong 8" shaft #2 philips screwdriver with a very sharp tip, a heat gun and a hammer, to make things easier.
____________
FYYFF!!!
|
nabrxx
Needs a job
Posts: 2853
|
posted November 12, 2007 05:10 PM
I plan on breaking it in first, but Im bringing myself up to speed to perform this mod..I want it to go smoothly. Talk soon.
____________
What we don't understand, we can
make mean anything...
src="http://www.bikeland.org/board/i
mages/smilies/smile.gif" border=0>
|
Stalwart
Needs a job
Posts: 3360
|
posted November 12, 2007 05:39 PM
Pulling the flies should allow you to put more pressure on the rings and actually make breaking-in faster and better.
____________
Stuart
________________________________
Ridin' the Trump train.
|
|
|
HOME
NEW TOPIC