HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > CLASSIFIEDS > Thread: zx14 everything performance NEW TOPIC POST REPLY
hobster


Parking Attendant
Posts: 9
posted July 31, 2012 12:49 PM        
are the 48mm throttles still in stock?
  Ignore this member   
hobster


Parking Attendant
Posts: 9
posted August 12, 2012 09:17 AM        
quote:
quote:
Got the cut seat and litz shock yesterday, everything as described!!! These cut seats are SWEET!!! thanks.


thanks again! enjoy
hey compton,, 47mm throttles still available?

  Ignore this member   
hobster


Parking Attendant
Posts: 9
posted August 12, 2012 09:20 AM        
47mm throttles still in stock?
  Ignore this member   
hobster


Parking Attendant
Posts: 9
posted August 12, 2012 09:33 AM        
throttle bodys

quote:
quote:
Got the cut seat and litz shock yesterday, everything as described!!! These cut seats are SWEET!!! thanks.


thanks again! enjoy
hey comton,,,are the 47mm throttles still in stock?

  Ignore this member   
quick350


Novice Class
Posts: 38
posted August 23, 2012 03:26 AM        
any chance u still have a seat? pics? i know thread is old..
  Ignore this member   
joseph702


Zone Head
Posts: 598
posted October 13, 2012 06:31 PM        
motor still for sale?

  Ignore this member   
ericwms12


Parking Attendant
Eric
Posts: 9
posted October 13, 2012 07:06 PM        
oil pan??
____________
eric

  Ignore this member   
osr


Expert Class
Posts: 459
posted October 15, 2012 11:58 AM        
old thread - ericwms12- i have cut 14 pan on the shelf ready to go if needed - osrbikes@gmail.com
  Ignore this member   
lownslow12


Parking Attendant
Posts: 8
posted October 29, 2012 06:53 PM        
Im looking for full front end for swap on an A1 zx12 forks brakes bars levers etc or whatever you still have email me jakerossthomas@gmail.com
  Ignore this member   
Lsantana954


Expert Class
Posts: 356
posted November 07, 2012 02:33 PM        
can you email me pix of the swing arm, LSantana954@gmail.com
____________
'12 Gully Blue ZX14
-PCV/Guhl ECU/Blue CT Meg/<0 Alyson Oil/+8 Evil Arm/+1 Rear Sprocket
'07 Acura TL-S
'87 Buick Grand National

  Ignore this member   
09zx14ml


Parking Attendant
Posts: 15
posted November 22, 2012 12:21 PM        
i am very interested in the brook pipe. would you email me picture to motorcyclenut52@yahoo.com
  Ignore this member   
Kawirider1352


Parking Attendant
Posts: 15
posted November 24, 2012 09:40 AM        
Im intrested in th throttle bodies,do u still hav them
____________
JRS

  Ignore this member   
JZX


Zone Head
Posts: 943
posted November 27, 2012 12:17 PM        
I have a set of stock 2010 TB's- injectors included
____________
06 ZX14 65"

Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'


  Ignore this member   
Mosley_Racing


Parking Attendant
Posts: 1
posted November 30, 2012 06:11 PM        
Do u still have the motor? If so I need a few more details. Please inbox or call me 309 550 1203
Thanks

  Ignore this member   
09zx14ml


Parking Attendant
Posts: 15
posted December 01, 2012 06:49 AM        
i am interested in the tiwinder. please send me pictures. motorcyclenut52@yahoo.com
  Ignore this member   
ZX19R


Parking Attendant
Posts: 18
posted December 04, 2012 05:14 PM        
I guess the TBs are long gone?
____________
Vote no for Nuke industry they are all C.unts
already dooming our kids and grandkids DNA

  Ignore this member   
Kawirider1352


Parking Attendant
Posts: 15
posted December 11, 2012 03:28 PM        
Do U still hav th throttle bodies?
____________
JRS

  Ignore this member   
Kawirider1352


Parking Attendant
Posts: 15
posted December 23, 2012 06:19 PM        
Can U send me pics of th 48mm throttle bodies? jsudderthjr@yahoo.com
____________
JRS

  Ignore this member   
pancho14


Parking Attendant
Posts: 21
posted December 24, 2012 10:41 AM        
How bug are the cams?/
  Ignore this member   
Superman T


Pro
Posts: 1831
posted December 28, 2012 09:01 AM        
Compton, could you please send me pics of your Adams Swing Arm? Does it have the nos built in?
  Ignore this member   
Kawirider1352


Parking Attendant
Posts: 15
posted January 13, 2013 08:43 AM        
do u still hav th throttle bodies and if so could u send pics, jsudderthjr@yahoo.com
____________
JRS

  Ignore this member   
Abracadabra


Parking Attendant
Posts: 2
posted August 01, 2014 04:20 PM        
Tiwinder

quote:
06/07 parts all used, in great shape. zero street miles

Power Commander + Hub + Ignition Module = 350.00
Schnitz PNC-3000 nitrous controller = 375.00
Muzzys Bonneville pro 125.00
NOS Mini 2 stage progressive controller 175.00
Modified Adams Spray Bar with 8 nozzles for 2 stages, anodized black + NX solenoid, adams solenoid, braided and soft lines, with 16 and 25 jets. good for 150hp 350.00
zx14 cut seat by adams = 125.00
zx14 cut seat by tobin, more of a riding seat = 160.00
zx14 catalyst race seat, bad shape, been repaired 60.00
Zx14 no name ebay fiberglass race seat 50.00
Adams / Litz Shock re-valved and shortern with new spring for 65" 180lb rider 300.00
Adams Straight link powder coated black 140.00
Smoked Taillight by me with Smoked turn signals by Clear Alternatives 60.00
Custom Co2 / air shifter . Mr Turbo under rear set bracket, shorter ram, braided lines, carolina cycle high pressure regulator, solenoid, fits a small 3.5oz bottle in trunk. 275.00
Brocks Performance TiWinder BLUE - 1200.00
Brocks / BST wheels 16" front 17" rear. sprockets, galfer rear rotor, yana shinki front rotors, tires included 3300.00
2x4 1510cc motor. Marine Crank 4+, carrillo rods, Adams/JE pistons, fast by gast trans, brocks shift shafts, adams case mods, Comp CNC oil gear, muzzys oil plate, new bearings, adams 1.5" pan anodized black, 4000.00 = fresh, only has break in / heat cycles
Zx14 cylinder head, ported with Biggest WEB cams you can fit in the stock buckets 1500.00
48mm Throttle Bodies 300.00
Complete Fuel System one off custom, 08 housing, walbro internal pump, all -6 braided lines, aeromotive regulator, and my billet rail. quiet, and flows good. 400.00
keyset 100.00
Gauges one cluster with 13xx miles 300.00 and another with 36xx miles 280.00
07 Candy Plasma Blue body, great shape with also a 08 zx10r front fender and brackets 850.00
Rock Solid Manufacturing Kawasaki ZX14 GSSF Series Clutch, brand new 1600.00
adams swing arm, very clean with black anodized axle adjusters and bottle holder, 64-68" 750.00
billet quick access clutch cover, black and machine by adams. just like the one on there prostreet bike 400.00

I have more, but those are the big things for now. I'm in chicago. paypal please add 3%

  Ignore this member   
Abracadabra


Parking Attendant
Posts: 2
posted August 01, 2014 04:21 PM        
Is the tiwinder still available

quote:
06/07 parts all used, in great shape. zero street miles

Power Commander + Hub + Ignition Module = 350.00
Schnitz PNC-3000 nitrous controller = 375.00
Muzzys Bonneville pro 125.00
NOS Mini 2 stage progressive controller 175.00
Modified Adams Spray Bar with 8 nozzles for 2 stages, anodized black + NX solenoid, adams solenoid, braided and soft lines, with 16 and 25 jets. good for 150hp 350.00
zx14 cut seat by adams = 125.00
zx14 cut seat by tobin, more of a riding seat = 160.00
zx14 catalyst race seat, bad shape, been repaired 60.00
Zx14 no name ebay fiberglass race seat 50.00
Adams / Litz Shock re-valved and shortern with new spring for 65" 180lb rider 300.00
Adams Straight link powder coated black 140.00
Smoked Taillight by me with Smoked turn signals by Clear Alternatives 60.00
Custom Co2 / air shifter . Mr Turbo under rear set bracket, shorter ram, braided lines, carolina cycle high pressure regulator, solenoid, fits a small 3.5oz bottle in trunk. 275.00
Brocks Performance TiWinder BLUE - 1200.00
Brocks / BST wheels 16" front 17" rear. sprockets, galfer rear rotor, yana shinki front rotors, tires included 3300.00
2x4 1510cc motor. Marine Crank 4+, carrillo rods, Adams/JE pistons, fast by gast trans, brocks shift shafts, adams case mods, Comp CNC oil gear, muzzys oil plate, new bearings, adams 1.5" pan anodized black, 4000.00 = fresh, only has break in / heat cycles
Zx14 cylinder head, ported with Biggest WEB cams you can fit in the stock buckets 1500.00
48mm Throttle Bodies 300.00
Complete Fuel System one off custom, 08 housing, walbro internal pump, all -6 braided lines, aeromotive regulator, and my billet rail. quiet, and flows good. 400.00
keyset 100.00
Gauges one cluster with 13xx miles 300.00 and another with 36xx miles 280.00
07 Candy Plasma Blue body, great shape with also a 08 zx10r front fender and brackets 850.00
Rock Solid Manufacturing Kawasaki ZX14 GSSF Series Clutch, brand new 1600.00
adams swing arm, very clean with black anodized axle adjusters and bottle holder, 64-68" 750.00
billet quick access clutch cover, black and machine by adams. just like the one on there prostreet bike 400.00

I have more, but those are the big things for now. I'm in chicago. paypal please add 3%

  Ignore this member   
06redzx14


Pro
Posts: 1022
posted August 01, 2014 07:22 PM        
This thread is 2 years old
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot

  Ignore this member   
Master


Expert Class
If it ain't fast it aint me
Posts: 270
posted August 13, 2014 06:47 AM        
Id like the kick stand 858 568 6152
  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > CLASSIFIEDS > Thread: zx14 everything performance NEW TOPIC POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2025 Bikeland Media
Please refer to our terms of service for further information
0.21676993370056 seconds processing time