HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > CLASSIFIEDS > Thread: zx14 everything performance NEW TOPIC POST REPLY
Compton


Zone Head
Posts: 969
posted February 11, 2012 07:37 PM        
Muzzys Bonneville pro 125.00

Modified Adams Spray Bar with 8 nozzles for 2 stages, anodized black + NX solenoid, adams solenoid, braided and soft lines, with 16 and 25 jets. good for 150hp 350.00

zx14 catalyst race seat, bad shape, been repaired 60.00

Zx14 no name ebay fiberglass race seat 50.00

Adams / Litz Shock re-valved and shortern with new spring for 65" 180lb rider 300.00

Adams Straight link powder coated black 140.00

Smoked Taillight by me with Smoked turn signals by Clear Alternatives 60.00

Brocks Performance TiWinder BLUE - 1200.00

Brocks / BST wheels 16" front 17" rear. sprockets, galfer rear rotor, yana shinki front rotors, tires included 3300.00

2x4 1510cc motor. Marine Crank 4+, carrillo rods, Adams/JE pistons, fast by gast trans, brocks shift shafts, adams case mods, Comp CNC oil gear, muzzys oil plate, new bearings,OSR Balancer deletes, ape head studs, adams 1.5" pan anodized black, 4000.00 = fresh, only has break in / heat cycles.

Zx14 cylinder head, handported with 395/.378 WEB cams, ape valve springs with Ti retainers, adjust cam sprockets 1500.00

Engine Is all together and running. All together price of 4800.00, included a 06/07 CLutch basket, 4 passes on a fresh clutch pack with "real street" clutch setup. Would cost over 9k to duplicate this setup with good cores

keyset 100.00

Gauges one cluster with 1691 miles 300.00 and another with 3988 miles 280.00

07 Candy Plasma Blue body, great shape with also a 08 zx10r front fender and brackets 850.00

Adams Chromoly SwingArm, 34" very clean with black anodized axle adjusters and bottle holder, 64-68" 750.00

GPR V1 blue with mount zx14 steering stabilizer. 325.00

Innovate DL-32 data logger 375.00

Adjustable lowered kickstand, cut and trimmed down for a real low bike. powdercoated black 50.00

throttle bodies, stock all taken apart. use for cores for boring. not 100% sure i have all the parts, but they are ready to be bored, swap all of your parts. 50.00

Stock subframe with a tiger undertail, all powder coated semi gloss black 150.00 will not separate.

Real Vortex gas cap and base, black 45.00

2 starters 40 ea
4 coils 15 ea or 45 for all.
zx14 RECTIFIER/REGULATOR 50.00

rear passenger pegs, powder coated semi gloss black with billet pugs filling the exhaust holes 40.00

stock rear sets powder coated semi gloss black 40.00

Two wheel werkz zx14 tank pivot. 55.00

Front fairing stay with mirror bracket, oem 55.00

06/07 ECU / Relay Box 150.00

08+ aluminum air filter door cover 10.00

Brake Calipers, fronts and rears with good life on the double HH pads. all have been powder coated semi gloss black. 150.00

Spiegler - Braided Brake Lines, Black lines with Blue Ends and Blue Bolts. 3 lines up front and a longer rear line for up to a 12" over arm. 165.00

OEM headlights, pair. great shape! 150.00

Radiator/hoses super clean low mile with a schnitz high pressure cap, extra fan, and a muzzys fan anodized black in the stock housing. 270.00


____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 13, 2012 05:28 PM        
Swing Arm SOLD, thanks.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 15, 2012 04:14 AM        
Muzzy SOLD
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 15, 2012 03:24 PM        
rear sets and passenger pegs are sold, thanks
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
rspauldi


Novice Class
Posts: 32
posted February 15, 2012 09:45 PM        
Compton, i spoke with u last week about the BST wheels. My concern was/is with the 16" front wheel. Would u be willing to separate the wheels and sell the rear wheel only? If interested pls call the number i provided earlier. Thank you, rick
  Ignore this member   
rspauldi


Novice Class
Posts: 32
posted February 15, 2012 09:47 PM        
Compton, i spoke with u last week about the BST wheels. My concern was/is with the 16" front wheel. Would u be willing to separate the wheels and sell the rear wheel only? If interested pls call the number i provided earlier. Thank you, rick
  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 16, 2012 05:57 AM        
quote:
Compton, i spoke with u last week about the BST wheels. My concern was/is with the 16" front wheel. Would u be willing to separate the wheels and sell the rear wheel only? If interested pls call the number i provided earlier. Thank you, rick


at this time i'd rather keep to two together.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 16, 2012 06:08 AM        
TiWinder and Straight Link SOLD
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
teh1337ftw


Parking Attendant
Posts: 4
posted February 17, 2012 11:37 AM        
I'll take the gauge cluster (cheaper one), fairing stay, filter, nitrous progressive controller, forks, and lower links if you have them.
  Ignore this member     
teh1337ftw


Parking Attendant
Posts: 4
posted February 17, 2012 11:39 AM        
I'll take the gauge cluster (cheaper one), fairing stay, filter, nitrous progressive controller, forks, and lower links if you have them.
  Ignore this member     
Compton


Zone Head
Posts: 969
posted February 17, 2012 11:46 AM        
quote:
I'll take the gauge cluster (cheaper one), fairing stay, filter, nitrous progressive controller, forks, and lower links if you have them.


only thing i have left is the lower mile gauge cluster out of that list.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
teh1337ftw


Parking Attendant
Posts: 4
posted February 17, 2012 11:56 AM        
i'll take that then
  Ignore this member     
teh1337ftw


Parking Attendant
Posts: 4
posted February 17, 2012 12:00 PM        
email me teh1337ftw @ gmail (dot) com
  Ignore this member     
Compton


Zone Head
Posts: 969
posted February 17, 2012 12:40 PM        
email sent.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
ama573


Parking Attendant
Posts: 30
posted February 18, 2012 12:44 PM        
Do you still have internally Lowered Forks,black anodized tubes, lower legs powder coated semi gloss black, straight never wrecked. 200.00? If so, how much is the drop?

  Ignore this member     
Compton


Zone Head
Posts: 969
posted February 18, 2012 03:11 PM        
quote:
Do you still have internally Lowered Forks,black anodized tubes, lower legs powder coated semi gloss black, straight never wrecked. 200.00? If so, how much is the drop?



sold already.

____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 18, 2012 03:12 PM        
this is all i have left, make some offers, but please keep in mind that price is with shipping.

Modified Adams Spray Bar with 8 nozzles for 2 stages, anodized black + NX solenoid, adams solenoid, braided and soft lines, with 16 and 25 jets. good for 150hp 350.00

zx14 catalyst race seat, bad shape, been repaired 60.00
Zx14 no name ebay fiberglass race seat 50.00

Adams / Litz Shock re-valved and shortern with new spring for 65" 180lb rider 300.00

Brocks / BST wheels 16" front 17" rear. 41,42,44 rear sprockets, front tire included 3100.00

keyset, ignition, helmet, gas and keys 100.00

GPR V1 blue with mount zx14 steering stabilizer. 325.00

Adjustable lowered kickstand, cut and trimmed down for a real low bike. powdercoated black 50.00

Stock subframe with a tiger undertail, all powder coated semi gloss black 150.00 will not separate.

Real Vortex gas cap and base, black 45.00

starter 40

4 coils 15 ea or 45 for all.

zx14 RECTIFIER/REGULATOR 50.00

Two wheel werkz zx14 tank pivot. 55.00

06/07 ECU / Relay Box 150.00

08+ aluminum air filter door cover 10.00

Brake Calipers, fronts and rears with good life on the double HH pads. all have been powder coated semi gloss black. 150.00

Spiegler - Braided Brake and Clutch Lines, Black lines with Blue Ends and Blue Bolts. 3 lines up front and a longer rear line for up to a 12" over arm. 165.00

Radiator/hoses super clean low mile with a schnitz high pressure cap, extra fan, and a muzzys fan anodized black in the stock housing. 270.00
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
rspauldi


Novice Class
Posts: 32
posted February 20, 2012 11:04 PM        
Hi 8rian, have u sold the BST's? i don't think the 16 in front will work for me but i am interested in the rear wheel if you can separate... Rick.spaulding@nsn.com pls provide ur best price as times are hard... Thanks
  Ignore this member   
rspauldi


Novice Class
Posts: 32
posted February 20, 2012 11:14 PM        
geez, my responses are not going thru... Brain, if u have the BST's left and can separate i wud be interested in the rear wheel. Rick.spaulding@nsn.com pls provide price for rear wheel only... Thanks
  Ignore this member   
rspauldi


Novice Class
Posts: 32
posted February 21, 2012 02:25 PM        
Hi Brian, I am still interested in the BST wheels but for my type riding the 17" rear is probably all that will work for me. Would you be willing to separate the wheels?. if so, how much for the rear wheel?

I have been having some problems replying lately so if this is a duplicate message pls accept my appology in advance... Rick

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 21, 2012 05:09 PM        
2000 for the rear wheel with sprockets
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
epd345


Pro
Posts: 1494
posted February 21, 2012 06:33 PM        
Tobin seat still available? Got any pics. Send to epd345@yahoo.com. Thanks
____________
2012 ZX14, Ceramic Coated Brock's CT Meg, PCV, throttlemeister

  Ignore this member   
Compton


Zone Head
Posts: 969
posted February 21, 2012 06:35 PM        
quote:
Tobin seat still available? Got any pics. Send to epd345@yahoo.com. Thanks


its sold
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14

  Ignore this member   
epd345


Pro
Posts: 1494
posted February 21, 2012 06:40 PM        
Tobin seat still available? Pics? email pics to epd345@yahoo.com Thanks
____________
2012 ZX14, Ceramic Coated Brock's CT Meg, PCV, throttlemeister

  Ignore this member   
wild751


Parking Attendant
Posts: 9
posted March 26, 2012 10:11 AM        
do you still have the subframe and undertail
  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > CLASSIFIEDS > Thread: zx14 everything performance NEW TOPIC POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.24581694602966 seconds processing time