LAB3

Needs a job
Posts: 2977
|
posted July 06, 2011 04:40 PM
Edited By: LAB3 on 7 Jul 2011 00:46
WTS Snap On Tools and Machinist Tools
Selling all my Machinist tools. O.D. mic set 6 mic set 0 to 6" in wooden box Mititoyo 103-933 ,6" Brown& Sharpe dial calipers jeweled, Mututoyo jeweled 12" dial calipers, SPI Sin Bar, Brown&Sharpe best Test Dial indicator sets one is in 1/10's or .001. old Universal Starrett Dial Indicator set,clamps for ID and OD Mag bases for all the indicators.
Allbright keyless chucks 3/4 and 5/8 shanks 1/8 to 5/8 and 0 to 1/4 inch, never seen a drill bit in them. Used for indicatin dowel pins in with. Just feeling out if anyone does this for a living I will make you a deal I have other tools.
Snal On Torque wrenchs 1/2,3/8 and 1/4 drive sets like new always set back at zero when stored in Snap On boxs. I have several of each in different pound and inch pounds settings, all were caliburted last year, all look like new.
Sell all or part Please just email me as I need time to look on ebay and see what they are worth and under cut that. I have not used them in years.
Thanks
Louis
Email me labartay@verizon.net
|
billeason
Zone Head
Posts: 711
|
posted July 07, 2011 05:06 AM
how much for the dial inc, sets ? And the O.D. mic set..LMK Thanks...........
____________
bill eason
|
LAB3

Needs a job
Posts: 2977
|
posted July 07, 2011 05:42 AM
Edited By: LAB3 on 7 Jul 2011 14:58
quote: how much for the dial inc, sets ? And the O.D. mic set..LMK Thanks...........
Bill send me your email my email is on the add. I will take pics of the Brown&Sharpe Best Test indicators they in the wodden boxs withthe clamps etc. Same with the mics.. I have not had time to research what they are worth yet.
Louis
The Brown@Sharpre BestTest are both 7030-3 in the wooden boxs .0005
with clamps swivels etc. They are in Great shape not all scratched up.Wooden boxs are ok but the indicators are like new :-) I took care of my tools. Used on a Bridgeport and I.D./O.D. centerless grinder back in day. :-)
I will sell both boxs for $240.00 shipped. with a mag base.
The o-6" OD mics with standards and box (box has a scratch or two and foam on lid inside is crap) but the mic's are like new never dropped
$310.00 shiped.
email me for pics.
|
billeason
Zone Head
Posts: 711
|
posted July 07, 2011 05:02 PM
I don't need pictures Lab. Ill send you a email in a bit, Thanks .....
____________
bill eason
|
LAB3

Needs a job
Posts: 2977
|
posted July 08, 2011 10:53 AM
quote: I don't need pictures Lab. Ill send you a email in a bit, Thanks .....
Thanks Bill :-) if you purchase both I will pay freight. 4 Cannons in the States Right? :-)
Louis
|
LAB3

Needs a job
Posts: 2977
|
posted July 09, 2011 07:57 PM
Mic's and indicators still for sale. These are Inspection grade mic's carbide tipped and friction wheel design and measure's 1/10 of a thousands of a inch. New $470.00 plus freight. Best Test Indicators are $169.00 each just for a indicator not the complete set with attachments and mag base.
|
LAB3

Needs a job
Posts: 2977
|
posted July 14, 2011 03:16 AM
quote:
quote: I don't need pictures Lab. Ill send you a email in a bit, Thanks .....
Thanks Bill :-) if you purchase both I will pay freight. 4 Cannons in the States Right? :-)
Louis
Thanks FOR NOT Emailing me and keeping me hanging thinking you had 1st Dibbs.
Second Time you have "FORGOT" to follow up and or just NOT keeping your word. By me trusting you
Again....... you cost me a sale........SEE... PING BILL EASON CCT thread here ZX-14 section.
Don't trust this guy.
|
LAB3

Needs a job
Posts: 2977
|
posted July 21, 2011 11:45 AM
Bump Snap On torque wrenches and other Snap On tools.
|
WARBIRD

Needs a job
Posts: 2739
|
posted July 21, 2011 01:59 PM
E-mail me Louis if you still have my address..............or PM me if you think it will work.......
____________
I'd Rather Be Roadracing.
|
LAB3

Needs a job
Posts: 2977
|
posted July 21, 2011 02:28 PM
quote: E-mail me Louis if you still have my address..............or PM me if you think it will work.......
Pm sent I have a new PC hard drive crashed. Or email me.
labartay@verizon.net
|
LAB3

Needs a job
Posts: 2977
|
posted July 31, 2011 12:38 PM
TTT
|
LAB3

Needs a job
Posts: 2977
|
posted August 08, 2011 03:07 AM
TTT
|
|