Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 28, 2011 07:53 AM
F/S Racetech Rear Spring ZX-14
The part number is SRSS-S5818107
Its a stiffer spring for you bigger guys.
$60 plus shipping
____________
Y2KZX12R
CompetitionCNC.com
   
|
dogg24
Expert Class
Posts: 322
|
posted April 28, 2011 10:46 AM
What weight and length is it set up for?
____________
2012 ZX14R SE, Streetmeg, PCV
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 28, 2011 05:50 PM
 Edited By: Y2KZX12R on 29 Apr 2011 01:54
You have to go to Racetechs web site and enter in your weight etc and it will tell you what spring you need.
____________
Y2KZX12R
CompetitionCNC.com
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted May 13, 2011 03:03 AM
up
____________
Y2KZX12R
CompetitionCNC.com
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted May 15, 2011 06:50 AM
perfect for guys that weigh over 200 pounds.
fits a zx14
____________
Y2KZX12R
CompetitionCNC.com
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 06, 2011 12:43 AM
I attempted to look up this spring by the part number you listed and could not find an exact match, Im thinking its this one "RT SK SPR 58.2x178 10.7kg-105N SRSP 5818107" Can you verify that this is the spring? If so I will buy it for my stretched 14. Thanks
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
horsinaround
Expert Class
Posts: 146
|
posted July 06, 2011 05:42 AM
I belive this is the rear spring I bought off Jim for my 14. I will check the number and let you know. I just picked up a flat link of another member so with this heavy spring and the flat link I belive it will be too much. I will check the number for sure. I know when I called raceteh to verify the spring they said the 5818107 was the correct number and it corresponds to the next to stiffest spring they make for the 14. But I will check the p/n again. I would do 60 shipped on it. email me at lincmeadowfarm@aol.com.
Jim sorry if you have another spring for sale. lol but I think this is the one I got of you.
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 06, 2011 09:05 AM
Email sent,
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
Ratfink
Novice Class
Posts: 93
|
posted July 12, 2011 09:36 AM
do you know what the spring rate is like my spring im running is 810
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 13, 2011 01:27 AM
bought it
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
|
|
HOME
NEW TOPIC