Big_T112
Pro
Posts: 1061
|
posted January 17, 2010 04:44 PM
 Edited By: Big_T112 on 18 Jan 2010 00:45
ZX-14 race parts and more for sale
Parting the bike this is the second round of stuff. A lot of this stuff can be ship in Postal flat rate boxes which is cheap the other stuff will have to go UPS. Lower 48 please. All parts are plus shipping. off of a 06 ZX14 with about 2700 miles.
McIntosh swingarm 65"-70" axle, bottle mount, Chain guard, built in airtank, lowering links and hugger custom made for arm. (use with or without hugger) $700 ($1350 new)
Penske shock with 750# spring, $450 ($830 new)
Gauges with 25-2700 miles on them, Mint with stay $200
MTC Muti-Stage lockup, pressure plate with Buttons, new clutch plates, Big CC Quick acess cover, complete tunning kit. $500
Tiger tail with MPS autoshift box, $150 with box, $75 without box
Mirrior block off's, Muzzy block off's, lowering strap and brackets, TRE $100
Big CC billet sealing Velocity stacks, Seals to frame for no air leaks, $200
Complete set of custom painted bodywork with 12 over tail and gastank.
has tail light but no headlights, just a blacked out cover. clean. $1000
here it is on the bike
  
|
Big_T112
Pro
Posts: 1061
|
posted January 17, 2010 04:58 PM
Edited By: Big_T112 on 18 Jan 2010 01:01
More Parts
Throttle with cables, Handlebar switches $75
Rad with fan, No leaks $150
Foot Pegs with rear brake Master Cylinder and lever $80
Front brake with bars and clutch lever/res. $100
Set of forks $200
Front and rear rims with shiko slicks mounted and Ceramic bearings installed. $350 for the wheels (rear not shown.
NLR AMS-500 Boost controler $250
06-07 CDI box $100
Power Comander for 06-07 and a Multi function hub, No bar switch $150
Mint Sub Frame $100
Reg $40
More to come. taylortim@bellsouth.net to get in touch with me.
|
jarhead
Expert Class
Posts: 418
|
posted January 17, 2010 05:14 PM
What did you have the shock set up for as far as rider weight?
|
Big_T112
Pro
Posts: 1061
|
posted January 17, 2010 05:50 PM
around 185LBS.
|
06redzx14
Pro
Posts: 1022
|
posted January 17, 2010 06:25 PM
Dibs on the tiger tail pm sent on psychobike
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
SixSixoh6
Zone Head
Posts: 660
|
posted January 17, 2010 09:21 PM
man you would post up some velocity stacks after i order some!!
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted January 18, 2010 06:40 AM
Would you consider selling the strap and bracket seperate??
Newf14
|
Big_T112
Pro
Posts: 1061
|
posted January 18, 2010 07:22 AM
cancel the order. get these. Lets see if the strap sells with the other stuff first.
|
1badvespa1400cc
Zone Head
power junkie
Posts: 691
|
posted January 18, 2010 12:56 PM
pm'd you on psychobike.
____________
Just another foeteen!!!!!
|
mikesrace
Parking Attendant
Posts: 11
|
posted January 18, 2010 04:11 PM
HI
I will take the gauges & bracket for $200. dollars & shipping ,you can paypal me at
mikes.transmission@hotmail.com
Thanks Mike
____________
mikesrace
|
mikesrace
Parking Attendant
Posts: 11
|
posted January 18, 2010 04:16 PM
Hi
gave you wrong e-mail should be mikes.transmission@hotmail.com
Mike
____________
mikesrace
|
Big_T112
Pro
Posts: 1061
|
posted January 18, 2010 04:28 PM
Gauges have sold and so has a lot of the other stuff. I am pending payments right now but will update the list Wed.
|
XLR8S
Novice Class
Posts: 63
|
posted January 18, 2010 05:29 PM
Hi
I'll take the sub frame. If you still have it, please send me a Pay-Pal request to hartwell9190@comcast.net shipping to 03104.
I wish I had seen the swing arm earlier, I "just" payed for one today :-(
I don't suppose you have an entire front end, Forks, trees, brake, wheel?
Thanks, Roger
____________
ZX14, 1 piece at a time............. Roger
|
NINJA12
Needs a job
Posts: 3310
|
posted January 18, 2010 06:22 PM
how much for the Big CC cover witha cluth spacer plate to trade if interested?
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 18, 2010 06:47 PM
pm sent on the swingarm weeeeeeeeeeee
|
tracrazor
Parking Attendant
Posts: 7
|
posted January 18, 2010 07:16 PM
Edited By: tracrazor on 19 Jan 2010 03:17
I sent paypal payment for speedo and pm'd you on Psychobike
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 18, 2010 07:20 PM
Big_T112 call me about the swingarm
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 19, 2010 01:21 PM
quote:
Big_T112 call me about the swingarm
wee
swingarm sold
wee
|
XLR8S
Novice Class
Posts: 63
|
posted January 20, 2010 03:30 AM
Good Morning
Do you still have the sub frame? I'll buy it if you do. Please Pay-Pal me at hartwell9190@comcast.net
Thanks, Roger
____________
ZX14, 1 piece at a time............. Roger
|
1badvespa1400cc
Zone Head
power junkie
Posts: 691
|
posted January 20, 2010 06:31 AM
How much for the tail,if the rest of the body work doesn't sell together?
____________
Just another foeteen!!!!!
|
thebigboy14
Novice Class
Posts: 54
|
posted January 20, 2010 12:10 PM
Howdy! question about the shock. which model is it? 8983?
____________
2007 ZX-14 Blue
2004 Triumph Daytone 955i(sold)
2000 ZX12r Green 1290 (SOLD)
|
NINJA12
Needs a job
Posts: 3310
|
posted January 21, 2010 02:13 PM
bumpy2bump
|
Fifty Thousand
Expert Class
Lovin My Family.
Posts: 204
|
posted January 22, 2010 12:11 AM
Still got the Power Commander? if so let me know ASAP. Send me an Email at wwgthousand@aol.com it will pop up on my phone and let me know. I will Paypal the money AS soon as I know you still have it available.
____________
|
kingtramp
Expert Class
Posts: 121
|
posted January 22, 2010 06:55 PM
Swingarm still for sale? If so please PM me ASAP
|
xxxRC51xxx
Parking Attendant
Posts: 1
|
posted January 22, 2010 11:31 PM
Clutch master
Are you willing to separate the clutch master from the brake? I only need the master, lever and reservoir. Don't need the bar at all.
|
|
|
HOME
NEW TOPIC