Shane661
Needs a life
Posts: 11494
|
posted December 27, 2009 11:56 AM
 Edited By: Shane661 on 27 Dec 2009 20:13
- Brock's CT Header and Midpipe -
I'm considering selling my Brock's CT Titanium Exhaust. This pipe has just the header and a short midpipe:
(prior to running):
(heat cycled):
I ran it with just a $15 exhaust tip on the midpipe:
Best Dyno #'s, on MR9:
It ran good enough to get me into the 8's, with only a wide-open throttle map. The pipe currently has about 3 hours of use on it. I'm considering a sidewinder setup for next season. Retail on the CT, with the full midpipe/muffler, is $1435. I would be looking to get around $875 shipped. Total weight of installed header and midpipe is right around 5 lbs. A muffler or exhaust tip will need to be installed. The tubing is metric, so a standard 2.25" muffler (such as a shortmeg) will not work.
If interested, pm me. I am still investigating my costs to switch to the sidewinder (ideally a TiWinder). Sale of this exhaust will be contigent upon me lining up a suitable replacement at a reasonable cost.
You can also email me at: Shane at warp12racing dot com
Shane
  
|
Bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 27, 2009 08:38 PM
i think you need a rotarty muffler
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
Bigbore4
Zone Head
Posts: 806
|
posted December 27, 2009 08:48 PM
Shane,
Can you check with USPS on shipping to Thailand?
Thanks
Geoff
|
Shane661
Needs a life
Posts: 11494
|
posted December 28, 2009 03:58 AM
Edited By: Shane661 on 28 Dec 2009 12:00
quote:
Shane,
Can you check with USPS on shipping to Thailand?
Thanks
Geoff
It looks like shipping would be around $80 - $85, including $800 in insurance. Delivery time is listed as 6-10 days, via USPS Priority Mail International service.
|
Shane661
Needs a life
Posts: 11494
|
posted December 28, 2009 07:44 AM
Edited By: Shane661 on 28 Dec 2009 15:53
CT header, left, showing increased ground clearance on #3 cylinder:
(notice dented header section on right)
|
Shane661
Needs a life
Posts: 11494
|
posted December 28, 2009 09:02 AM
Here is the cut midpipe:
There is no 02 bung in the system.
|
Shane661
Needs a life
Posts: 11494
|
posted December 28, 2009 11:23 AM
Edited By: Shane661 on 28 Dec 2009 19:26
Billet high-flow exhaust spigots:
|
jessejames82
Zone Head
Posts: 550
|
posted December 28, 2009 02:43 PM
shane call me 727 698 6846
____________
Orient Express Rider
SuperSport ZX 14
6.000 8th mile
|
Shane661
Needs a life
Posts: 11494
|
posted December 29, 2009 08:34 AM
Here is the pipe section that I cut off:
I still have it, and it will ship with the pipe.
|
Bigbore4
Zone Head
Posts: 806
|
posted December 29, 2009 08:42 AM
That'll weld up just fine. What size is the end flange?
|
Shane661
Needs a life
Posts: 11494
|
posted December 29, 2009 09:03 AM
|
Bigbore4
Zone Head
Posts: 806
|
posted December 29, 2009 02:13 PM
Thanks Shane, I'll let you know tomorrow.
|
kaw-rick
Pro
Posts: 1167
|
posted December 29, 2009 03:37 PM
Shane, what ya gonna do with the old header with dent? im trying to piece a system together. i have midpipe and smeg already. thanks.
|
Shane661
Needs a life
Posts: 11494
|
posted December 29, 2009 04:23 PM
quote:
Shane, what ya gonna do with the old header with dent? im trying to piece a system together. i have midpipe and smeg already. thanks.
I have the dented section, it is just the #3,4 pipe and spigots. I sold the rest of the header with a new pipe section.
|
kaw-rick
Pro
Posts: 1167
|
posted December 29, 2009 04:31 PM
What ya want for that piece? I got 1 smashed shut. Interested in spigots also.
|
Shane661
Needs a life
Posts: 11494
|
posted December 29, 2009 04:34 PM
Edited By: Shane661 on 30 Dec 2009 00:35
pm sent.
|
Shane661
Needs a life
Posts: 11494
|
posted December 31, 2009 08:31 AM
SOLD
|
Shane661
Needs a life
Posts: 11494
|
posted January 04, 2010 12:20 PM
Edited By: Shane661 on 4 Jan 2010 20:21
A great deal on a Muzzy M14 ($475!) can be found here:
http://www.bikeland.org/board/viewthread.php?FID=3&TID=51797&set_time=
I ran an M14 last year, with very good results. This is not the standard Muzzy, it has the larger primary tubes and midpipe. 
|
|
|
HOME
NEW TOPIC