chunter
Expert Class
Posts: 195
|
posted November 20, 2007 05:39 AM
FS 06 ZX14 Superstreet set up
2006 Black ZX14, 350 miles. Bike is set up for SuperStreet and went a best of 8.18 & several 20's at the Finals and shifts every pass now. Not one bearing has been spun in this motor all year & not one blown head gasket or hurt valve.
specs:
- 4mm stroker crank
- stock bore custom NOS pistons
- Carillo H beam rods
- Coby Adams ported head
- APE heavy duty valve springs with Ti retainers
- APE cam chain tensioner and cam sprockets
- Coby Adams cut transmission
- MTC 2 stage lock up with cover
- Coby Adams modified Stock arm
- NOS wet kit with spray bar in air box to spray each cylinder
- TSUKIGI black ceramic coated sidewinder
- Schnitz progressive NOS controller
- Schnitz EFIR
- Coby Adams billet oil pan with Two Wheel Werks custom pan
- Two Wheel Werks tank pivot
- GPR steering damper
- CO2 air shifter set up
- Power commander
- Naarden adjustable links
- Adams straight link
- 17/43 Vortex sprockets
- APE cyclinder studs
- Tiger aluminum under tail
Bike is for sale as is no parting out. Serious inquiries only. $20,000.00
  
|
ninja12
Needs a job
Posts: 3310
|
posted November 20, 2007 05:55 AM
Coby Adams billet oil pan with Two Wheel Werks custom pan
What?
|
chunter
Expert Class
Posts: 195
|
posted November 20, 2007 06:34 AM
Billet Adams oil pan with Two Wheel Werks custom catch pan underneath it. It is used in place of a ballistic blanket as required by Prostar rules.
|
badzx14
Expert Class
needs more power!!!!!
Posts: 126
|
posted November 20, 2007 09:40 AM
any pics?
|
chunter
Expert Class
Posts: 195
|
posted November 20, 2007 10:21 AM
Yes, just not able to post them here.
|
chunter
Expert Class
Posts: 195
|
posted November 20, 2007 10:21 AM
I'll even freshen up the motor for the new owner with new rod & crank bearings and valve springs.
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted November 20, 2007 11:30 AM
check out www.photobucket.com upload yr pics there then cut n paste the img code into yr next post (its free)
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
chunter
Expert Class
Posts: 195
|
posted November 20, 2007 01:19 PM
http://img.photobucket.com/albums/v726/chunter/ZX14atAtco.jpg
|
chunter
Expert Class
Posts: 195
|
posted November 20, 2007 01:19 PM
|
chunter
Expert Class
Posts: 195
|
posted November 26, 2007 12:27 PM
Will freshen up engine, new bearings and rings, and help new owner with tune up/settings at Prostar events.
Bike is capable of 8.0's and 7's with rider specific shock and better rider.
|
chunter
Expert Class
Posts: 195
|
posted November 27, 2007 05:04 PM
$19000
|
chunter
Expert Class
Posts: 195
|
posted December 03, 2007 04:14 AM
bump
|
chunter
Expert Class
Posts: 195
|
posted January 10, 2008 07:27 AM
Motor will be freshened up with new valve springs and bearings within the next week so it'll be race ready and capable of 8.0's
|
BlackMagic14
Needs a job
Posts: 2058
|
posted January 10, 2008 12:46 PM
Chip if you decide to part it out, I want the arm, the NOS kit and spray bar, and the progressive controller. Not in any hurry, I hope you sell it but if you do decide to part it I GOT DIBBS LOL
|
chunter
Expert Class
Posts: 195
|
posted January 11, 2008 12:02 PM
Only parts I might part out would either be to trade the motor for $ and a fresh stocker, lock up, and maybe arm (but that'll be 60+ days from now).
|
ninja12
Needs a job
Posts: 3310
|
posted January 11, 2008 01:03 PM
 Edited By: ninja12 on 11 Jan 2008 13:06
will that arm go out to 68" ? LMK
second dib.
|
madmike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted January 11, 2008 04:46 PM
quote:
Will freshen up engine, new bearings and rings, and help new owner with tune up/settings at Prostar events.
Bike is capable of 8.0's and 7's with rider specific shock and better rider.
You are not going to find a much better rider then yourself that is for sure!
someone is going to get one hell of a bike!!!!
MM
____________
200-MPH CLUB MEMBER!
|
chunter
Expert Class
Posts: 195
|
posted January 11, 2008 06:39 PM
Yes, arm will go to 68". It was built by Coby Adams and is a +3 to +9 over stock, even has a cut out for the fuel pump to go into rather than hitting the arm.
|
chunter
Expert Class
Posts: 195
|
posted January 13, 2008 06:33 PM
reduced to $17000, needs to go here soon so I can get the other project(s) done
|
chunter
Expert Class
Posts: 195
|
posted January 16, 2008 07:43 PM
Willing to trade the motor for a good stocker plus $4500 cash.
|
chunter
Expert Class
Posts: 195
|
posted January 23, 2008 12:32 PM
Motor will be freshened up and ready to swap for stocker & $ late next week.
Bolt it in and go racing. Cheaper than building from scratch.
|
chunter
Expert Class
Posts: 195
|
posted February 02, 2008 10:30 AM
Bike and or motor needs to go this week. Make me a reasonable & serious offer on the bike race ready. No lower than $4500 exchange on the motor.
|
turbo1k
Parking Attendant
Posts: 20
|
posted February 02, 2008 05:57 PM
Any interest in a trade+cash for the bike(?)
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted February 03, 2008 08:36 AM
someone is going to get a killer deal.....
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
chunter
Expert Class
Posts: 195
|
posted February 03, 2008 08:08 PM
What do you have to trade?
|
|
|
HOME
NEW TOPIC