matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 19, 2007 12:14 PM
FS: Marchesini wheels (cast magnesium)
Marchesini Rims (ZX-12R) - Cast magnesium, powder coated gloss black. Comes with all spacers, the hub that bolts to the rear brake rotor, a stock 12R brake rotor (already bolted to the hub). Cush drive, cush pads, Sprocket Specialist's hardened steel 46t sprocket (stock 12R sprockets don't fit).
I talked to a couple people about these wheels, one person found a deal on some other rims, the others I can't find your emails/PMs.
After I took the rims off the bike, I took them into town to have the tires taken off. In the process, the place put a big ole chip in the powder coat of the rear wheel. The rear wheel was RE-powder coated the same gloss black. Also, because they had to remove the rear bearings, I had them install brand new rear bearings.
You'll notice in the picture that the rear wheel does not have the "MARCHESINI" sticker on the edge of the rim. It's just a sticker, I bought some on Ebay a few years ago for like $5. The front stickers are in ok shape, but I'd probably change them out to match the rear.
These are 12R wheels. Might fit other bikes, I'm not sure.
$1150 + shipping.
____________
Some day, you're going to run out of some days
   
|
Seth ZX12r UK
Expert Class
Posts: 238
|
posted March 19, 2007 11:54 PM
You have a PM
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 20, 2007 01:07 PM
Since the question was brought up...
The front wheel, without the rotors on it, weighs right around 7lbs.
The rear wheel, with cush and rotor, weighs about 12lbs.
All on my bathroom scale, which seems to agree with the published weights for the wheels (cast magnesium).
|
shiphteey
Needs a job
Posts: 2529
|
posted March 20, 2007 07:25 PM
Sounds about right, inline with my 6.5 front and 11.5 rear dymags....mine were completely empty...did your wheels have bearings in them? That would make the difference....then again we're not using 'Hi Tech" scales either!
A.
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 20, 2007 08:55 PM
Yup, bearings and spacers are in the wheels.
|
rquinn
Expert Class
Posts: 228
|
posted March 20, 2007 08:57 PM
Nice set of rims B
____________
RON QUINN
|
say-what-u-want
Expert Class
Posts: 296
|
posted March 21, 2007 12:25 AM
Hey Matt lets wheel and deal
____________
it's all good(laugh now cry later fools)
|
shiphteey
Needs a job
Posts: 2529
|
posted March 21, 2007 10:48 AM
then those wheels weight right about what mine did...good luck on the sale Matt...thats a fair price!
A.
|
1adam12
Expert Class
Posts: 292
|
posted March 21, 2007 05:50 PM
Damn matt im already working alot of overtime to buy stuff from u. Your going to work me to death LOL. If those dont sell in couple weeks im going to buy these also. Stop posting nice zx12 shit!!!!!!!!
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 23, 2007 11:18 AM
quote:
Since the question was brought up...
The front wheel, without the rotors on it, weighs right around 7lbs.
The rear wheel, with cush and rotor, weighs about 12lbs.
All on my bathroom scale, which seems to agree with the published weights for the wheels (cast magnesium).
Another couple of questions raised recently. If anyone else is curious.
Q - What "model" are the wheels ?
A - I'm not sure. All the info I could find on them just stated "Marchesini cast magnesium 5 spoke".
http://www.oppracing.com/products.php?id=326
http://www.marchesiniwheels.com/ENG/Racing/racingproductline.htm
Nice article comparing aftermarket wheel weights.
http://www.rc51.org/wheel.htm
Q - What was the year of manufacture ?
A - The only markings on the wheels at all is "01 01" stamped into the cush drive section of the rear wheel. Maybe indicates 2001?
I bought the bike with the wheels on it, in May 2004 from JimP (a member here). After some searching on this site, it appears that Jim bought the wheels brand new in Feb 2002 from TAW. So a 2001 manufacture date sounds correct.
This is a pic of the bike from when Jim owned it.
Other pics from after I bought it from him. Wheels visible in most pics.
Krissten on bike.
Deal's Gap VII about 3 days after buying it from Jim.
Drag racing at Gainesville. Stock rim on the back with a Shinko. Only made a few passes with the rear Marchesini.
____________
Some day, you're going to run out of some days
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted March 28, 2007 07:19 PM
What sprocket pattern do they take..............
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 29, 2007 09:31 AM
I'm not 100% certain on the sprocket pattern. I only used the one sprocket, and that came with the bike/wheels when I bought it.
____________
Some day, you're going to run out of some days
|
say-what-u-want
Expert Class
Posts: 296
|
posted March 29, 2007 11:52 AM
pm sent
____________
it's all good(laugh now cry later fools)
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted April 02, 2007 01:54 PM
do you still have them?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted April 02, 2007 09:22 PM
quote:
do you still have them?
yup 
____________
Some day, you're going to run out of some days
|
hg
Novice Class
Posts: 32
|
posted April 06, 2007 12:29 PM
You have a PM...
|
zuminazx
Expert Class
Posts: 128
|
posted April 13, 2007 07:51 AM
sold?
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted April 13, 2007 07:57 PM
Nope, still available
____________
Some day, you're going to run out of some days
|
jaws12r
Novice Class
Posts: 45
|
posted April 18, 2007 01:20 AM
just PMed u matt buddy
|
jaws12r
Novice Class
Posts: 45
|
posted April 20, 2007 02:58 AM
matt u there ?? i just PMed u again buddy
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted April 20, 2007 12:12 PM
yeah man, replied.
____________
Some day, you're going to run out of some days
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted May 01, 2007 12:27 PM
new price
$1100 shipped within the US.
____________
Some day, you're going to run out of some days
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted May 01, 2007 06:44 PM
PM me your BEST price
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted May 06, 2007 05:20 PM
$1000 + shipping.
____________
Some day, you're going to run out of some days
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted May 14, 2007 01:03 PM
I've had atleast EIGHT people email or PM me about these. All saying something like "serious buyer, cash in hand, etc...". ALL of them will ask about shipping from me (85629) to them, which has run right around $45 to pretty much anywhere in the continental US. Then, NO replies after that.
____________
Some day, you're going to run out of some days
|
|
|
HOME
NEW TOPIC