matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 12, 2007 11:00 PM
FS: Carpenter Racing Engines cylinder head ('00 12R)
Carpenter Racing Engines Cylinder Head - CNC ported '00 12R cylinder head. Stock valves and springs.
This head with a JE superlite 3mm piston kit (1287cc), stock camshafts (non-degreed), made 195rwhp 105lb-ft on a DJ250 @ Stock Mild to Wild in Jacksonville, FL. On a 63in 12R with my 220lb self, ran 9.20s @ 150-153mph.
It has about 10,000 miles on it. I just took it off the motor, haven't cleaned it up. Never had any issues with it, valves/springs or otherwise.
$650 + shipping.
____________
Some day, you're going to run out of some days
   
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 13, 2007 04:20 AM
I sold one I had for 850!!! so this is a screaming deal!!!!
good luck on the sale
____________
200-MPH CLUB MEMBER!
|
entropy
Moderator
Posts: 8671
|
posted March 13, 2007 08:19 AM
it sure is a screamin' deal; just don't let that cam cap get separated from that head 
____________
This moderator uses moderation in moderation
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 13, 2007 08:56 AM
10-4 !!!
Just to make certain... the cam cap does come with the head.
If someone wants, I'll make a combo deal with the cams, valve cover (w/muzzy block offs) and the cam chain tensioner listed elsewhere. 
____________
Some day, you're going to run out of some days
|
say-what-u-want
Expert Class
Posts: 296
|
posted March 14, 2007 10:40 AM
 Edited By: say-what-u-want on 14 Mar 2007 11:45
HEY MATT PAY PAL HAVE BEEN SENT on the other parts GIVE ME A CALL SHAW
____________
it's all good(laugh now cry later fools)
|
blubyu
Expert Class
Posts: 209
|
posted March 14, 2007 07:37 PM
Will the 00 head work with 02 bikes?
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted March 15, 2007 08:11 AM
Matt, can you take some very close up well lighted focused shots of the combustiuon chamber and ports...
Looks like a good deal.
____________
Y2KZX12R
CompetitionCNC.com
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 15, 2007 10:01 AM
I'll try to clean it up a bit and take some more pics. As it is, that's exactly how I pulled it off the bike.
You can see the CNC machining in the intake ports in the first two pics.
I'll just put the pics up in this post. thanks!
____________
Some day, you're going to run out of some days
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 15, 2007 10:02 AM
quote:
Will the 00 head work with 02 bikes?
I *think* it can be done, however I know that some of the parts are different like the motor mounts and maybe a cam sensor. Mad Mike or Osti33 could probably give you a better idea.
____________
Some day, you're going to run out of some days
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 15, 2007 10:10 AM
drill and tap the head for the motor mounts and change the cams and sensor it should work fine.
____________
200-MPH CLUB MEMBER!
|
osti33
Needs a job
Posts: 2973
|
posted March 15, 2007 02:38 PM
Edited By: osti33 on 15 Mar 2007 15:42
quote:
Will the 00 head work with 02 bikes?
Yes.
You can also run your 02 cams as long as you swap the sensor off your 02 head. Then all you would need to do is drill and tap the motor mount holes in the 00 head install your cams and cam sensor off your 02 head and you are ready to roll. 
|
osti33
Needs a job
Posts: 2973
|
posted March 15, 2007 02:44 PM
quote:
Matt, can you take some very close up well lighted focused shots of the combustiuon chamber and ports...
Looks like a good deal.
Jim,
If you are interested I have a Carpenter head with one blown up combustion chamber(the other 3 are fine) I can send you to look at if you want. Let me know.
|
say-what-u-want
Expert Class
Posts: 296
|
posted March 17, 2007 11:39 AM
hey matt u the man thanks a lot
____________
it's all good(laugh now cry later fools)
|
1adam12
Expert Class
Posts: 292
|
posted March 17, 2007 02:30 PM
hey matt this is adam bolding if this is still for sale it is now sold!!!!!!! email me at adambolding@aol.com
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted March 19, 2007 12:14 PM
Sale Pending !!!
____________
Some day, you're going to run out of some days
|
ricksgsxr
Zone Head
Posts: 511
|
posted March 19, 2007 04:01 PM
Something happened to the 12 or just parting it out? or buying a k7 Lol!
Rick
|
jaws12r
Novice Class
Posts: 45
|
posted March 30, 2007 11:23 PM
quote:
Sale Pending !!!
\
is it still for sale? just PMed u buddy
|
jaws12r
Novice Class
Posts: 45
|
posted April 02, 2007 12:32 PM
Heelllllllllooooooo Matt u there ??
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted April 02, 2007 09:24 PM
doh, sorry man, this sold a little while back.
____________
Some day, you're going to run out of some days
|
matt sterbator
Pro
Hiding in the bushes
Posts: 1367
|
posted April 03, 2007 07:27 PM
SOLD quote:
Carpenter Racing Engines Cylinder Head - CNC ported '00 12R cylinder head. Stock valves and springs.
This head with a JE superlite 3mm piston kit (1287cc), stock camshafts (non-degreed), made 195rwhp 105lb-ft on a DJ250 @ Stock Mild to Wild in Jacksonville, FL. On a 63in 12R with my 220lb self, ran 9.20s @ 150-153mph.
It has about 10,000 miles on it. I just took it off the motor, haven't cleaned it up. Never had any issues with it, valves/springs or otherwise.
$650 + shipping.
____________
Some day, you're going to run out of some days
|
busakilla2000
Novice Class
Posts: 58
|
posted April 05, 2007 11:24 PM
if anyone's interested i have the same head for sale. give me a call @ 919-247-9343
____________
if u see the green light,ur too late i've already left
|
jaws12r
Novice Class
Posts: 45
|
posted April 06, 2007 09:30 AM
Pics? Price?
|
|
|
HOME
NEW TOPIC