kz2zx
Pro
Nobody in Particular
Posts: 1166
|
posted December 18, 2005 04:04 PM
 Edited By: kz2zx on 20 Dec 2005 16:03
1/4 turn D-Ring DZUS Fasteners
As some of you may know, I sell DZUS D-Ring fasteners on eBay and to racers. This funds my race tire budget - I typically make enough in one sales cycle of fastener assemblies to buy two sets of racing tires.
This means my margin is not large - I sell relatively close to cost, and at about 1/2 the price the online places charge.
I'm selling genuine DZUS/Panex steel parts, not the cheap knockoff aluminum parts you may see on the Web. These are the slip-on kind, see the pic below. The DFCI (spring-type) studs or receptacles are not compatible with these, and I don't carry that brand.
I'm selling them on ebay here. If this auction has ended, you can find later ones if you use the "View Sellers Other Auctions" link.
I will also sell them to racers and board members direct. Email me if interested.
$19.50 plus shipping for six studs, six receptacles, and 12 washers.
BTW, I can ship them to Canada for about $2.40-ish for the first six, and some amount more for more than six.
For shipping, I charge my actual expenses - postage (USPS) and the envelope, label, and ink. The first six plus envelope weigh 3.2 oz, each six more weigh about 3 oz more.
I'd really prefer to use PayPal for this, rather than do cash or checks, to save me the accounting headaches, but I'll do snail mail, too - subject to remaining stock on hand. I'll try to reserve some for you if you tell me you're doing snailmail.
These are Dzus/Panex part D3-316-412-190.
They are a 6mm stud with a 12mm shaft (L dimension below), meant to grab a Total Material Thickness of between 4.5 and 5.4mm. I'm shipping them with 2 0.5mm retainer/washers, and most bodywork I've seen is about 1-1.8mm thick per panel. If yours is thicker, bend the tab on the recepticle or omit one of the retainer/washers (the one on the outside...). For the street guys - these probably won't work for you since ABS plastics are typically thicker than race 'glass, and I don't have longer studs (they don't sell well).
Thanks for looking!
dave howell
____________
ASMA 47
WERA 147
www.dhowellbooks.com
  
|
HOME
NEW TOPIC
