01smokes
Needs a job
Posts: 2243
|
posted December 28, 2012 11:39 AM
whats the biggeat injectors?
What's the biggest injectors anyone has ran on a zx14 and still tuned with a PC?
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
  
|
08smokes
Expert Class
God is love.
Posts: 113
|
posted December 28, 2012 12:14 PM
7
|
01smokes
Needs a job
Posts: 2243
|
posted December 28, 2012 01:08 PM
quote:
7
Seven?
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Slow14_Fz1
Novice Class
Posts: 83
|
posted December 28, 2012 01:16 PM
I have 850cc dynamic injectors and it was a pain to tune for off boost I have a 3 bar map sensor on it now for on boost
____________
08 zx14 Turbo 17lbs 8.84@159 spinning
2012 zx14r NA 5.93@118 9.30@147 best 1.37 60'
|
01smokes
Needs a job
Posts: 2243
|
posted December 28, 2012 01:55 PM
quote:
I have 850cc dynamic injectors and it was a pain to tune for off boost I have a 3 bar map sensor on it now for on boost
Text me I lost your number
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
06redzx14
Pro
Posts: 1022
|
posted December 28, 2012 03:27 PM
Smokes do you have a set already? I'm looking for some 525 or 625s
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
01smokes
Needs a job
Posts: 2243
|
posted December 28, 2012 03:41 PM
quote:
Smokes do you have a set already? I'm looking for some 525 or 625s
I have a set of 440s in my turbo bike now. But I have two sets of 800s. I'm switching over to e85 on it now
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
06redzx14
Pro
Posts: 1022
|
posted December 28, 2012 06:00 PM
440s are stock right?
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
01smokes
Needs a job
Posts: 2243
|
posted December 28, 2012 06:06 PM
quote:
440s are stock right?
440s are stock 06-07s 08 and up are 330s IIRC
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Swiftkart
Expert Class
Posts: 349
|
posted December 30, 2012 04:24 PM
We just tuned a 06 Busa with ID 1000's on E85 with a 3 bar map sensor, idle and rides like stock down low, got rid of the secondary injectors with this setup, the ID 850's are a good injector as well.
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted December 30, 2012 04:46 PM
Actually the 06-07 are 430 and the 08-11 are 360..... the 2012 is 380
We run bosch EV-14 550's in our 1500+cc motors we build for our customers.
These are all motor and we found the BSFC to be .1-.15 lower than with other injectors.
The ev-14 injectors are the best injectors you can buy. no other injector we have tested can even come close to the BSFC we are seeing with them.
____________
Y2KZX12R
CompetitionCNC.com
|
01smokes
Needs a job
Posts: 2243
|
posted December 30, 2012 08:23 PM
quote:
Actually the 06-07 are 430 and the 08-11 are 360..... the 2012 is 380
We run bosch EV-14 550's in our 1500+cc motors we build for our customers.
These are all motor and we found the BSFC to be .1-.15 lower than with other injectors.
The ev-14 injectors are the best injectors you can buy. no other injector we have tested can even come close to the BSFC we are seeing with them.
Even better than IDs??
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Big_T112
Pro
Posts: 1061
|
posted December 31, 2012 11:10 AM
How about those new Injectrons? I hear some big HP numbers out of them. A version of the lectrons but made into FI.
|
Oz Booster
Expert Class
Posts: 230
|
posted December 31, 2012 01:17 PM
My understanding of ID's is , they were supercalibrated EV-14's sold as sets that matched flow within .000 whatevers , and now there not, just another ev14s
|
|
|
HOME
NEW TOPIC