joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 10:39 AM
wana run 5.4 or better
im having compition cnc build me a 1530 , should be arouns 220-230 hp when done, Bike is 6 in over right now . thinking bar or 10-12 over . were could i drop waight ? were should i start ?
  
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted September 13, 2012 10:59 AM
how much do you weigh and what bike is it?
____________
Shorty's Performance
Team Madness Racing
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 11:00 AM
i waigh 190 but can drop 15 lbs np . its a 09 ex super sport bike.
|
08smokes
Expert Class
God is love.
Posts: 113
|
posted September 13, 2012 11:30 AM
Forged Aluminum Wheels will run you around 2k and will shave off about 10-11lbs of unsprung weight. A lightweight battery will help as well- another 8lbs or so for $150.00.
Mike
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 01:08 PM
whats a good battery to run? would a bar help were i only do 1/8 mile ?
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 01:18 PM
No need for a bar. Get a hays clutch and make the bike low and long. You will have the power
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 01:20 PM
Shoria battery, shaved off 11.2 lbs for me.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
1badzx12r
Needs a life
Posts: 8321
|
posted September 13, 2012 01:24 PM
quote:
No need for a bar. Get a hays clutch and make the bike low and long. You will have the power
nawh them hays clutches don't work 
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 01:30 PM
quote:
quote:
No need for a bar. Get a hays clutch and make the bike low and long. You will have the power
nawh them hays clutches don't work
You need to empty some of the sand out of your bag Squatch.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 01:56 PM
i have a nos kit with 30 shot but in 1/8 mile is hard to use. ill go with the battery and lil things . my best 60 foot was 1 1.49 so got alot to work on
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 02:04 PM
You can use a 30 right out of the hole if you have the stuff to go with it.
Shock, clutch, 70+" arm, cut seat or no seat, also, lose a front rotor and cut the forks, add a pan and get a sidewinder. May want to get a catalyst tank also.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 04:41 PM
how much over is the arm to bring it to 70"? i have a catalsyt seat and how do u set the nos up to use it out the hole? id be scared to flip it.
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 04:48 PM
Micro storm progressive nos controller- Schnitz has it.
A 12-14" arm is what you need, stock wb is 57.5".
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
cas15
Expert Class
Posts: 331
|
posted September 13, 2012 05:00 PM
quote:
Shoria battery, shaved off 11.2 lbs for me.
how long do those battery stay charge ?
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 05:05 PM
with 12-14 over wont it spin more? flat tire it or stick with 008 ?
|
JZX
Zone Head
Posts: 943
|
posted September 13, 2012 05:35 PM
See alot of bikes that long hookin- get a shock, yes you can run a shinko slick.
Trial and error- set the bike up and get to the track, tune the clutch while there.
Unless your trying to grudge race on the DL, find someone around there to help with the build and set up. It won't hurt to ask.
GET A CLUTCH
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted September 13, 2012 05:59 PM
 Edited By: BLK ICE on 14 Sep 2012 02:08
220-230hp is going to hit like a 50-60hp shot of nitrous on a stock motor, keep that in mind when developing your new set-up.
Becareful and have fun.
Search "Shane's build thread" for weight shaving ideas.
http://www.bikeland.org/board/viewthread.php?FID=27&TID=40269&pagenumber=26
BLK ICE
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 06:35 PM
up here is no one that does this stuff last guy that helped cost me 2 grand on my motor . put a bearing in wrong. im going new crank , je pistons and trying to aford falcon rods. my shock is completly adjustible and im on lowest setting at 6in over so i can go 10-12 over with my spring. ill start with waight and gearing with new arm.
|
Audio
Expert Class
Posts: 117
|
posted September 13, 2012 06:37 PM
Edited By: Audio on 14 Sep 2012 02:38
my compition cnc built 1414 has been 5.38 in Texas heat, you shouldn't have any trouble getting there with that big motor, and I bet it will do more than 220-230 hp
At least 12 over
wheel and battery easy place to start, headlights if its race only
____________
Audio
2008 ZX14 Old Gray CNC-1414 old new CNC ?
2012 ZX14R SE Green CNC-?
|
joseph702
Zone Head
Posts: 598
|
posted September 13, 2012 06:40 PM
ya race only or day riding only. have a 08 14 set up for street. jim at cnc is a great guy to deal with. he has my work from now till the day i give up. what hp do u run with ur 1414?
|
quick6
Expert Class
Posts: 257
|
posted September 14, 2012 04:03 AM
first pass on my new 1417 last night with no tuning and true hand clutch was 5.50 with a 1.32 60ft. so i know it will go 40s maybe even hight 30s when i get my 60s back down to where they are supposed to be. thats with a cleaned up head i ported and stock cams.
____________
2006 zx14, fully dressed and sliding(Charlie Sheen)
|
quikgix
Expert Class
Posts: 274
|
posted September 14, 2012 06:22 AM
With Madness (Shorty) riding my bike he went 5.44@131mph with a ported head degreed cams 47mm TB's and stock bottom end.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
Audio
Expert Class
Posts: 117
|
posted September 14, 2012 06:50 AM
Quik what fuel you run on gas? off gas?
____________
Audio
2008 ZX14 Old Gray CNC-1414 old new CNC ?
2012 ZX14R SE Green CNC-?
|
joseph702
Zone Head
Posts: 598
|
posted September 14, 2012 07:50 AM
im running gas but gana run mr12 were its gana be race only. i have no air shifter i run oem clutch and brocks springs and spacers
|
quikgix
Expert Class
Posts: 274
|
posted September 14, 2012 01:37 PM
That was with MRX01 on motor.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
|
|
HOME
NEW TOPIC